Specialist technician on site
HVAC & refrigeration technician in Al Samer
In Al Samer, east Jeddah, where modern and mid-range villas are common, an AC or fridge failure always comes at the worst time. Alrabih's team inspects the unit calmly, explains the cause and solution, then makes the correct repair.
- Accurate diagnosis
- Clear explanation first
- One visit
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When to book a technician visit
- 1
AC that no longer cools properly
The unit runs but the air is barely cool, you hear knocking from the indoor head, or you find water on the wall. The technician brings pressure gauges and electrical test tools and finds the cause before starting any repair.
- 2
A fridge or cold room in your shop
The fridge does not hold temperature, or the compressor runs without cycling off. Stock loss starts before you notice the fault. The technician comes to your shop, checks the circuit and tells you the real condition of the unit.
- 3
A sudden fault with no obvious cause
The AC trips the breaker, runs without cooling, or gives off a smell. These symptoms can have different causes. The technician checks the board, compressor, capacitor and coil in the right order and explains what he finds.
Who it's for
Your AC keeps tripping the breaker and you need answers
The technician visits your home with electrical test tools, checks the board, capacitor and compressor in order, and explains the real cause before starting any repair.
Ask on WhatsAppYour shop fridge is not holding temperature and stock is at risk
The technician comes to your shop, checks the refrigeration cycle, compressor and coil, and tells you the real condition of the unit before you lose refrigerated stock.
Ask on WhatsApp
What the visit covers
- Pressure check with gauges
- Capacitor and electrical test
- Coil and drain inspection
- On-site refrigeration diagnosis
- Fault explained before work
How we work
How we work
- 1
Describe the fault
WhatsApp the unit type and what you are seeing, such as a noise, no cooling or water, and your district, and we arrange the visit.
- 2
On-site inspection
The technician arrives with pressure gauges and electrical test tools, inspects the unit in the correct sequence in front of you and does not start any work until the inspection is complete.
- 3
Explain and agree next step
After the inspection the technician explains the real cause and what the repair needs, then starts work only after you agree on what will be done.
- 4
Repair and run test
The technician carries out the agreed repair and runs the unit in front of you to confirm the fault is cleared and the unit is working properly before he leaves.
A qualified technician or a quick fix?
| Alrabih | The usual way | |
|---|---|---|
| Test tools | Pressure gauges and electrical meters | Guesswork diagnosis |
| Explanation before work | Cause and step agreed first | Starts without telling you |
| Visit scope | AC and fridge in one visit | One unit only |
| Repeat calls | Root cause found | Fault comes back |
| Equipment covered | AC and commercial refrigeration | AC only |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Samer is a recently developed area with villas of varying sizes and residential buildings on wide streets with regular layouts, making buildings and outdoor units easy to reach. Yet rapid development means building ages vary, and some newer villas have complex modern AC systems that need a technician who understands current technology.
Al Samer lies in east Jeddah, a recently developed area of villas and residential buildings on regular, wide streets.
Most modern villas in Al Samer are fitted with high-efficiency split units or smart AC systems and need careful inspection of electrical components and sensors.
The AC setup in Al Samer
- 1
High-efficiency split units
Modern villas in Al Samer typically use high-efficiency split units with energy-saving technology.
- 2
Connected smart AC systems
A growing number of villas have smart AC systems that control temperature remotely via a mobile app.
- 3
Display fridges in shops and villas
Some villas and small shops in Al Samer use commercial display fridges that require specialized servicing.
Before the visit
Before our visit in Al Samer
- 1
Identify the outdoor unit and power lines
Tell us where the outdoor unit is (roof or wall) and make sure the main power lines are connected and safe.
- 2
Open the villa or flat door
Make sure the team can access the villa or flat interior and all indoor units before arrival.
- 3
Write down any problems you've noticed
Note any odd sounds, smells, poor cooling or water leaks you've noticed before the check, as this helps the team diagnose faster.
More districts for HVAC & refrigeration technician
Other services in Al Samer
FAQ
Questions about HVAC & refrigeration technician
What does the technician bring on the visit?
The technician brings pressure gauges to check the refrigeration cycle, electrical meters to test the capacitor, relay and control board, and leak detection and flare joint tools. The exact kit depends on the fault description you give when you book.
Can the technician check the AC and the fridge in the same visit?
Yes. The technician covers both air conditioning and refrigeration, so if you have a faulty AC and a commercial fridge or cold unit at the same location he inspects both in one visit and explains the condition of each separately before any repair begins.
How does the technician explain the fault before any work begins?
The technician diagnoses the fault first, whether a failing capacitor, a deteriorated flare joint or a blocked drain line, then tells you what he found, what work is needed and which parts must be replaced. No work starts until you have approved what he has explained.
What happens if the repair needs a spare part?
After the inspection the technician names the part needed and explains why. If the part is available on site the repair is done in the same visit. If it has to be sourced first, he agrees a second visit with you. No replacement is started without your knowledge of what will be done.
Is the inspection for a split unit different from a ducted or cassette unit?
Yes. A split unit gives direct access to the coil, filter and flare joint. A ducted or cassette unit also needs the plenum, dampers and duct runs checked to confirm air is distributed correctly. The technician decides the inspection method after seeing the unit type and installation at your site.
Smart and modern AC units are common here, do you service those?
Yes, our team is trained on modern and smart units, and we inspect the electrical boards, sensors and current compressors.
The streets are wide and villas are spaced apart, is it easy to reach outdoor units?
Yes, Al Samer's regular layout makes it easy for our team to reach outdoor units on roofs and walls safely and quickly.
Some new villas here have large compressors, how do you inspect those?
We fully inspect the compressor: checking pressure, electrical current, unusual sounds and any leaks.
If I need modern spare parts, do you stock those?
We identify the needed part during inspection, then bring it on the next visit or coordinate with you before starting the repair.
