Specialist technician on site
HVAC & refrigeration technician in Al Waziriyah
In Al Waziriyah, south Jeddah, an Alrabih technician arrives to diagnose AC and industrial refrigerator faults and display chillers in shops, restaurants and small factories, inspects the system in front of you and clarifies the solution before work begins.
- Accurate diagnosis
- Clear explanation first
- One visit
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When to book a technician visit
- 1
AC that no longer cools properly
The unit runs but the air is barely cool, you hear knocking from the indoor head, or you find water on the wall. The technician brings pressure gauges and electrical test tools and finds the cause before starting any repair.
- 2
A fridge or cold room in your shop
The fridge does not hold temperature, or the compressor runs without cycling off. Stock loss starts before you notice the fault. The technician comes to your shop, checks the circuit and tells you the real condition of the unit.
- 3
A sudden fault with no obvious cause
The AC trips the breaker, runs without cooling, or gives off a smell. These symptoms can have different causes. The technician checks the board, compressor, capacitor and coil in the right order and explains what he finds.
Who it's for
Your AC keeps tripping the breaker and you need answers
The technician visits your home with electrical test tools, checks the board, capacitor and compressor in order, and explains the real cause before starting any repair.
Ask on WhatsAppYour shop fridge is not holding temperature and stock is at risk
The technician comes to your shop, checks the refrigeration cycle, compressor and coil, and tells you the real condition of the unit before you lose refrigerated stock.
Ask on WhatsApp
What the visit covers
- Pressure check with gauges
- Capacitor and electrical test
- Coil and drain inspection
- On-site refrigeration diagnosis
- Fault explained before work
How we work
How we work
- 1
Describe the fault
WhatsApp the unit type and what you are seeing, such as a noise, no cooling or water, and your district, and we arrange the visit.
- 2
On-site inspection
The technician arrives with pressure gauges and electrical test tools, inspects the unit in the correct sequence in front of you and does not start any work until the inspection is complete.
- 3
Explain and agree next step
After the inspection the technician explains the real cause and what the repair needs, then starts work only after you agree on what will be done.
- 4
Repair and run test
The technician carries out the agreed repair and runs the unit in front of you to confirm the fault is cleared and the unit is working properly before he leaves.
A qualified technician or a quick fix?
| Alrabih | The usual way | |
|---|---|---|
| Test tools | Pressure gauges and electrical meters | Guesswork diagnosis |
| Explanation before work | Cause and step agreed first | Starts without telling you |
| Visit scope | AC and fridge in one visit | One unit only |
| Repeat calls | Root cause found | Fault comes back |
| Equipment covered | AC and commercial refrigeration | AC only |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Waziriyah is an industrial and commercial zone with small factories, workshops, storage and shops, and the mixed-use buildings have weaker ventilation in some areas. This industrial environment puts greater stress on electrical and cooling systems because AC units run at higher load and industrial dust accumulates on coils faster. Understanding high-voltage wiring, generators and large-scale fridges requires specialized expertise.
Al Waziriyah is in south Jeddah, an industrial and commercial zone with factories, workshops, storage and diverse shops.
Most Waziriyah factories and workshops rely on heavy ceiling units or central cooling systems, with outdoor units often multiple and connected by heavier cables to handle higher currents.
The AC setup in Al Waziriyah
- 1
Heavy ceiling units for factories
Waziriyah factories and workshops use large ceiling units to cool wide spaces, with thick copper piping and powerful compressors.
- 2
Industrial refrigeration systems with multiple piping
Small factories and large restaurants in Waziriyah rely on multi-unit refrigeration systems with interconnected copper piping networks.
- 3
Multiple outdoor units on roofs
Waziriyah workshops and factories typically mount several outdoor units on the roof, connected by heavy electrical cables to handle high current.
Before the visit
Before our visit in Al Waziriyah
- 1
Tell us the location of outdoor units and connections
When calling, specify the location of outdoor units on roof or external wall, and let us know if there are multiple units linked together.
- 2
Have info on the electrical breaker panel ready
We may need to cut or measure electrical current, so having breaker panel info and location ready speeds up inspection.
- 3
Clear safe space around the units
Ensure there are no materials or equipment around outdoor or indoor units before the visit to ensure safe team access.
More districts for HVAC & refrigeration technician
Other services in Al Waziriyah
FAQ
Questions about HVAC & refrigeration technician
What does the technician bring on the visit?
The technician brings pressure gauges to check the refrigeration cycle, electrical meters to test the capacitor, relay and control board, and leak detection and flare joint tools. The exact kit depends on the fault description you give when you book.
Can the technician check the AC and the fridge in the same visit?
Yes. The technician covers both air conditioning and refrigeration, so if you have a faulty AC and a commercial fridge or cold unit at the same location he inspects both in one visit and explains the condition of each separately before any repair begins.
How does the technician explain the fault before any work begins?
The technician diagnoses the fault first, whether a failing capacitor, a deteriorated flare joint or a blocked drain line, then tells you what he found, what work is needed and which parts must be replaced. No work starts until you have approved what he has explained.
What happens if the repair needs a spare part?
After the inspection the technician names the part needed and explains why. If the part is available on site the repair is done in the same visit. If it has to be sourced first, he agrees a second visit with you. No replacement is started without your knowledge of what will be done.
Is the inspection for a split unit different from a ducted or cassette unit?
Yes. A split unit gives direct access to the coil, filter and flare joint. A ducted or cassette unit also needs the plenum, dampers and duct runs checked to confirm air is distributed correctly. The technician decides the inspection method after seeing the unit type and installation at your site.
The compressor in my factory runs very loudly, does it need replacing?
High noise may indicate internal friction, low refrigerant oil or clogged copper lines. Our team inspects the compressor and lines with measuring tools and determines whether repair or replacement is the right solution.
Do you repair large industrial fridges and commercial display chillers?
Yes, we repair industrial maintenance fridges, display chillers and freezer units in factories, restaurants and hotels, handling heavy compressors, coils, valves and copper piping.
The workshop is very hot, is the AC insufficient?
The AC may not be sized for the workshop's heat load, or the coils are dirty from industrial dust, or electrical connections are weak. Our team calculates the heat load, measures airflow and recommends the right solution.
Do old electrical cables in the factory affect refrigerator performance?
Yes, weak or old cables reduce the current reaching the compressor, weakening cooling. We check voltage and current standards and recommend upgrading connections if needed.
