Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When your window unit needs attention
- 1
Weak cooling even on full power
The room stays warm even with the unit running at full. Most often the coil or filter is blocked with the dust and salt Jeddah's air carries; cleaning them brings the cooling back without any parts.
- 2
Water leaking into the room
Dripping inside the room does not always mean a mechanical fault. The unit needs a slight tilt toward the outside so condensate runs away. We check the tilt, the drain tray and the drain holes before anything else.
- 3
Loud noise or a fan that will not spin
Grinding or heavy vibration usually points to a fan with broken blades, a worn shaft or a foreign object inside the unit. A fan that does not start while the compressor hums is often a failed run capacitor.
Who it's for
Your flat's window unit drips onto the floor
We check the unit tilt, drain tray and drain holes on site and correct the real cause so the dripping does not return.
Ask on WhatsAppYour shop's window unit runs but does not cool
We diagnose the coil, filter, capacitor and thermostat at your shop and carry out the repair needed to restore cooling with the least disruption to your business.
Ask on WhatsApp
What the repair covers
- Filter and coil cleaned
- Capacitor relay and thermostat tested
- Fan blades and shaft checked
- Tilt and drain tray corrected
- Chassis rust report provided
How we work
How we work
- 1
Describe the fault
WhatsApp us what is happening: noise, drip or weak cooling. A photo of the front of the unit helps us know the model before the visit.
- 2
On-site diagnosis
The technician checks the filter, coil, fan, capacitor and thermostat in order, then tells you the real cause and what the repair needs before he starts.
- 3
Repair or replace call
If the repair is practical we complete it in the same visit. If the unit is old, the chassis is deeply rusted or the compressor fault is complex, we say so plainly and explain your options.
- 4
Run test and handover
After the repair we run the unit, check the cooling, confirm the drain flows and watch the current settle, then leave the room clean.
Real diagnosis or a quick guess?
| Alrabih | The usual way | |
|---|---|---|
| First step | Systematic check of each part | Replace the easiest part |
| Rust | Honest chassis assessment | Ignored until it worsens |
| Dripping | Tilt and tray checked first | Refrigerant added without diagnosis |
| Replace decision | Based on actual condition | May be rushed or delayed |
| Refrigerant type | Read from the unit nameplate | Wrong type may be added |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Nuzha is a central mixed-use district with residential flats and commercial blocks, and some residents and shop owners chose window AC for flexibility and ease. Exposure to coastal humidity and dust from the nearby mall and market accelerates build-up on coils and condenser, causing leaks or weak cooling. Our quick diagnosis pinpoints the real issue and saves residents and shop owners from unnecessary replacement, while coordinating visit times around commercial hours.
Al Nuzha is in central Jeddah, a mixed-use zone of residents and traders near the market and mall.
Window units are scattered across flats and shops here, with drainage varied depending on whether the window faces the street or an interior courtyard.
The AC setup in Al Nuzha
- 1
Window units in both flats and commercial shops
Al Nuzha has both residential flats and commercial shops, each with different window types and operating conditions.
- 2
Variable drainage depending on window location
Some units drain directly to the street, others to interior courtyards or shared areas.
- 3
Exposed to coastal humidity and commercial dust
Units here face direct coastal humidity and dust from foot traffic and commercial activity.
Before the visit
Before our visit in Al Nuzha
- 1
Choose the best visit time if it's a commercial shop
If the unit is in a shop, choose a time that does not clash with business hours or customer traffic.
- 2
Confirm safe window access from street or courtyard
Verify the street or courtyard is clear of obstacles and congestion before the visit.
- 3
Tell us where the outlet and switch are in the flat or shop
Point out the outlet and switch location, especially if far from the window or hidden.
More districts for Window AC repair
Other services in Al Nuzha
FAQ
Questions about Window AC repair
Can a window unit be repaired in the same visit?
Many faults, a clogged filter, a dirty coil, a failed run capacitor and a wrong tilt, are fixed in a single visit. If the unit needs a part the technician does not carry, we arrange a second visit once it is sourced.
How does Jeddah's salty air affect a window unit?
The damp salty air from the sea speeds up corrosion on the metal chassis, fan blades and coil fins. Units on sea-facing walls or higher floors corrode faster. We check how deep the rust goes and tell you honestly whether the unit is worth repairing or whether the chassis has reached the point where replacement saves more.
The unit runs but the compressor will not start. What causes that?
The most common cause is a failed run capacitor that can no longer give the compressor or fan the starting push it needs. The relay is the second likely cause. The technician tests both with instruments and confirms which is at fault before replacing anything.
Why does my window unit drip water into the room?
A window unit drains condensate out of the back, so if it tilts inwards or the drain holes in its base block, the water comes back into the room. We reset the tilt slightly outwards, clean the pan and drain holes, and check the frame is sealed so no water runs down the sides.
Can a faulty thermostat cause the compressor to cycle on and off rapidly?
Yes. A faulty thermostat can send wrong signals that make the compressor cut in and out abnormally, straining the circuit and reducing cooling. The technician tests the thermostat with instruments and separates it from other causes such as the relay or a supply voltage issue before any part is replaced.
My shop loses cooling during peak hours, does the unit need replacing?
Often it's clogged coils from dust or a dirty condenser, which deep cleaning without replacement improves immediately.
The street outside is narrow and busy, how do you get repair tools to the window?
Our team carries tools by hand when needed, and we agree on the best parking spot and visit times to avoid disrupting traffic.
Humidity from the sea and nearby market causes mould repeatedly, what helps?
We clean the unit thoroughly to remove mould completely, and recommend weekly ventilation cycles and maintenance every three months to prevent recurrence.
The old outlet in the shop may not handle the unit's load, is repair safe?
We disconnect completely before work and verify the outlet and wiring are safe before restarting.
