Air outlets and grilles installation in Al Furqan, Jeddah

In Al Furqan, north Jeddah, installing air outlets and grilles for modern multi-storey blocks and large villas calls for precise study of each room and duct run. Alrabih's team selects the right diffuser and flexible duct size for each space, ensuring even air distribution and quiet operation.

4.9 on Google
  • Galvanized plenums
  • Flexible duct links
  • Saudi-made grilles

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When your project needs this work

  1. 1

    A duct network awaiting its outlets

    The main duct runs are in place, but the plenum boxes and grilles are not yet fitted. This stage needs its own care: correct sizing for each plenum box and a match between the flexible duct diameter and the grille neck.

  2. 2

    Grilles making noise or staining the ceiling

    A constant air hiss or black marks around a grille point to a problem with the plenum box, the flexible duct link or the outlet angle. In Jeddah's humidity, an unbalanced cold outlet stains the ceiling faster than in a dry climate.

  3. 3

    A new build or an extension

    In new builds and extensions the number and type of air outlets are set at design stage, then the plenum boxes are fabricated from G90 galvanized sheet from SABIC and installed to the approved duct layout.

Who it's for

  • Living in a villa with ductwork in place but no outlets yet

    We survey each branch point, fabricate the plenum boxes and fit the right grilles for each room.

    Ask on WhatsApp
  • Managing a commercial building with noisy grilles

    We inspect the flexible duct links and plenum boxes and correct the cause of the noise and ceiling staining.

    Ask on WhatsApp

What the job covers

What the work covers

  • Fabricating insulated plenum boxes
  • Supplying and fitting flexible ducts
  • Supplying Saudi-made air grilles
  • Fitting dampers inside plenums
  • Setting grilles and airflow
Request a quote

How we work

How we work

  1. 1

    Site survey and outlet sizing

    The technician visits the site, measures each branch point in the duct network, and decides the grille type and flexible duct diameter suited to the room size and ceiling height.

  2. 2

    Plenum box fabrication

    Plenum boxes are made in our workshop from G90 galvanized sheet from SABIC to the dimensions the survey set, with internal glass-wool insulation fitted before they leave for site.

  3. 3

    Installation and network connection

    Each plenum box is fixed to the main duct branch, and the flexible duct of the correct diameter is connected between it and the ceiling grille opening, with the air damper fitted where the layout requires.

  4. 4

    Balance check and handover

    After the system is running, the technician sets the grille vanes and air dampers and checks that cooling is distributed evenly across the space before handover, with a one-year warranty.

Start with step one

Why Alrabih?

A calculated fit or a quick connection?

AlrabihThe usual way
Plenum boxMade to size with internal insulationStandard size, may not fit
Flexible ductDiameter matched to each outletOne diameter throughout
GrilleType and size for the roomWhatever is in stock
Air damperFitted where the layout requiresOmitted or closed off
Internal insulationFitted in workshop before installAdded on site or omitted
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

Al Furqan's relatively newer buildings mix large flats and villas with central systems, each room needing an outlet matched to ceiling height and floor area. The flexible duct between the plenum box and the outlet must match in diameter and length, and the glass-wool insulation around it cuts condensation on suspended ceilings in the humid climate. Coordinating the install with the supervising engineer matters, since each unit may differ from the next.

Al Furqan lies in modern north Jeddah, an area of contemporary residential buildings with central AC systems and suspended ceilings.

Most projects here use wide flat-slot ceiling diffusers, requiring precise sizing of the flexible duct diameter to match the design.

The AC setup in Al Furqan

  1. 1

    Flat-slot diffusers on suspended ceilings

    Most modern flats and villas in Al Furqan use flat-slot diffusers mounted directly on suspended ceilings, requiring flexible ducts in specific diameters.

  2. 2

    Plenum boxes in galvanized sheet

    Plenum boxes are made from G90 galvanized sheet with internal glass-wool insulation, mounted in the void spaces between ceilings and structural frames.

  3. 3

    Flexible ducts in various lengths

    Flexible ducts link the plenum box to the diffuser, with lengths varying by the box and outlet positions in each room.

Before the visit

Before our visit in Al Furqan

  1. 1

    Review the complete design drawings

    Make sure you have the final design drawings showing the plenum box location, diffuser position and flexible duct diameter needed for each room.

  2. 2

    Confirm suspended ceiling location and void depth

    Check the void depth between the structural and suspended ceiling, and the suspended ceiling position in each unit, to set the right flexible duct length.

  3. 3

    Coordinate with the engineer and contractor

    Ensure the site team knows the install date, and that the plenum boxes and diffusers are in place and ready before our visit.

FAQ

Questions about Air outlets and grilles installation

What is the difference between a grille and a diffuser, and which suits my room?

A grille directs air in set directions through adjustable vanes and is common in ceilings and walls. A diffuser spreads air in a wide circle along the ceiling and suits open rooms and commercial spaces. The choice between the two depends on room dimensions, ceiling height and plenum position, all of which the technician decides at the site survey.

Why do black marks appear around a grille after a short time?

The usual cause is warm air leaking through a gap in the flexible duct connection or around the plenum box, which meets the cold surface near the grille and deposits dust. Jeddah's high humidity speeds the process up. The fix is sealing the connection and insulating the plenum box properly, not just cleaning the ceiling.

Do you make the plenum boxes yourselves or buy them ready-made?

We make them in our own workshop from G90 galvanized sheet from SABIC to the dimensions the site survey sets for each branch point. Internal glass-wool insulation is fitted in the workshop before each box goes to site. This lets us match the size precisely rather than adapting a standard box that may not suit the opening.

Can extra air outlets be added to an existing duct network?

Yes, within what the existing network capacity and main duct space allow. The technician checks the duct diameter at the proposed branch point and confirms that pressure is sufficient to feed the new outlet without weakening the existing ones. Competitive prices apply, with discounts by quantity and project size.

Does the flexible duct link affect the noise level inside the room?

Yes. A flexible duct link narrower than required speeds the air up and produces an audible whistle. One that is too long or bent at a sharp angle creates turbulent airflow. The technician decides the correct diameter and duct path at the site survey, based on the distance between the plenum box and the grille opening and the room size.

Our flat is large, how do we choose the right outlet size?

The outlet size depends on the room area, ceiling height and the design drawings. We review the drawings first before ordering or installing.

What diameter should the flexible duct link have?

The diameter is set by the air volume needed for each room and the link distance. We confirm the size with the engineer before buying.

High humidity causes condensation on the suspended ceiling, how do we stop it?

We wrap the flexible duct and diffuser with glass-wool insulation to prevent condensation in the humid climate, and keep the outlet vents clear for proper drainage.

Does the plenum box design affect the outlet and duct choice?

Yes, the plenum box design in galvanized sheet sets the flexible duct diameter and outlet location. We review the full project before buying and installing.

The Jeddah corniche in cool weather

Finish your network with the right outlets

Send your duct layout or a site photo on WhatsApp and we will book a survey in your district, Saturday to Thursday, eight in the morning to eight in the evening.

CallWhatsApp