Central AC for apartments
Apartment central AC in Al Manar
In Al Manar east of Jeddah, modern residential flats increasingly request central AC to evenly distribute air across spacious layouts. Alrabih's team carefully selects positions and routes to adapt to contemporary construction and tight ceilings in some units.
- Tight ceiling
- Sealed drain
- Quiet running
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When central AC makes sense in your flat
- 1
New flat before finishing
The finishing stage is the right time to install central AC. The ceiling is open and walls are ready for copper and drain routes, so there is no need later to cut plaster or damage finished surfaces.
- 2
Occupied flat where splits fall short
If splits leave hot and cold patches, or the noise bothers you at night, central AC distributes air evenly and hides the unit away from the room. A site survey decides whether your ceiling height allows it.
- 3
Your unit disturbs the neighbours
In apartments, neighbours hear unit vibration through shared ceilings and walls. We choose the indoor unit suspension point carefully and use flexible collars on the air outlets to absorb vibration before it reaches the building structure.
Who it's for
Living in a furnished flat and want to replace splits
We survey your ceiling void to see whether a concealed unit fits, then run copper and drain without disturbing the existing décor.
Ask on WhatsAppBuying a flat in a building under construction
We coordinate with the finishing stage to run copper, drain and ducts before ceilings and walls are closed, so every route stays fully concealed.
Ask on WhatsApp
What the installation covers
- Ceiling survey and unit position
- Mueller copper fully insulated
- Condensate drain with correct fall
- Air ducts and distributed outlets
- Line vacuum and start-up test
How we work
How we work
- 1
Ceiling and route survey
We measure the available ceiling void, decide where the indoor unit hangs, map the copper route and find where condensate drains without causing damp. The survey decides whether one zone or more suits the flat.
- 2
Run copper and drain
We run insulated Mueller copper in the void above the suspended ceiling and slope the condensate line towards the building drain or an external outlet, so no standing water causes odour or damp.
- 3
Fit ducts and outlets
We mount the indoor unit on vibration-absorbing hangers, route ducts to each room and place every outlet so air spreads evenly without blowing cold air directly onto anyone.
- 4
Vacuum, test and hand over
We vacuum the copper line to remove air and moisture, check all joints, then run the unit and confirm cooling in every room before we hand over.
A considered install or a hasty one?
| Alrabih | The usual way | |
|---|---|---|
| Indoor unit position | Set after measuring the void | Wherever it fits |
| Condensate drain | Calculated fall to building drain | May pool and cause damp |
| Vibration | Absorbing hangers, flexible collars | Reaches the neighbours |
| Air distribution | Outlets placed for even spread | Cold rooms and warm rooms |
| Salty sea air | Mueller copper, tight flared joints | Early joint corrosion |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Manar is a relatively modern eastern district hosting residential buildings of varied design, with flats ranging from small to spacious units. Some older buildings in the area were not originally designed for central AC, whilst newer structures offer more stable suspended ceiling space. Each installation requires careful assessment before starting. The district sits slightly inland from the coast, making humidity more manageable than coastal zones.
Al Manar sits east of Jeddah, with modern residential buildings of varied design ranging from compact to spacious flats.
Al Manar flats need individual assessment, with some suited to a single ceiling unit and simple ducts, whilst others may require a dual system or custom distribution strategy.
The AC setup in Al Manar
- 1
Ceiling unit with simple or dual ducts
Depending on flat size and suspended ceiling, we use a single unit with simple ducts or a dual system if the space needs separate air distribution.
- 2
Safe condensate drainage to bathroom or rear balcony
We run the drain line from the ceiling to a bathroom or rear balcony safely to avoid dampness on adjacent walls or furniture.
- 3
Outdoor unit on roof or distant balcony
The outdoor unit sits on the roof or the furthest available rear balcony, away from main windows and shared walls with neighbours.
Before the visit
Before our visit in Al Manar
- 1
Confirm building management and neighbours' approval
Obtain written approval from building management and inform adjacent neighbours of the plan to avoid later objections to the outdoor unit.
- 2
Inspect the suspended ceiling and existing beams
Access the suspended ceiling and inspect for any concrete beams, cables or pipes that might obstruct the indoor unit position.
- 3
Locate nearby drainage and water lines
Check for nearby drainage pipes or sewage lines in the ceiling so we can choose the best route for the condensate drain.
More districts for Apartment central AC
Other services in Al Manar
FAQ
Questions about Apartment central AC
Is there enough ceiling space in a flat for a central unit?
It varies between flats. Slim ceiling cassettes need less void depth than full ducted units. A site survey measures what is available and decides the right type; if the corridor ceiling is too shallow we look at a storage room or bathroom ceiling instead.
Is one unit enough for the whole flat or do I need more?
It depends on the flat's area, room layout and how much sun each side receives. Two- and three-bedroom flats can sometimes work with one unit and well-planned ducts; larger flats or those with separate zones may need two. The survey decides.
Where does the outdoor unit go when the flat has no large balcony?
Options include the shared roof if the building rules allow it, a facade bracket away from neighbours' windows, or the balcony if it can take the load. We review the building's rules before recommending any position.
Jeddah's air is very humid; does that affect the condensate drain?
Yes. In Jeddah the indoor unit produces more condensate because of the high humidity. We make sure the drain line has enough fall, that the horizontal run before it drops is not too long, and that the outlet does not conflict with other flats' drainage in the building.
Can the flat be split into two zones with different temperatures?
It is possible using two separate indoor units or by adding variable-flow dampers on the duct runs. The right choice depends on the flat's layout and the ceiling void available in each zone. A site survey decides which approach suits your room arrangement.
Our building is relatively older in Al Manar, is central AC installation possible?
Yes, it is always possible. We inspect the ceiling and available space and design a system suited to the older building, using a single unit or custom approach depending on circumstances.
How do you route the lines and cables through a crowded building?
We study the building's interior and exterior plans and choose concealed routes around rear and side walls, coordinating with management for safe passage across shared roofs and corridors.
Al Manar has humidity, does it affect central AC efficiency?
Al Manar is less exposed to humidity than coastal zones, but we carefully position the condensate drain and fit a high-efficiency filter to maintain performance and manage condensation.
The outdoor unit will be visible on the building façade, can you hide it?
We choose the most visually discrete location on the roof or rear balcony to minimise visual impact, and will use a rear corner away from the front façade if available.
