Central AC for apartments

Apartment central AC in Al Qurayyat

In Al Qurayyat south Jeddah, newer flats in wider buildings make central AC installation easier, but intense heat, dust, and coastal humidity demand high standards in design and maintenance. Alrabih selects the optimal location and routing to ensure long-term performance.

Call nowWhatsApp
  • Tight ceiling
  • Sealed drain
  • Quiet running

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia — Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox — Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

When central AC makes sense in your flat

  1. 1

    New flat before finishing

    The finishing stage is the right time to install central AC. The ceiling is open and walls are ready for copper and drain routes, so there is no need later to cut plaster or damage finished surfaces.

  2. 2

    Occupied flat where splits fall short

    If splits leave hot and cold patches, or the noise bothers you at night, central AC distributes air evenly and hides the unit away from the room. A site survey decides whether your ceiling height allows it.

  3. 3

    Your unit disturbs the neighbours

    In apartments, neighbours hear unit vibration through shared ceilings and walls. We choose the indoor unit suspension point carefully and use flexible collars on the air outlets to absorb vibration before it reaches the building structure.

Who it's for

  • Living in a furnished flat and want to replace splits

    We survey your ceiling void to see whether a concealed unit fits, then run copper and drain without disturbing the existing décor.

    Ask on WhatsApp

  • Buying a flat in a building under construction

    We coordinate with the finishing stage to run copper, drain and ducts before ceilings and walls are closed, so every route stays fully concealed.

    Ask on WhatsApp

What the installation covers

  • Ceiling survey and unit position
  • Mueller copper fully insulated
  • Condensate drain with correct fall
  • Air ducts and distributed outlets
  • Line vacuum and start-up test
Request a quote

How we work

How we work

  1. 1

    Ceiling and route survey

    We measure the available ceiling void, decide where the indoor unit hangs, map the copper route and find where condensate drains without causing damp. The survey decides whether one zone or more suits the flat.

  2. 2

    Run copper and drain

    We run insulated Mueller copper in the void above the suspended ceiling and slope the condensate line towards the building drain or an external outlet, so no standing water causes odour or damp.

  3. 3

    Fit ducts and outlets

    We mount the indoor unit on vibration-absorbing hangers, route ducts to each room and place every outlet so air spreads evenly without blowing cold air directly onto anyone.

  4. 4

    Vacuum, test and hand over

    We vacuum the copper line to remove air and moisture, check all joints, then run the unit and confirm cooling in every room before we hand over.

A considered install or a hasty one?

AlrabihThe usual way
Indoor unit positionSet after measuring the voidWherever it fits
Condensate drainCalculated fall to building drainMay pool and cause damp
VibrationAbsorbing hangers, flexible collarsReaches the neighbours
Air distributionOutlets placed for even spreadCold rooms and warm rooms
Salty sea airMueller copper, tight flared jointsEarly joint corrosion

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Similar project? Send us the details

Customer reviews

What our customers say

4.8

From 10 Google reviews

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

Al Qurayyat has newer, wider residential buildings with relatively higher ceilings and less constrained passages, allowing greater flexibility in central AC design. However, intense summer heat, fine dust, and coastal humidity increase operating load and demand high standards in unit selection, ducts, and drainage to prevent rust and early failure.

Al Qurayyat lies south of Jeddah, a district of newer residential flats in wider, less constrained buildings than central areas.

Most Al Qurayyat flats have ceilings between 2.8 and 3.2 metres, and fine dust and salt spray from the sea require high-quality filters and regular maintenance.

The AC setup in Al Qurayyat

  1. 1

    Indoor unit in ceiling with high-grade filtration

    We install the indoor unit in the false ceiling with premium filters to protect the system from dust and salt.

  2. 2

    Insulated, corrosion-resistant copper piping

    We run high-grade insulated copper pipes rated for coastal humidity and intense heat exposure.

  3. 3

    Outdoor unit on protected balcony

    The outdoor unit is mounted on a balcony protected from wind and dust as much as possible to extend its lifespan.

Before the visit

Before our visit in Al Qurayyat

  1. 1

    Confirm electrical circuit strength

    Check that the electrical circuit can handle the unit's load, or plan to have a new separate circuit installed.

  2. 2

    Survey the pipe and drainage routes

    Map the best route for copper pipes and drainage to keep them protected from moisture and extreme heat as much as possible.

  3. 3

    Choose the outdoor unit location carefully

    Select a balcony or location sheltered from coastal wind and dust as much as possible, and tell us so we can mount it securely.

More districts for Apartment central AC

Other services in Al Qurayyat

FAQ

Questions about Apartment central AC

Is there enough ceiling space in a flat for a central unit?

It varies between flats. Slim ceiling cassettes need less void depth than full ducted units. A site survey measures what is available and decides the right type; if the corridor ceiling is too shallow we look at a storage room or bathroom ceiling instead.

Is one unit enough for the whole flat or do I need more?

It depends on the flat's area, room layout and how much sun each side receives. Two- and three-bedroom flats can sometimes work with one unit and well-planned ducts; larger flats or those with separate zones may need two. The survey decides.

Where does the outdoor unit go when the flat has no large balcony?

Options include the shared roof if the building rules allow it, a facade bracket away from neighbours' windows, or the balcony if it can take the load. We review the building's rules before recommending any position.

Jeddah's air is very humid; does that affect the condensate drain?

Yes. In Jeddah the indoor unit produces more condensate because of the high humidity. We make sure the drain line has enough fall, that the horizontal run before it drops is not too long, and that the outlet does not conflict with other flats' drainage in the building.

Can the flat be split into two zones with different temperatures?

It is possible using two separate indoor units or by adding variable-flow dampers on the duct runs. The right choice depends on the flat's layout and the ceiling void available in each zone. A site survey decides which approach suits your room arrangement.

Summer heat is intense, will central AC handle it?

We select a unit with cooling capacity rated for intense summer heat, and ensure copper pipes are properly installed and well-insulated to minimise cooling loss.

Fine dust and salt spray enter the flat, does this affect the AC?

We fit high-quality filters in the indoor unit and recommend monthly filter cleaning during dust season to protect the system.

Coastal humidity is high, does this cause pipe corrosion?

We use high-grade corrosion-resistant copper pipes with good insulation to prevent water pooling on metal surfaces.

Does the flat need a separate, strong electrical circuit?

Yes, we check the available capacity and recommend a separate circuit of at least 3 amps if the existing supply is weak.

The Jeddah corniche in cool weather

Start with a ceiling survey

WhatsApp us photos of your flat or call us to book a survey in your district, Saturday to Thursday, eight to eight.

Call nowWhatsApp
CallWhatsApp