Central AC for apartments
Apartment central AC in Al Rawdah
In Al Rawdah, west Jeddah, flats in closely built modern blocks need central AC that balances efficiency with quiet operation and does not disturb neighbours. Alrabih designs the air ducts carefully to prevent noise and vibration that travel easily between units.
- Tight ceiling
- Sealed drain
- Quiet running
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When central AC makes sense in your flat
- 1
New flat before finishing
The finishing stage is the right time to install central AC. The ceiling is open and walls are ready for copper and drain routes, so there is no need later to cut plaster or damage finished surfaces.
- 2
Occupied flat where splits fall short
If splits leave hot and cold patches, or the noise bothers you at night, central AC distributes air evenly and hides the unit away from the room. A site survey decides whether your ceiling height allows it.
- 3
Your unit disturbs the neighbours
In apartments, neighbours hear unit vibration through shared ceilings and walls. We choose the indoor unit suspension point carefully and use flexible collars on the air outlets to absorb vibration before it reaches the building structure.
Who it's for
Living in a furnished flat and want to replace splits
We survey your ceiling void to see whether a concealed unit fits, then run copper and drain without disturbing the existing décor.
Ask on WhatsAppBuying a flat in a building under construction
We coordinate with the finishing stage to run copper, drain and ducts before ceilings and walls are closed, so every route stays fully concealed.
Ask on WhatsApp
What the installation covers
- Ceiling survey and unit position
- Mueller copper fully insulated
- Condensate drain with correct fall
- Air ducts and distributed outlets
- Line vacuum and start-up test
How we work
How we work
- 1
Ceiling and route survey
We measure the available ceiling void, decide where the indoor unit hangs, map the copper route and find where condensate drains without causing damp. The survey decides whether one zone or more suits the flat.
- 2
Run copper and drain
We run insulated Mueller copper in the void above the suspended ceiling and slope the condensate line towards the building drain or an external outlet, so no standing water causes odour or damp.
- 3
Fit ducts and outlets
We mount the indoor unit on vibration-absorbing hangers, route ducts to each room and place every outlet so air spreads evenly without blowing cold air directly onto anyone.
- 4
Vacuum, test and hand over
We vacuum the copper line to remove air and moisture, check all joints, then run the unit and confirm cooling in every room before we hand over.
A considered install or a hasty one?
| Alrabih | The usual way | |
|---|---|---|
| Indoor unit position | Set after measuring the void | Wherever it fits |
| Condensate drain | Calculated fall to building drain | May pool and cause damp |
| Vibration | Absorbing hangers, flexible collars | Reaches the neighbours |
| Air distribution | Outlets placed for even spread | Cold rooms and warm rooms |
| Salty sea air | Mueller copper, tight flared joints | Early joint corrosion |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Rawdah is a new residential district built at high density, with very closely spaced blocks and relatively thin party walls. The gaps between buildings are narrow, making careful placement of the outdoor unit critical and noise prevention essential. Humidity in west Jeddah is moderate but summer heat is intense, and natural ventilation is limited by the closely packed buildings. Central AC must deliver strong performance without causing vibrations or low-frequency sounds that travel through shared ceilings and walls.
Al Rawdah lies in west Jeddah, a district of modern apartment blocks built at very high density with thin party walls.
Most new Al Rawdah flats have suspended ceilings with tight voids, and most need a booster fan to ensure cool air reaches all rooms evenly.
The AC setup in Al Rawdah
- 1
Indoor unit in corridor with thick sound insulation
We place the indoor unit in the corridor away from party walls, mounted on a flexible bracket with thick sound insulation.
- 2
Sound-insulated ducts with optional booster fan
We use thick sound-insulated ducts, and may add a booster fan in larger flats to ensure even distribution without noise.
- 3
Sound-dampening panels behind outdoor unit
We install sound-dampening panels behind the outdoor unit to reduce vibration and noise transfer to adjacent flats and balconies.
Before the visit
Before our visit in Al Rawdah
- 1
Check balcony and side walls are safe
Check that the balcony and side walls are in good condition and can bear the outdoor unit's weight before the visit.
- 2
Plan outdoor unit placement to avoid disturbing neighbours
Tell us where neighbouring balconies and windows are, so we can choose an outdoor unit location that does not cause noise disturbance to neighbours.
- 3
Coordinate with management and neighbours
Inform the management and neighbours of the installation date, as work may involve accessing shared walls or areas close to adjacent flats.
More districts for Apartment central AC
Other services in Al Rawdah
FAQ
Questions about Apartment central AC
Is there enough ceiling space in a flat for a central unit?
It varies between flats. Slim ceiling cassettes need less void depth than full ducted units. A site survey measures what is available and decides the right type; if the corridor ceiling is too shallow we look at a storage room or bathroom ceiling instead.
Is one unit enough for the whole flat or do I need more?
It depends on the flat's area, room layout and how much sun each side receives. Two- and three-bedroom flats can sometimes work with one unit and well-planned ducts; larger flats or those with separate zones may need two. The survey decides.
Where does the outdoor unit go when the flat has no large balcony?
Options include the shared roof if the building rules allow it, a facade bracket away from neighbours' windows, or the balcony if it can take the load. We review the building's rules before recommending any position.
Jeddah's air is very humid; does that affect the condensate drain?
Yes. In Jeddah the indoor unit produces more condensate because of the high humidity. We make sure the drain line has enough fall, that the horizontal run before it drops is not too long, and that the outlet does not conflict with other flats' drainage in the building.
Can the flat be split into two zones with different temperatures?
It is possible using two separate indoor units or by adding variable-flow dampers on the duct runs. The right choice depends on the flat's layout and the ceiling void available in each zone. A site survey decides which approach suits your room arrangement.
My flat is in the middle of the building; how do you avoid noise with neighbours?
We select sound-insulated ducts and mount the indoor unit on a flexible bracket that reduces vibration. We also recommend sound-dampening panels behind the outdoor unit to minimise noise transfer to adjacent flats.
The gaps between buildings are very tight; are there problems installing the outdoor unit?
Space may be tight, but we often find a suitable spot on the balcony or side wall. We visit first to assess the options and ensure the outdoor unit does not affect neighbouring flats.
Summer heat here is intense; will the AC be adequate?
We select a unit of adequate capacity based on flat size. We may add a booster fan if the flat is very large, and install a shade over the outdoor unit to improve cooling efficiency.
Electrical wiring from the flat to the balcony may need extension; is that safe?
We use approved electrical cable of adequate gauge and secure it safely along walls. We recommend a voltage stabiliser near the outdoor unit to protect the compressor and motor from fluctuations.
