Central AC installation in Prince Fawaz North

We calculate the thermal load for each zone based on its area, ceiling height, number of external openings, orientation and how it will be used. In Jeddah the sun's effect on west-facing facades is significant, and high humidity goes into the calculation. We choose the unit size after this calculation, not before.

We fabricate round and rectangular ducts in our own workshop from G90 galvanised sheet or aluminium sheet depending on what the project needs. This lets us cut ducts to the exact site dimensions and fit them tightly, avoiding ill-fitting sections that leak air and raise electricity consumption.

We use Mueller copper in runs of up to 30 metres without welded joints, which reduces potential leak points. If a run exceeds that, the survey determines whether the outdoor unit position needs rethinking or whether the refrigerant charge needs adjustment according to the type shown on the unit's nameplate.

Yes, and it is settled at the design stage. Each floor can have its own unit, or the network can be split into zones with dampers and a thermostat in each, so you do not cool the whole upper floor while the family sits in the majlis. We recommend the right option after the load calculation.

Yes, and the roof surface determines what kind of base is needed. For villas we fabricate a raised steel frame that keeps the unit clear of pooled rainwater and allows airflow beneath it. The exact height and angle depend on the roof pitch and the condensate drain position, which the site survey establishes. The aim is to keep the unit level and to prevent vibration movement during operation.

Yes, open spaces let air move freely but can increase temperature variance between distant areas. We use air balancers on distribution branches and open passages to allow balanced natural flow.

High ceilings provide more space for ducts, but duct size depends on the volume of air needed, not ceiling height alone. We size the section based on the heat load and required air velocity.

Yes, distance from neighbouring villas and surrounding walls affect the outdoor unit's ventilation. We choose a location with adequate airflow and advise against crowding the unit too closely.

Yes, most ducts can be hidden in walls and suspended ceilings according to the architectural design, but we need adequate wall space and must not obstruct other utilities.