New cold room build
Cold room installation in Al Rabee
In Al Rabee, north Jeddah, cold room installation serves small restaurants, bakeries and food shops needing dependable chilled storage. We choose the room size based on your stock volume and the local climate, delivering a room that maintains steady temperature daily.
- Insulated panels
- Sealed door
- Stable control
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Who needs a new cold room?
- 1
Restaurant or bakery expanding its store
Your current storage cannot hold the quantities you need, or you are relying on domestic fridges that are not up to the job. A purpose-built cold room keeps ingredients at a steady temperature and cuts waste caused by temperature swings.
- 2
Pharmacy or clinic needing medical storage
Medicines, vaccines and sensitive medical supplies need a temperature that does not shift when the door opens or when Jeddah's summer heat peaks. We build the room to suit that use and choose the condensing unit after the site survey.
- 3
Warehouse or grocery starting from scratch
You are fitting out your premises and want a cold room built in from the start, or you want to convert part of a warehouse into one. The site, the daily stock volume and how often the door opens all shape the right specification, and we work that out with you at the survey.
Who it's for
Opening a bakery and need ingredient storage
We survey your allocated space and build a cold room sized to your daily production volume, from insulated panels to the temperature controller.
Ask on WhatsAppYour clinic needs a room for medicines and vaccines
We build a cold room to the specification that medical and pharmaceutical stock requires, and select the condensing unit after a site survey to confirm temperature stays steady.
Ask on WhatsApp
What the installation covers
- Site survey and sizing
- Insulated wall and ceiling panels
- Sealed cold room door
- Condensing unit and evaporator
- Temperature controller and wiring
How we work
How we work
- 1
Site survey
The technician visits, measures the available space and asks about your stock type, quantities and daily use to set the room dimensions and the capacity the unit needs.
- 2
Panels and door
We fit the insulated wall and ceiling panels and seal every joint, then hang the cold room door in its frame and check that the seal presses evenly on all four sides.
- 3
Cooling unit and pipework
We mount the condensing unit where it has enough air, fit the evaporator inside the room, and run Mueller copper in runs of up to 30 metres without welded joints, fully insulated to reduce heat gain.
- 4
Vacuum, start-up, handover
We vacuum the copper line and test joints before starting the unit, then set the temperature controller and confirm the room reaches the target temperature before handing over.
A careful build or a hasty one?
| Alrabih | The usual way | |
|---|---|---|
| Room sizing | Based on stock and use | A rough guess |
| Insulated panels | Every joint sealed | Gaps that lose cold |
| Door seal | Even pressure all round | Condensation and air leaks |
| Copper line | Mueller insulated, vacuumed | No vacuum or poor insulation |
| Evaporator siting | Positioned for even airflow | Fitted without airflow study |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Rabee is a relatively modern district with adjoining small shops in solid buildings with level floors. Shops here vary: bakeries, dairies, juice bars and restaurants, each needing a differently sized room based on daily activity. Installation here benefits from easy access and strong structures that hold insulated panels very stably. Good thermal insulation is vital because summer sun on outer walls can be intense.
Al Rabee is in north Jeddah, a modern district of varied small shops and commercial activities.
Cold rooms here are usually small to medium, 4 to 8 square metres, with condensing units mostly on building roofs or side walls.
The AC setup in Al Rabee
- 1
Small room for a bakery or juice shop
Most rooms here are 4 to 6 square metres, perfect for flour, butter, chilled dough and fresh drinks.
- 2
Outdoor unit on roof or side wall
Roofs and side walls provide safe, customer-free placement for the unit with enough room for proper ventilation.
- 3
Single insulated door with strong seal
The door must close tightly and maintain thermal insulation, especially against the high outside heat.
Before the visit
Before our visit in Al Rabee
- 1
Measure the space and send photos from multiple angles
Precise measurements and clear photos from different angles help us visualise the site and calculate exact room and unit sizing.
- 2
Ensure the roof is safe to work on
Check that the roof can bear the weight of our team, tools and the outdoor unit, and tell us about any constraints or hazards.
- 3
Schedule the installation when it suits your business
Pick a time with fewer customers or when you are closed so the work disrupts your business minimally and our team works more easily.
More districts for Cold room installation
Other services in Al Rabee
FAQ
Questions about Cold room installation
How is the right cold room size worked out?
Size depends on the type and quantity of stock, how often fresh goods come in and how many times the door opens each day. These factors together set the dimensions and the cooling unit capacity needed, which is why we do not suggest a size before the site visit.
Where does the condensing unit go in a restaurant or warehouse?
The condensing unit needs enough air around it, distance from heat sources and a spot a technician can reach for servicing. We decide the best location at the site survey based on the building layout and how the space is used.
What happens to my stock if the power to the room cuts out?
A well-insulated room with a tight door holds its cold for a limited time if the door stays shut, and longer the thicker the insulation and the better the seal. So we choose the panel thickness and the door seal with care, and set the controller to raise an alarm when the temperature rises, so you can act before stock spoils.
What is the difference between this room and a freezer room?
A chiller room works above freezing and suits vegetables, medicines, dairy and baked goods. A freezer room works below freezing and needs thicker insulation, an insulated floor, a heated door frame and a defrost system. If you need freezing or a combined room, we offer that as a dedicated service.
Can a cold room be installed in a rented space without major structural changes?
In most cases yes. Insulated panels are assembled inside the existing space without demolition or construction work, and the condensing unit is fixed in a suitable spot the technician identifies at the survey. Ceiling type and building ventilation may affect the details, and we confirm those after seeing the site.
Will the room handle Al Rabee's intense summer temperature swings?
Yes, properly thick insulated panels and a unit sized to your stock load maintain stable temperature even on the hottest summer days. Regular maintenance of the evaporator and condenser keeps this performance steady.
Can you hide the copper lines discreetly in my tight shop layout?
We route the copper lines as neatly as possible, either along side walls or behind fixtures where feasible, whilst keeping them accessible for maintenance.
Is the unit's electrical demand heavy for a small shop?
Electrical need depends on room and unit size. We inspect your shop's panel and tell you clearly whether you need an extra circuit or if your current wiring is adequate.
After installation, is maintaining the room simple or complex?
Maintenance is fairly simple: clean the evaporator and condenser every two months, check filter cleanliness and door seals. We show you how to monitor these basics and recommend annual professional servicing from our team.
