Copper piping works in Al Shurooq, Jeddah
In Al Shurooq, east Jeddah, copper piping for central AC systems serves the newer buildings and spacious residential compounds. Alrabih's team lays the pipe in the diameters you need, insulates it properly against heat loss, and tests it under pressure and vacuum before any refrigerant is charged.
4.9 on Google- Full insulation
- Dual test
- Secure supports
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When you need a professional copper run
- 1
A new project or system expansion
A new central or split system needs a copper run sized to match the unit's capacity and the distance between the two sides. A run that is laid wrong from the start weakens performance and strains the compressor over time.
- 2
A long distance between the units
In commercial and industrial buildings the run can cross ceilings, walls and service voids. We supply copper runs of up to 30 metres without welded joints, and the site survey determines the route and the number of joints needed.
- 3
An old line with a recurring leak
If inspection shows the existing pipe is corroded or its joints cannot hold pressure again, a full re-run is safer than repeated patching. Jeddah's salty, humid air accelerates corrosion in copper that is not properly insulated.
Who it's for
Installing a new split system in your villa
We lay the copper in the right diameter for each unit, insulate it immediately and run a pressure and vacuum test before charging.
Ask on WhatsAppRunning a commercial building on a central system
We run copper lines through ceilings and service voids, with control wiring, drain pipe and full pressure and vacuum tests.
Ask on WhatsApp
What the job covers
What the work covers
- Copper pipe in required diameter
- Armaflex or Kimmco insulation
- Supports, bends and sleeves
- Control and power wiring
- Pressure test and vacuum
How we work
How we work
- 1
Route survey
We visit the site, agree the route from the indoor to the outdoor unit with you, confirm the pipe diameter and mark every fixing point and obstacle along the way.
- 2
Lay, insulate and support
We lay the pipes along the agreed route, insulate them immediately to prevent moisture and condensation, and fix them to supports spaced to stop any sagging.
- 3
Wires and drain pipe
We run the control and power wires alongside the copper in a tidy arrangement that makes future servicing straightforward, and we fit the condensate drain pipe with a fall that carries water clear of the indoor unit.
- 4
Pressure test and vacuum
We pressurise the line to find any joint leak before charging, then vacuum it to remove air and moisture with a vacuum pump. Once the reading holds, the line is ready for refrigerant, with a one-year warranty.
Why Alrabih?
A thorough run or a quick one?
| Alrabih | The usual way | |
|---|---|---|
| Insulation | Full, fitted immediately | Partial or left for later |
| Supports | Evenly spaced | Too few or missing |
| Pressure test | Always before charging | Sometimes skipped |
| Vacuum | Pump with reading held | Neglected in many cases |
| Control wiring | Laid with the copper, tidy | Left to a later stage |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Shurooq's eastern districts are built with modern structures and spacious residential compounds with open outdoor areas, allowing long copper runs from the outdoor unit to the indoor units without major architectural obstacles. The humid coastal air requires tight heat insulation to prevent condensation forming on the cold pipes, and secure mounting on strong supports keeps the long runs intact under load.
Al Shurooq lies in east Jeddah, a district of modern, spacious buildings with green areas and advanced residential compounds.
Most compounds and modern buildings here are fitted with central AC systems that call for copper runs in various diameters according to the compressor capacity and thermal load.
The AC setup in Al Shurooq
- 1
Run from outdoor unit to multiple indoor units
The copper runs in compounds branch from a main outdoor unit to several indoor units across different flats and areas.
- 2
Protection sleeves at wall and roof crossing points
Where copper crosses building walls or passes through external roofs, we fit protection sleeves to shield the pipe from mechanical damage and direct exposure to the elements.
- 3
Calibrated metal supports for secure fixing
We fit calibrated metal supports to fix the run to walls and columns, allowing for thermal expansion and vibration movement.
Before the visit
Before our visit in Al Shurooq
- 1
Confirm outdoor and indoor unit locations
Tell us exactly where the outdoor unit will sit and where each indoor unit goes, so we can calculate the run length and diameters needed.
- 2
Provide access along the pipe route
Make sure the route from the outdoor to indoor units is accessible for work, especially at wall and roof crossing points and high areas.
- 3
Have the building plan or engineering drawing ready
Providing the building plan helps us identify the best route for the run and avoid existing wiring and pipes.
More districts for Copper piping works
Other services in Al Shurooq
FAQ
Questions about Copper piping works
How does pipe diameter differ between a split and a central system?
The diameter depends on the system's capacity and the distance between the units, not on the system type alone. A central system serving a whole building needs larger diameters than a split for a single room. The survey and the unit datasheet set the right size; the wrong choice weakens performance or raises electricity consumption.
Why is the pipe insulated right after laying and not at the end of the job?
In Jeddah's humid air, condensation forms on the cold pipe surface as soon as the system runs. If the copper is left bare during installation, moisture gets between the pipe and the insulation and reduces its performance. Insulating immediately prevents this and protects the copper surface from early oxidation.
Can you run the copper inside finished walls or ceilings?
Yes, in suspended ceilings or service voids where access allows. Inside a finished concrete wall access is limited and may need extra building work. The survey identifies the practical route, and where concealment is not possible we use protective sleeves on the surface.
Why does the condensate drain matter in a copper piping job?
The indoor unit produces steady condensate, especially in Jeddah where humidity is high. Without enough fall in the drain pipe, or if it is routed in a way that blocks flow, water backs up in the tray and spills onto the ceiling or wall. We run it with a proper fall and separately from the other pipes.
How does Jeddah's humidity affect the insulation on copper pipe?
Jeddah's high humidity degrades pipe insulation quickly when the material is not vapour-resistant or when joints are left unsealed. We use Armaflex or Kimmco materials suited to a coastal climate and seal every joint carefully so that moisture cannot reach the cold copper surface and start early corrosion.
Modern residential compounds in Al Shurooq need long copper runs; how do you test them?
We test every copper run with a pressure and vacuum tester before refrigerant charging, to confirm there are no leaks and the system is ready for safe operation. We offer competitive prices with discounts by quantity and project size.
Outdoor units in distant compounds may need very long pipes; what is the maximum?
We supply copper runs of up to 30 metres without welded joints, with the exact length determined by where your outdoor and indoor units sit. Send us the details over WhatsApp so we can confirm the measurements.
Does the coastal humidity in Al Shurooq affect the copper pipe insulation?
Yes, the humid salty air calls for specialized heat insulation like Armaflex or Kimmco that withstands moisture and salt and prevents mould forming on the pipes.
How do you secure the pipes to walls and ceilings in modern buildings?
We use strong supports spaced evenly to secure the run, and protection sleeves where the copper crosses a wall or sits exposed, with the control wires and drain line alongside.


























































































