Copper piping works in Taif, Makkah Region
Copper piping in Taif serves villas, summer homes and hotels on mountain slopes. We fabricate duct in our Jeddah workshop, supply it to your site in Taif, and install it accounting for water drainage and cool air flows.
4.9 on Google- Full insulation
- Dual test
- Secure supports
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When you need a professional copper run
- 1
A new project or system expansion
A new central or split system needs a copper run sized to match the unit's capacity and the distance between the two sides. A run that is laid wrong from the start weakens performance and strains the compressor over time.
- 2
A long distance between the units
In commercial and industrial buildings the run can cross ceilings, walls and service voids. We supply copper runs of up to 30 metres without welded joints, and the site survey determines the route and the number of joints needed.
- 3
An old line with a recurring leak
If inspection shows the existing pipe is corroded or its joints cannot hold pressure again, a full re-run is safer than repeated patching. The building's conditions and its city's climate both affect how quickly uninsulated copper corrodes, and this is assessed during the site survey.
Who it's for
Installing a new split system in your villa
We lay the copper in the right diameter for each unit, insulate it immediately and run a pressure and vacuum test before charging.
Ask on WhatsAppRunning a commercial building on a central system
We run copper lines through ceilings and service voids, with control wiring, drain pipe and full pressure and vacuum tests.
Ask on WhatsApp
What the job covers
What the work covers
- Copper pipe in required diameter
- Armaflex or Kimmco insulation
- Supports, bends and sleeves
- Control and power wiring
- Pressure test and vacuum
How we work
How we work
- 1
Route survey
We visit the site, agree the route from the indoor to the outdoor unit with you, confirm the pipe diameter and mark every fixing point and obstacle along the way.
- 2
Lay, insulate and support
We lay the pipes along the agreed route, insulate them immediately to prevent condensation, and fix them to supports spaced to stop any sagging.
- 3
Wires and drain pipe
We run the control and power wires alongside the copper in a tidy arrangement that makes future servicing straightforward, and we fit the condensate drain pipe with a fall that carries water clear of the indoor unit.
- 4
Pressure test and vacuum
We pressurise the line to find any joint leak before charging, then vacuum it to remove air and moisture with a vacuum pump. Once the reading holds, the line is ready for refrigerant.
Why Alrabih?
A thorough run or a quick one?
| Alrabih | The usual way | |
|---|---|---|
| Insulation | Full, fitted immediately | Partial or left for later |
| Supports | Evenly spaced | Too few or missing |
| Pressure test | Always before charging | Sometimes skipped |
| Vacuum | Pump with reading held | Neglected in many cases |
| Control wiring | Laid with the copper, tidy | Left to a later stage |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
Copper piping works in cities near Taif
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Taif
What sets this city apart
Villas, summer homes and hotels in Taif are scattered on mountain slopes, each needing central or multi-unit cooling. Summers are mild and winters cool, but day-night variation is large and humidity fluctuates with altitude. Water and condensate drainage on slopes needs special care, and copper pipes may need longer routes to avoid moisture pooling in cavities.
Taif is a highland city in the Sarawat mountains known for rose farms and summer retreat, with mild summers and cool winters.
A common setup in Taif villas is a concealed indoor unit with the outdoor unit on a separate terrace or roof, with moderately insulated copper.
The AC setup in Taif
- 1
Insulated copper in villa walls
In mountain villas, copper usually runs inside walls from the indoor unit downward, protected from fluctuating humidity.
- 2
Copper on exposed exterior terraces
The outdoor unit may be on an exposed separate terrace, so copper runs fully insulated and protected from wind and moisture.
- 3
Supports allowing thermal expansion
Supports are fixed to allow slight copper expansion with daily changes, not rigid fixing that prevents movement.
Before the visit
Before our visit in Taif
- 1
Prepare the site plan and elevations
Send the villa plan with elevations, so we can calculate copper length and drainage slopes required on the mountain terrain.
- 2
Confirm the outdoor unit location on the terrace
Agree precisely where the outdoor unit will be: on a separate terrace or on a roof, so we know the copper route and insulation needed.
- 3
Coordinate drainage with the site
Ensure the final drainage point for condensate is known and marked on the site plan, so water does not pool near the villa foundation or affect the slopes.
Other services in Taif
FAQ
Questions about Copper piping works
How does pipe diameter differ between a split and a central system?
The diameter depends on the system's capacity and the distance between the units, not on the system type alone. A central system serving a whole building needs larger diameters than a split for a single room. The survey and the unit datasheet set the right size; the wrong choice weakens performance or raises electricity consumption.
Why is the pipe insulated right after laying and not at the end of the job?
Condensation forms on the cold pipe surface as soon as the system runs. If the copper is left bare during installation, moisture gets between the pipe and the insulation and reduces its performance. Insulating immediately prevents this and protects the copper surface from early oxidation.
Can you run the copper inside finished walls or ceilings?
Yes, in suspended ceilings or service voids where access allows. Inside a finished concrete wall access is limited and may need extra building work. The survey identifies the practical route, and where concealment is not possible we use protective sleeves on the surface.
Why does the condensate drain matter in a copper piping job?
The indoor unit produces steady condensate. Without enough fall in the drain pipe, or if it is routed in a way that blocks flow, water backs up in the tray and spills onto the ceiling or wall. We run it with a proper fall and separately from the other pipes.
How does a city's climate affect the insulation on copper pipe?
The building's conditions and its city's climate can degrade pipe insulation when the material is not vapour-resistant or when joints are left unsealed. We use Armaflex or Kimmco materials and seal every joint carefully so that moisture cannot reach the cold copper surface and start early corrosion.
How do we handle condensate drainage on slopes?
We coordinate with the engineer to direct drainage pipes toward natural slopes or designated drains, so water does not pool in cavities or approach villa foundations.
Does Taif's winter cold affect copper and insulation efficiency?
Cold does not reduce insulation efficiency; it may even make the temperature difference around the copper smaller. We choose insulation based on the mild summer and the large day-night variation.
What is the maximum copper length we supply from Jeddah to a mountain villa in Taif?
We supply copper runs of up to 30 metres without welded joints. In mountain villas the distance between the indoor and outdoor unit may be fairly short, and we calculate it based on design and route.
Do Taif's large daily temperature swings affect copper joints?
Copper joints are sealed before refrigerant charging, and daily swings cause slight expansion and contraction. We use strong joints and run extra copper around holes and openings to absorb the changes.


























































































