Commercial duct cleaning
Central AC duct cleaning in Al Shifa
Al Shifa in South Jeddah has modern residential towers and small clinics with central AC distributing clean air to multiple flats and clinics. Dust and humidity accumulate in the ducts, cutting pressure and flow, so we clean the runs and coils to restore performance.
- Live cleaning
- Coils and trunks
- Resealed access
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When does a central system need duct cleaning?
- 1
Repeated complaints from occupants
Staff complaining of stale air, dust settling on surfaces quickly or uneven temperatures between rooms. These often point to buildup inside the ductwork rather than a refrigerant fault, and cleaning is the right first step before any other adjustment.
- 2
AHU running harder than it should
A dust-coated AHU coil blocks heat transfer, so the motor runs longer without reaching the set temperature. Cleaning the coil and plenum recovers the efficiency the unit has lost gradually as deposits built up.
- 3
A building with no duct cleaning history
Many offices, schools and government buildings in Jeddah run their central system for years without opening the ductwork. Dust and salt from Jeddah's coastal air build up in the metal trunks until the galvanised layer is affected and corrosion begins.
Who it's for
Office staff complaining of stale air and dust
We survey the duct network and plenum, then set a section schedule that lets your staff keep working throughout the cleaning.
Ask on WhatsAppPreparing your school or clinic before opening
We cut access doors in the main trunks and clean the coil and plenum before occupants arrive, then fit and seal metal access doors airtight.
Ask on WhatsApp
What the cleaning covers
- Camera inspection before work
- Main trunk section by section
- AHU coil and plenum
- Access doors cut and resealed
- Pressure and airflow check
How we work
How we work
- 1
Survey and plan
A technician visits, maps the duct network, marks where access doors will go and agrees the section order with you so the occupied parts of the building stay clear of the work area.
- 2
Open and isolate the section
We cut access doors in the main trunks at the agreed points, isolate the section with temporary dampers and photograph the interior with a camera to record its condition before cleaning starts.
- 3
Agitate and vacuum
Powered brushes break loose the deposits and lift compacted dust while an industrial vacuum unit works in the opposite direction, collecting everything displaced without letting it spread through the occupied space.
- 4
Seal, run and test
Access doors are fitted and sealed airtight, then we run the system and measure flow at the grilles to confirm balance is restored across the sections we cleaned.
Methodical cleaning or surface cleaning?
| Alrabih | The usual way | |
|---|---|---|
| Main trunks | Access doors and industrial vacuum | Cleaned from grilles only |
| AHU coil | Direct clean with documentation | Left or wiped on the surface |
| Building continuity | Section by section, no full shutdown | All areas shut at once |
| Access doors | Sealed and tested after fitting | Sealed with adhesive tape |
| Condition record | Camera photos before and after | No visual record |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Shifa's residential towers are relatively new and tall, relying on unified central AC for each tower or section, and small clinics attached to the towers share the same AC system. Humidity and dust from doors and balconies accumulate quickly in vertical and horizontal ducts, and cleaning needs coordination with tower management to isolate sections safely without cutting air to residents.
Al Shifa sits in South Jeddah, a newer district of tall residential towers and small clinics attached to them.
Central AC systems in the towers distribute air through vertical ducts running from the roof to ground level, with horizontal branches to each flat.
The AC setup in Al Shifa
- 1
Vertical and horizontal systems in residential towers
Vertical ducts run from the roof through all floors, with horizontal branches to each flat, requiring methodical cleaning.
- 2
Central AHU on the roof
The central AHU sits on the roof and feeds the vertical ducts, and cleaning its coils is key to restoring cooling efficiency.
- 3
Isolation dampers between sections
The ducts have isolation dampers that allow cleaning each section without affecting the rest.
Before the visit
Before our visit in Al Shifa
- 1
Get approval from tower management and residents
Tell tower management and residents about the cleaning date and which sections will be temporarily isolated, so no one is surprised by reduced airflow.
- 2
Locate the central unit, plenums and branches
Tell us where the AHU is on the roof and where the vertical ducts and diffusers are on each floor so we can plan efficiently.
- 3
Ensure safe drainage for water and debris
Confirm there are safe drainage outlets on the roof or in corridors so water and debris don't spill into flats or affect residents.
More districts for Central AC duct cleaning
Other services in Al Shifa
FAQ
Questions about Central AC duct cleaning
Can duct cleaning be done without shutting the whole system down?
Yes, section-by-section working is standard on large buildings. We isolate the section being cleaned with temporary dampers and work on it while the rest of the building continues running normally. The surveyor sets the section schedule after seeing the network layout.
How do you control airflow through dampers during section-by-section cleaning?
Before isolating any section, the technician checks and closes the associated dampers so that suction is directed into the section being cleaned and dust cannot travel into adjacent zones. Once a section is finished, the dampers are returned to their original positions and air distribution is checked before the team moves to the next section.
How do you handle access doors in suspended ceilings?
We agree the door positions with building management during the survey so they do not affect the visible finish. We cut the duct and fit metal doors screwed and sealed airtight. If ceiling tiles need to be cut, we coordinate that with whoever is responsible for the fit-out.
Do you clean the AHU coil and its filters in the same visit?
Yes, AHU coil and plenum cleaning is a core part of the central duct work, not a separate job. Filters are inspected in the same visit, and if they are badly damaged they are replaced as part of the work. The technician decides the actual condition after a direct inspection of the unit.
How do you reach ductwork above areas with no ceiling access?
During the survey the technician maps the main duct positions relative to available void spaces and selects the nearest reachable points for cutting access doors. If certain sections are fully blocked, the technician decides after direct inspection whether an alternative route exists or whether coordination with the fit-out team is needed.
Does duct cleaning cut air to residents?
No, we clean section by section in coordination with tower management, keeping other sections running on fresh air throughout the cleaning.
There are many flats in the tower, how do you handle duct pressure during cleaning?
We clean methodically from top to bottom or vice versa, and isolate sections with dampers to prevent pressure changes in other areas.
Does the mould from South Jeddah's humidity in the ducts pose a health risk?
Yes, mould and fungi in the ducts affect air quality and health, so regular cleaning is essential to keep the air safe.
The clinics in the tower need especially clean air, how do you handle them?
We clean clinic ducts with the same precision and standards we apply to residential sections, giving them priority in scheduling if possible.












































































