AC duct manufacturing in Abha, Asir Region
AC duct manufacturing in Abha serves stone villas, hotels, resorts and government buildings in the Asir city. We fabricate duct to precise sizes and strong insulation, and deliver it ready to install in your projects.
4.9 on Google- Sealed seams
- Full insulation
- Delivered ready
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When duct quality makes the difference
- 1
Duct losing cold air
An open seam or an unsealed joint loses cold air before it reaches the room. We close every seam with Foster sealant in the workshop before shipping, so the seal does not depend on site work alone.
- 2
Condensation wetting the ceiling
Any bare metal surface can sweat and drip onto the ceiling or damage the unit insulation, depending on the building's conditions and its city's climate. We wrap with Kimmco or Armaflex at the thickness the site calls for.
- 3
A project with many duct runs
A villa or commercial building needs main trunks, branches and plenums in several sizes. We make sections in the workshop numbered to the site plan, so the hanging crew assembles without cutting or adjusting.
Who it's for
Replacing your villa's AC and need new ductwork
We make supply and return trunks and plenums to your villa's dimensions, insulated and numbered, ready for the hanging crew without any on-site cutting.
Ask on WhatsAppRunning a commercial fit-out that needs duct runs
We take your project drawings and produce numbered sections in batches matched to your site schedule, so the hanging crew is never waiting on supply.
Ask on WhatsApp
What the job covers
What the manufacturing covers
- Supply and return trunks
- Unit plenums to opening size
- Seams sealed with Foster
- Kimmco or Armaflex outer wrap
- Numbered sections ready to hang
How we work
How we work
- 1
Send sizes or drawings
Send us the duct drawing or a list of section sizes. If sizes are not fixed yet, we agree a site survey before production starts.
- 2
Review sizes and sheet gauge
We check each section's dimensions and pick the right sheet thickness for the duct size, then confirm quantities with you before cutting begins.
- 3
Fabricate, seal and insulate
We cut and fold the G90 galvanised sheet, lock the seams with Foster sealant, and wrap each section with Kimmco or Armaflex insulation in the workshop before shipment.
- 4
Number and deliver
We mark each section with its position and dimension from the site plan, so the hanging team identifies every piece without confusion and starts work on arrival.
Why Alrabih?
Workshop-made or site-cut duct?
| Alrabih | The usual way | |
|---|---|---|
| Sealing | Foster on every seam in workshop | Uneven site sealing |
| Insulation | Kimmco or Armaflex fully wrapped | Partial or delayed wrap |
| Sheet gauge | Chosen for each duct size | One gauge for everything |
| Assembly time | Numbered, assembled straight away | Cut and adjust on site |
| Joint fit | Workshop dimensions close every joint | Hand trimming breaks the seal |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
AC duct manufacturing in cities near Abha
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Abha
What sets this city apart
Abha is a mountain city with stone villas on hillsides, hotels, resorts, residential towers and government buildings. Summers are mild because of the altitude, and winters are cold with possible rain and fog. Stone villas and resorts need duct with complex routes and strong insulation to keep cool air protected from cold and moisture. Workshop fabrication with Kimmco or Armaflex insulation and tight sealing keeps system efficiency intact through damp and cold seasons.
Abha is the capital of the Asir region in the mountains, with mild summers and cold, rainy, foggy winters, built largely of stone villas and hotels.
Stone villas and resorts in Abha need duct with thick insulation and tight sealing because winter rain, moisture and fog affect systems.
The AC setup in Abha
- 1
Complex duct for multi-storey resorts
Resort duct is fabricated with complex vertical and horizontal routes, thick insulation and tight sealing against winter moisture.
- 2
Duct for stone villas on hillsides
Villa duct follows hillside terrain and runs above false ceilings with strong insulation against cold, fog and rain.
- 3
Sealed sections ready to install
Duct is delivered in sealed sections with tight joints on every connection, so installation proceeds without delay and to high quality.
Before the visit
Before our visit in Abha
- 1
Prepare project and terrain drawings
Send the site plan, building drawing, terrain slope and topography before the visit, so we fabricate duct with routes suited to the mountain site.
- 2
Specify unit and outlet locations considering climate
Agree unit and outlet locations with the HVAC engineer, considering the cold and damp climate.
- 3
Arrange duct delivery to the mountain site
Tell us where the duct delivery can be unloaded at your mountain site and confirm installation timing with us and the site crew.
Other services in Abha
FAQ
Questions about AC duct manufacturing
How do you make sure the duct does not leak air at the seams?
We close the long seams with a tight mechanical lock as the sheet is formed, then seal every seam and every joint between sections with Foster sealant before insulating. Sections leave the workshop with matching flanges that tighten evenly when hung, because any small gap in cold duct means lost air and a point where condensation forms.
Does the duct arrive ready to hang, or is it assembled on site?
Sections arrive fabricated, insulated, sealed and numbered to the route drawing, so the fitters know where each piece goes without cutting or altering on site. What is left on site is joining the sections, fixing them to the hangers and connecting the unit and outlets, which shortens the work above the ceiling.
Do you make plenums for cassette and cabinet units?
Yes, we fabricate plenums for both types. A cassette unit plenum is measured to match the unit's outlet frame exactly so air reaches the branch runs without leaking at the connection. A cabinet unit plenum is made to carry both the supply and return paths if the design calls for it. Both types are insulated with Kimmco or Armaflex and sealed with Foster sealant before they leave the workshop.
Can you manufacture duct for a large commercial project?
Yes. The workshop is equipped to fabricate large supply and return trunk runs suited to commercial, government and industrial buildings. Each section is made to the project drawings, numbered and delivered ready to hang after insulation and sealing. When engineering drawings are available, the technical team reviews them before fabrication starts to confirm that the duct dimensions fit the ceiling voids on site.
Why are the duct sections insulated in the workshop before delivery?
The duct carries cold air through a ceiling void that may be hot. Without external insulation, water vapour condenses on the cold sheet and drips onto the false ceiling or the goods below, according to the building's conditions and its city's climate. So each section is wrapped in Kimmco or Armaflex in our workshop and every edge and joint is sealed with Foster sealant before delivery.
Do you fabricate duct for stone villas and resorts in Abha?
Yes, we fabricate duct for villas, resorts, hotels and residential and government buildings in Abha, with sizes and insulation set by the building and climate.
How does duct from Jeddah reach my mountain project in Abha?
We fabricate the duct in our workshop to the sizes and strong insulation required for the cold, damp climate, supply it to your Abha site, and agree delivery and installation dates with you.
How does strong insulation protect duct from winter rain and fog in Abha?
Strong Kimmco or Armaflex insulation protects duct from moisture and condensation, and tight Foster sealing on every joint prevents water and moisture ingress.
What is the difference between villa duct and resort duct in Abha?
Villa duct runs above false ceilings with shorter routes, while resort duct is complex, serving multiple floors and public areas. Insulation is strong in both against cold and moisture.


























































































