Duct fabrication in Al Baha, Al Baha Region
Duct fabrication in Al Baha accounts for the mountain climate and diverse architecture, from stone villas and hotels to government buildings. We measure the site or drawings, fabricate the duct in our Jeddah workshop, then supply it to your Al Baha site ready to install.
4.9 on Google- G90 sheet
- Site dimensions
- Complex fittings
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
Who needs workshop-fabricated duct?
- 1
A contractor with project-specific sizes
Your project has non-standard sizes or volumes too large for site cutting. We fabricate rectangular and round sections from your drawings at exact dimensions, labelled and ready to hang when they reach the site.
- 2
Fittings too awkward to cut on site
Elbows, transitions, offsets and takeoffs come out distorted when cut by hand on site, leaking air and creating noise in the line. We make them in the workshop at the right dimensions with tight seams.
- 3
Extending or renovating an existing duct network
You need new branches, a damaged section replaced or a fitting that matches an old duct size. We measure the existing network on site and fabricate the pieces to match what is already there.
Who it's for
Building a facility that needs non-standard duct sizes
We read your project drawings and fabricate all sections and fittings at exact dimensions from G90 or aluminium sheet, labelled and ready to hang the moment they reach your site.
Ask on WhatsAppRenovating home AC and need fittings to match old duct
We measure the existing ductwork in your home and fabricate the branches, transitions and elbows needed to match the original duct without replacing the whole network.
Ask on WhatsApp
What the job covers
What the fabrication covers
- Site measure or drawings
- G90 or aluminium duct
- Elbows transitions and takeoffs
- Tight seams to SMACNA
- Labelled sections ready to hang
How we work
How we work
- 1
Take measurements
A technician visits the site or you send us the drawings; we list every duct section needed, its size and the correct sheet thickness for that section.
- 2
Fabricate sections and fittings
We cut, form and lock the sheet in the workshop, including all elbows, transitions, offsets and takeoffs, and each section comes out at its exact dimension.
- 3
Label and prepare for delivery
We number every section and fitting against the assembly plan so the installation crew knows exactly where each piece goes, with no guessing on site.
- 4
Deliver to site
We deliver the duct to your site protected and ready to hang. If you need an installation crew, we can arrange that as a separate step.
Why Alrabih?
Workshop fabrication or site cutting?
| Alrabih | The usual way | |
|---|---|---|
| Dimensional accuracy | Workshop machines, tight dims | Hand variation on site |
| Complex fittings | Correct elbows and transitions | Distorted, leaking air |
| Seam quality | Tight lock, low leakage | Gaps weaken pressure |
| Site schedule | Arrives ready to hang | Extra time and site noise |
| Site and climate conditions | Aluminium where site demands | One sheet regardless |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
Duct fabrication in cities near Al Baha
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Al Baha
What sets this city apart
Al Baha is a mountain city among juniper forests and terraced villages, with stone villas, hotels, resorts, government buildings and schools. Summers are mild and winters cold, so duct needs good insulation to keep air temperature steady and tight fittings that hold heat. Workshop fabrication achieves precise sizes and joint quality that keeps cooling and heating efficient year-round.
Al Baha is a mountain city in the Al-Bahah Region among juniper forests and terraced villages, with mild summers and cold winters, built of stone villas, hotels, resorts and government buildings.
Duct fabricated in the workshop for mountain villas and hotels in Al Baha arrives insulated and with fixed joints, ready to work with heating and cooling systems.
The AC setup in Al Baha
- 1
Insulated duct for the mountain climate
In mountain Al Baha, duct is supplied with thick insulation to protect air from losing heat in winter or gaining it in summer.
- 2
Custom fittings for hotels and resorts
Hotels and resorts in Al Baha need duct with large mains and complex fittings fabricated in the workshop to high precision.
- 3
Duct for mountain stone villas
Stone villas in Al Baha need duct with planned routes inside stone walls and ceilings, fabricated to sizes that fit the traditional buildings.
Before the visit
Before our visit in Al Baha
- 1
Send the plan and mountain site measurements
Send the architectural plan and site measurements, with notes on the stone construction and altitude, so we fabricate duct to sizes that fit the location.
- 2
Agree the insulation levels needed
Agree with us the insulation levels needed for the use (residential or hotel), so we fabricate duct with the right insulation.
- 3
Coordinate mountain site duct delivery
Agree with us the delivery date of the duct to your mountain Al Baha site, specifying the access route and unloading place.
Other services in Al Baha
FAQ
Questions about Duct fabrication
Can you fabricate from drawings without visiting the site?
Yes, when the drawings are clear and carry the actual as-built dimensions. If a dimension is uncertain or a field change has been made, we prefer a site visit to avoid a fabricated piece that does not fit. We discuss the better approach with you before starting work.
What is the difference between galvanized and aluminium sheet for duct?
G90 galvanized sheet is the standard choice for interior duct: strong and suited to a range of pressures. Aluminium is lighter and handles exposed conditions better, making it right for some outdoor applications or where structural load is a limiting factor. The building's conditions and its city's climate determine the correct choice.
Can you make elbows and transitions to match an existing duct network?
Yes. We measure the existing network on site to match sizes precisely, whether you need a new branch added, a damaged fitting replaced or an extension tied into the original ductwork. The right approach is confirmed after the site visit.
How do you choose sheet thickness for each section?
Thickness follows section size: a large duct needs heavier sheet to hold its shape under pressure, a small one can use lighter material. We apply the SMACNA requirements to each section in the project individually, not a single thickness across the whole job.
Does climate affect which sheet material to use?
Yes, particularly for sections exposed to outdoor air or installed near fresh-air intakes. G90 galvanized sheet performs well inside the building, but aluminium is the better choice where duct faces continuously harsh air conditions. The site survey accounts for the building's conditions and its city's climate to determine the right material for each section.
How is duct for mountain Al Baha different from other cities?
The mountain climate, cold in winter and mild in summer, calls for well-insulated duct, so we recommend extra insulation and sealed joints to ensure heat is not lost. Workshop fabrication delivers this quality before supply to the site.
How does the duct made in Jeddah reach my project in Al Baha?
We measure the site or review the drawings, fabricate the duct in our Jeddah workshop to the design sizes and suited to the mountain project, then supply it to your Al Baha site on an agreed schedule.
Can the duct handle Al Baha's cold winters and mild summers?
Galvanized steel or aluminium duct withstands temperature swings, and strong insulation keeps air temperature steady for summer cooling or winter heating. We choose material and insulation after surveying the site.
Do you fabricate duct for hotels and resorts in Al Baha?
Yes. We fabricate duct for Al Baha hotels and resorts with large mains and complex branches to the design, arriving insulated and ready for direct installation.


























































































