Desert cooler, proper duct
Evaporative (desert) duct installation in Al Sawari
In Al Sawari, north Jeddah, evaporative duct installation suits the villas and larger shops needing low-cost cooling across open spaces. Alrabih's team mounts the cooler on the roof and runs galvanised duct to all rooms with exhaust openings for air to escape.
- Sealed roof
- Galvanised duct
- Air changes
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When you need evaporative cooler duct
- 1
A large workshop or warehouse
Large industrial spaces get very hot in Jeddah summers and split units are expensive to run there. An evaporative cooler with distribution duct brings air to work areas at lower running cost, provided the space is ventilated and not sealed shut.
- 2
A majlis tent or seasonal space
Outdoor majlis areas and seasonal tents do not suit split AC units because of the structure. Evaporative duct delivers a cool air stream as long as the space is open enough for air changes, which the survey confirms.
- 3
Old duct with poor airflow
Old sheet duct cracks over time and air leaks from the joints before reaching the space. On site we check whether the problem is leaking duct, poor distribution, or the cooler size itself.
Who it's for
Need to cool a large workshop at reasonable running cost
We survey the workshop and check its ventilation, then run galvanised duct from the roof cooler to the work areas with exhaust openings that keep air moving through the space.
Ask on WhatsAppYou have an outdoor majlis that needs seasonal cooling
We check how open the majlis is and assess its structure, then design the duct route and exhaust openings so cool air reaches the seating area without humid air building up inside.
Ask on WhatsApp
What the work covers
- Weatherproof roof collar fitted
- G90 galvanised duct runs
- Branch and air outlet connections
- Exhaust openings for air changes
- Airflow check after start-up
How we work
How we work
- 1
Site survey first
We visit, measure the space and check how open it is, because evaporative cooling needs enough ventilation; without it humidity rises inside and the cooling effect drops.
- 2
Plan the duct route
We plan the main duct run, branches, air outlet positions and exhaust opening locations, and show you the layout before any work starts.
- 3
Install duct and seal roof
We open the roof, fit and seal the collar against leaks, then run the galvanised duct and hang it on proper supports so it does not sag.
- 4
Start-up and test
We run the evaporative cooler and check that air reaches every outlet and that the exhaust openings are working so fresh air is visibly moving through the space.
Planned duct or a quick run?
| Alrabih | The usual way | |
|---|---|---|
| Roof seal | Weatherproof, sealed collar | Silicone that cracks in heat |
| Sheet | G90 galvanised | Unspecified gauge |
| Exhaust | Sized openings for air changes | Left to chance |
| Space suitability | Confirmed by survey | Not checked |
| Duct supports | Fixed hangers along the full run | Duct left unsupported |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Sawari is a relatively modern residential district of detached villas and some commercial clusters, with spacious flat roofs that are easy to access, making cooler installation straightforward. The open spaces between villas allow efficient air exhaust, and the sandy soil and low coastal humidity here give the evaporative system better performance than in damper seaside areas. The galvanised duct needs secure fixing on flat roofs to withstand seasonal winds.
Al Sawari lies in north Jeddah, comprising detached villas and a range of shops and offices in modern buildings.
Most villas here have spacious flat roofs suited to cooler installation without major structural constraints.
The AC setup in Al Sawari
- 1
Roof-mounted cooler with central galvanised duct
The cooler sits on the flat roof and the duct distributes chilled air from one point to all rooms in the villa or shop.
- 2
Air exhaust openings in outer walls
Warm air exits through openings in the outer walls or windows, achieving balance between intake and exhaust.
- 3
Roof sealing against water and dust
We open the roof carefully around the cooler mounting and reseal it with tight weatherproofing to prevent leaks in the rainy season.
Before the visit
Before our visit in Al Sawari
- 1
Ensure safe roof access for the team
Check that the ladder or stairway to the roof is secure and the roof space is safe for working and mounting.
- 2
Mark out the exact rooms to be cooled
Tell us which rooms need duct and outlets, whether living areas, bedrooms, or office spaces in the shop.
- 3
Clear roof space near existing openings
Clear space on the roof near existing drainage or vent openings so the cooler installation goes smoothly.
More districts for Evaporative (desert) duct installation
Other services in Al Sawari
FAQ
Questions about Evaporative (desert) duct installation
Does evaporative cooling work in Jeddah in summer?
Evaporative cooling relies on water evaporation and weakens when humidity is high. In Jeddah, humidity is higher near the coast and lower inland. The survey decides whether the space and the season are suitable, which is why we do not start before visiting the site.
Why do exhaust openings matter as much as the duct runs?
An evaporative cooler pushes fresh air in continuously. Without an exit path, humid air builds up inside and the felt temperature rises. Properly sized exhaust openings keep air moving through, not piling up, and that is the core of how this type of cooling works.
What sheet do you use for the duct?
We use G90 galvanised steel sheet, which resists rust in Jeddah's humid and salty air. The duct sections are formed in our workshop before being taken to site, then hung on supports along the run to stop them sagging.
Can one cooler supply duct to more than one area?
Duct can be branched from one unit to more than one outlet, but each branch reduces the airflow at every opening. The survey decides whether the cooler has enough output for the total area, or whether a separate unit for each wing is the better answer.
Can evaporative cooler duct run through a false ceiling?
Evaporative cooling depends on continuous air movement and exchange, which requires exhaust openings in the same space the duct serves. A false ceiling restricts that flow unless dedicated openings lead air out of the building. The site survey decides whether the structure allows it, because the duct run and the exhaust are designed together as one system, not separately.
Does evaporative duct cooling suit a villa with a flat roof in Al Sawari?
Yes, a spacious flat roof is ideal for the cooler. We secure the unit safely and run the duct easily to the villa's rooms.
Winds in Al Sawari can be strong, how do you secure the duct on the roof?
We fix the galvanised duct with heavy-duty clamps and metal brackets designed to withstand seasonal winds, and test the security before start-up.
Do the open spaces here help the cooler discharge air properly?
Yes, the spacing between villas lets air discharge freely from the outlets, which improves the cooler's efficiency.
Al Sawari's soil is sandy, does that affect the cooler's performance?
The sandy soil and relatively low humidity in Al Sawari give the evaporative cooler better performance than in more humid coastal areas.
