Duct insulation in Al Kawthar, Jeddah
In Al Kawthar in east Jeddah, where large residential compounds and multi-storey residential buildings cluster, uninsulated metal ducts sweat constantly because of coastal humidity and salty air. Alrabih's team wraps the air ducts in glass-wool insulation and seals every joint with a proper vapour barrier to stop water dripping on false ceilings and inside building walls.
4.9 on Google- Glass-wool wrap
- Vapour seal
- No condensation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When duct insulation becomes urgent
- 1
Damp patches on the false ceiling
Damp stains or drips under the false ceiling in summer usually mean cold duct with no proper insulation. Humid air touches the cold metal, condenses, falls onto the ceiling boards and ruins the plaster and paint.
- 2
Old, cracked or loose insulation
Insulation that has cracked, pulled away from the metal or been soaked by a past leak no longer stops vapour. Even a small gap between two sections is enough for moisture to condense on the metal and restart the dripping problem.
- 3
New duct you want fully insulated
When new air ducts are installed in a home or commercial building, insulation is part of the work, not an afterthought. We wrap the duct and seal the joints before the ceiling is closed so it never needs to be opened again for this reason.
Who it's for
Noticing damp patches on your room ceiling
We survey the duct, wrap it in glass-wool and seal every joint so condensation stops completely.
Ask on WhatsAppInstalling new duct in a commercial building
We wrap the duct in glass-wool and seal all joints before the ceiling closes, with a one-year warranty.
Ask on WhatsApp
What the job covers
What the insulation work covers
- Duct route and insulation survey
- Glass-wool wrap over duct
- Vapour-sealed joints and corners
- Plenum box and connections insulated
- Fixed with correct fasteners
How we work
How we work
- 1
Ceiling and duct survey
The technician inspects the duct route and any existing insulation, then marks the sections that need new wrapping or re-insulation before work begins.
- 2
Surface prep and strip-out
Damaged or wet insulation is stripped off and the metal surface cleaned so the new material bonds properly with no air pockets trapped beneath.
- 3
Wrap and seal
We wrap the duct in glass-wool and cover every joint, corner and connection with the correct vapour barrier, using Foster, Armaflex or Kimmco sealing materials as the site requires.
- 4
Check and handover
The technician checks the insulation along the full route, confirms the wrap is secure and joints are gap-free, then hands over the completed work with a one-year warranty and competitive prices.
Why Alrabih?
Sealed insulation or a surface cover?
| Alrabih | The usual way | |
|---|---|---|
| Vapour barrier | Sealed at every joint and corner | Left open or incomplete |
| Joins between sections | Closed with correct sealant | Tape that peels off |
| Plenum box and connections | Insulated with the rest | Sometimes left bare |
| Drips after fitting | Stops when sealing is correct | Returns within weeks |
| Sheet material | G90 galvanized sheet from SABIC | Sheet of unspecified grade |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Kawthar's buildings mix small villas, large compounds and tall residential blocks where false ceilings are common. Ducts running through these false ceilings face a large temperature difference between the cold air inside the duct and the warm, humid air around it, speeding up condensation. Glass-wool insulation with a sealed vapour barrier cuts this temperature gap and stops dew and the drips that damage ceilings and interior insulation.
Al Kawthar in east Jeddah holds a mix of residential building types, from villas to large compounds and residential towers.
Most residential buildings and compounds in Al Kawthar have false ceilings hiding the duct, pipes and wiring, which calls for precise insulation of every joint to protect against leaks.
The AC setup in Al Kawthar
- 1
Central duct from fan room to multiple floors
Tall buildings and large compounds need a vertical main duct running between floors, and insulating them together maintains distribution efficiency.
- 2
Separate flexible runs for each residential unit
Each unit gets a separate flexible run from the main duct, and insulating them individually simplifies later maintenance and repairs.
- 3
False ceilings at varying heights
False ceilings in Al Kawthar may sit at different heights depending on building design, and the insulation must fit each height and route.
Before the visit
Before our visit in Al Kawthar
- 1
Get full duct plans from the contractor
Request a complete plan of the duct route across floors and the location of joints and branches so we can estimate areas and insulation length needed.
- 2
Coordinate with building or compound management for safe access
Make sure the team can reach the fan room and false ceilings without clashing with other work or unit occupants.
- 3
Provide safe temporary storage for materials
Reserve a safe corner near the work area to store the glass-wool rolls and other materials during installation.
More districts for Duct insulation
Other services in Al Kawthar
FAQ
Questions about Duct insulation
Why does duct sweat more in Jeddah than in other places?
Jeddah combines intense heat with high humidity, especially near the coast. Cold air inside the duct chills the metal, and the warm humid air outside condenses on it immediately if there is no insulation keeping vapour away from the metal surface.
Can duct be insulated after the false ceiling is closed?
It depends on the size of existing access hatches and the duct route. In some areas the work can be done through the hatches already there; in others a section of ceiling needs to be opened. The survey decides the right approach before any work starts.
What is the difference between Armaflex, Kimmco and Foster for duct insulation?
Armaflex and Kimmco are flexible insulation materials used for wrapping duct and reducing condensation. Foster is a sealant applied to joints and connections to block vapour from passing through. We choose the right material for each part of the duct after the site survey, and may use more than one on a single project.
Do you insulate duct in commercial and industrial projects too?
Yes, we work in residential, commercial, industrial and government buildings across all Jeddah districts. Project size affects quantities and coordination with other trades, which the survey maps out. Discounts by quantity and project size apply to larger works.
Does the plenum box need different insulation from the rest of the duct?
The plenum box has a larger surface area and cools quickly in Jeddah's humid air, making it especially prone to condensation. The technician wraps it in glass-wool and seals its corners and openings with the correct vapour barrier. The sealant chosen may differ from the one used on the rest of the duct route, depending on what the survey finds.
Do high-rise residential towers need different duct insulation from villas?
No, the principle is the same: stop condensation on metal duct with glass-wool insulation and a vapour barrier. But high-rise buildings need closer coordination with the contractor because the duct spans many floors and complex ceiling layouts.
How do you handle duct in compounds with multiple units?
We insulate each branch from the main duct to a residential unit separately, sealing the joints at split points with a tight vapour barrier to stop warm, humid air leaking into the cold duct.
Does the salty coastal air affect the quality of glass-wool insulation?
The glass insulation itself resists the coastal effects, but we choose a vapour barrier that protects the metals from rust and corrosion caused by salt and humidity.
Does duct insulation reduce noise from air flow in the buildings?
Yes, the glass-wool dampens the sound of air flow and fan vibrations, especially in false ceilings near living spaces.


























































































