Duct insulation in Al Mahjar, Jeddah

In Al Mahjar, south Jeddah, residential buildings and commercial units spread across relatively open spaces; duct insulation prevents condensation from high humidity and coastal air. Alrabih applies glass-wool to air ducts and seals every joint with a durable vapour barrier.

4.9 on Google
  • Glass-wool wrap
  • Vapour seal
  • No condensation

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When duct insulation becomes urgent

  1. 1

    Damp patches on the false ceiling

    Damp stains or drips under the false ceiling in summer usually mean cold duct with no proper insulation. Humid air touches the cold metal, condenses, falls onto the ceiling boards and ruins the plaster and paint.

  2. 2

    Old, cracked or loose insulation

    Insulation that has cracked, pulled away from the metal or been soaked by a past leak no longer stops vapour. Even a small gap between two sections is enough for moisture to condense on the metal and restart the dripping problem.

  3. 3

    New duct you want fully insulated

    When new air ducts are installed in a home or commercial building, insulation is part of the work, not an afterthought. We wrap the duct and seal the joints before the ceiling is closed so it never needs to be opened again for this reason.

Who it's for

  • Noticing damp patches on your room ceiling

    We survey the duct, wrap it in glass-wool and seal every joint so condensation stops completely.

    Ask on WhatsApp
  • Installing new duct in a commercial building

    We wrap the duct in glass-wool and seal all joints before the ceiling closes, with a one-year warranty.

    Ask on WhatsApp

What the job covers

What the insulation work covers

  • Duct route and insulation survey
  • Glass-wool wrap over duct
  • Vapour-sealed joints and corners
  • Plenum box and connections insulated
  • Fixed with correct fasteners
Request a quote

How we work

How we work

  1. 1

    Ceiling and duct survey

    The technician inspects the duct route and any existing insulation, then marks the sections that need new wrapping or re-insulation before work begins.

  2. 2

    Surface prep and strip-out

    Damaged or wet insulation is stripped off and the metal surface cleaned so the new material bonds properly with no air pockets trapped beneath.

  3. 3

    Wrap and seal

    We wrap the duct in glass-wool and cover every joint, corner and connection with the correct vapour barrier, using Foster, Armaflex or Kimmco sealing materials as the site requires.

  4. 4

    Check and handover

    The technician checks the insulation along the full route, confirms the wrap is secure and joints are gap-free, then hands over the completed work with a one-year warranty and competitive prices.

Start with step one

Why Alrabih?

Sealed insulation or a surface cover?

AlrabihThe usual way
Vapour barrierSealed at every joint and cornerLeft open or incomplete
Joins between sectionsClosed with correct sealantTape that peels off
Plenum box and connectionsInsulated with the restSometimes left bare
Drips after fittingStops when sealing is correctReturns within weeks
Sheet materialG90 galvanized sheet from SABICSheet of unspecified grade
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

The area mixes mid-rise residential blocks, commercial units and small workshops, where ductwork typically runs in suspended ceilings or tight inter-storey spaces. Humid coastal air accelerates condensation on bare ducts, and dripping water damages ceilings and stock, so insulation must be effective and continuous across the entire run.

Al Mahjar in south Jeddah is a mixed residential and commercial area with moderate building density and variable street widths.

Most buildings here have central ductwork, with branches often running through suspended ceilings of limited height, requiring precise insulation around joints.

The AC setup in Al Mahjar

  1. 1

    Main duct in tight ceiling with multiple branches

    Branches distributed across floors run through tight suspended ceilings; we insulate each separately with tightly sealed vapour barriers at every joint.

  2. 2

    Short flexible ducts for commercial units

    Each commercial unit has a short flexible connection from the main duct, which needs careful insulation from installation.

  3. 3

    Plenum box on first floor or roof

    The plenum box may be on a lower floor surrounded by buildings or on the roof exposed to heat and humidity.

Before the visit

Before our visit in Al Mahjar

  1. 1

    Specify exact duct location and key joints

    Show us a plan of the duct route, joints and branches, and identify any points that may need repair before insulation.

  2. 2

    Coordinate with shops or flats on working hours

    Inform tenants or shop owners about the visit and expected duration to minimise disruption.

  3. 3

    Confirm easy access to suspended ceiling

    Verify that safe access points to the suspended ceiling exist, or agree with us on temporary openings.

FAQ

Questions about Duct insulation

Why does duct sweat more in Jeddah than in other places?

Jeddah combines intense heat with high humidity, especially near the coast. Cold air inside the duct chills the metal, and the warm humid air outside condenses on it immediately if there is no insulation keeping vapour away from the metal surface.

Can duct be insulated after the false ceiling is closed?

It depends on the size of existing access hatches and the duct route. In some areas the work can be done through the hatches already there; in others a section of ceiling needs to be opened. The survey decides the right approach before any work starts.

What is the difference between Armaflex, Kimmco and Foster for duct insulation?

Armaflex and Kimmco are flexible insulation materials used for wrapping duct and reducing condensation. Foster is a sealant applied to joints and connections to block vapour from passing through. We choose the right material for each part of the duct after the site survey, and may use more than one on a single project.

Do you insulate duct in commercial and industrial projects too?

Yes, we work in residential, commercial, industrial and government buildings across all Jeddah districts. Project size affects quantities and coordination with other trades, which the survey maps out. Discounts by quantity and project size apply to larger works.

Does the plenum box need different insulation from the rest of the duct?

The plenum box has a larger surface area and cools quickly in Jeddah's humid air, making it especially prone to condensation. The technician wraps it in glass-wool and seals its corners and openings with the correct vapour barrier. The sealant chosen may differ from the one used on the rest of the duct route, depending on what the survey finds.

The suspended ceiling is low, how do you apply insulation in tight space?

We work carefully in confined spaces, applying glass-wool and vapour barriers by hand without damaging other installations.

Small workshops need to keep operating; how do you coordinate timing?

We agree on working hours that do not clash with workshop operations, completing insulation for each section efficiently.

Humidity is high by the coast, is the vapour barrier alone enough?

Glass-wool plus vapour barrier together form an integrated insulation system that isolates the cold duct from humid air and effectively reduces condensation.

Does insulation seal existing cracks in the duct or does it need repair first?

We inspect the duct before insulation and repair any existing damage; the insulation protects the outer surface but does not seal internal gaps.

The Jeddah corniche in cool weather

Stop the duct dripping for good

WhatsApp us a photo of the false ceiling or bare duct and we will arrange a survey in your district, Saturday to Thursday, eight in the morning to eight in the evening.

CallWhatsApp