Duct insulation in Al Marwah, Jeddah
In Al Marwah in central Jeddah, mid-rise residential and commercial buildings rely on central AC with duct needing proper insulation. Alrabih's team wraps metal duct in glass insulation and seals every corner with a vapour barrier to prevent moisture condensation.
4.9 on Google- Glass-wool wrap
- Vapour seal
- No condensation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When duct insulation becomes urgent
- 1
Damp patches on the false ceiling
Damp stains or drips under the false ceiling in summer usually mean cold duct with no proper insulation. Humid air touches the cold metal, condenses, falls onto the ceiling boards and ruins the plaster and paint.
- 2
Old, cracked or loose insulation
Insulation that has cracked, pulled away from the metal or been soaked by a past leak no longer stops vapour. Even a small gap between two sections is enough for moisture to condense on the metal and restart the dripping problem.
- 3
New duct you want fully insulated
When new air ducts are installed in a home or commercial building, insulation is part of the work, not an afterthought. We wrap the duct and seal the joints before the ceiling is closed so it never needs to be opened again for this reason.
Who it's for
Noticing damp patches on your room ceiling
We survey the duct, wrap it in glass-wool and seal every joint so condensation stops completely.
Ask on WhatsAppInstalling new duct in a commercial building
We wrap the duct in glass-wool and seal all joints before the ceiling closes, with a one-year warranty.
Ask on WhatsApp
What the job covers
What the insulation work covers
- Duct route and insulation survey
- Glass-wool wrap over duct
- Vapour-sealed joints and corners
- Plenum box and connections insulated
- Fixed with correct fasteners
How we work
How we work
- 1
Ceiling and duct survey
The technician inspects the duct route and any existing insulation, then marks the sections that need new wrapping or re-insulation before work begins.
- 2
Surface prep and strip-out
Damaged or wet insulation is stripped off and the metal surface cleaned so the new material bonds properly with no air pockets trapped beneath.
- 3
Wrap and seal
We wrap the duct in glass-wool and cover every joint, corner and connection with the correct vapour barrier, using Foster, Armaflex or Kimmco sealing materials as the site requires.
- 4
Check and handover
The technician checks the insulation along the full route, confirms the wrap is secure and joints are gap-free, then hands over the completed work with a one-year warranty and competitive prices.
Why Alrabih?
Sealed insulation or a surface cover?
| Alrabih | The usual way | |
|---|---|---|
| Vapour barrier | Sealed at every joint and corner | Left open or incomplete |
| Joins between sections | Closed with correct sealant | Tape that peels off |
| Plenum box and connections | Insulated with the rest | Sometimes left bare |
| Drips after fitting | Stops when sealing is correct | Returns within weeks |
| Sheet material | G90 galvanized sheet from SABIC | Sheet of unspecified grade |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Marwah is a central district combining mid-rise residential buildings with small and medium commercial units on lower floors, with fairly organised streets. Metal duct runs through false ceilings in flats and shops, and high humidity and proximity to the sea cause constant condensation on uninsulated surfaces. Glass insulation with complete vapour barrier maintains system efficiency and stops dripping on finishes and goods.
Al Marwah sits in central Jeddah's sector, comprising residential buildings and small commercial units interspersed.
Most buildings in Al Marwah use central AC with metal duct enclosed in false ceilings for flats and shops.
The AC setup in Al Marwah
- 1
Central duct in mixed residential and commercial blocks
Buildings in Al Marwah have residential units on upper floors and commercial shops below, each with metal duct systems needing complete insulation.
- 2
False ceilings at varying heights
The gap between the real and false ceiling varies in flats and shops, requiring flexibility when handling different heights and tight angles.
- 3
Complex connections around columns and walls
Duct requires flexible connections around load-bearing columns and walls, each needing proper insulation and sealing to prevent condensation.
Before the visit
Before our visit in Al Marwah
- 1
Coordinate with the shop or building owner in advance
Inform the shop owner or building management of the work time and expected impact on shop hours or flat occupants before work starts.
- 2
Confirm access to ceilings and duct spaces
Check that the team can safely access false ceilings and duct spaces, and that there is a safe place to store materials.
- 3
Prepare a ladder or safe work platform for ceiling access
Provide a fixed ladder or safe work platform for the team to access false ceilings and upper spaces, with enough room for safe movement.
More districts for Duct insulation
Other services in Al Marwah
FAQ
Questions about Duct insulation
Why does duct sweat more in Jeddah than in other places?
Jeddah combines intense heat with high humidity, especially near the coast. Cold air inside the duct chills the metal, and the warm humid air outside condenses on it immediately if there is no insulation keeping vapour away from the metal surface.
Can duct be insulated after the false ceiling is closed?
It depends on the size of existing access hatches and the duct route. In some areas the work can be done through the hatches already there; in others a section of ceiling needs to be opened. The survey decides the right approach before any work starts.
What is the difference between Armaflex, Kimmco and Foster for duct insulation?
Armaflex and Kimmco are flexible insulation materials used for wrapping duct and reducing condensation. Foster is a sealant applied to joints and connections to block vapour from passing through. We choose the right material for each part of the duct after the site survey, and may use more than one on a single project.
Do you insulate duct in commercial and industrial projects too?
Yes, we work in residential, commercial, industrial and government buildings across all Jeddah districts. Project size affects quantities and coordination with other trades, which the survey maps out. Discounts by quantity and project size apply to larger works.
Does the plenum box need different insulation from the rest of the duct?
The plenum box has a larger surface area and cools quickly in Jeddah's humid air, making it especially prone to condensation. The technician wraps it in glass-wool and seals its corners and openings with the correct vapour barrier. The sealant chosen may differ from the one used on the rest of the duct route, depending on what the survey finds.
Do you insulate duct in small commercial shops in Al Marwah?
Yes, we cover all residential and commercial buildings in Al Marwah. We insulate duct in shops and flats with glass insulation and seal joints to stop condensation that affects finishes and stock. Competitive prices.
Access to shops in Al Marwah is tight, how do you bring materials in?
We coordinate with the shop or building owner on the nearest loading point. The team carries insulation materials by hand when needed to ceilings and internal corridors.
Dripping on stock and finishes is a problem in shops, does insulation fix this?
Yes, condensation on uninsulated duct drips on stock and walls. Glass insulation with a vapour barrier stops vapour entering the duct and prevents dripping entirely.
Does the system stay efficient after insulation in Al Marwah's humid climate?
Glass insulation reduces cooling loss along the duct and maintains system efficiency. In Al Marwah's humid climate, it protects the duct and equipment from moisture and salt.


























































































