Duct insulation in Al Nuzlah Al Yamaniyah, Jeddah
In Al Nuzlah Al Yamaniyah, south Jeddah, modern residential and commercial buildings use central ductwork installed in walls and false ceilings. High coastal humidity causes sweating on bare duct, so Alrabih commits to insulating every duct with glass wool and sealing every joint with a vapour barrier to stop condensation completely.
4.9 on Google- Glass-wool wrap
- Vapour seal
- No condensation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When duct insulation becomes urgent
- 1
Damp patches on the false ceiling
Damp stains or drips under the false ceiling in summer usually mean cold duct with no proper insulation. Humid air touches the cold metal, condenses, falls onto the ceiling boards and ruins the plaster and paint.
- 2
Old, cracked or loose insulation
Insulation that has cracked, pulled away from the metal or been soaked by a past leak no longer stops vapour. Even a small gap between two sections is enough for moisture to condense on the metal and restart the dripping problem.
- 3
New duct you want fully insulated
When new air ducts are installed in a home or commercial building, insulation is part of the work, not an afterthought. We wrap the duct and seal the joints before the ceiling is closed so it never needs to be opened again for this reason.
Who it's for
Noticing damp patches on your room ceiling
We survey the duct, wrap it in glass-wool and seal every joint so condensation stops completely.
Ask on WhatsAppInstalling new duct in a commercial building
We wrap the duct in glass-wool and seal all joints before the ceiling closes, with a one-year warranty.
Ask on WhatsApp
What the job covers
What the insulation work covers
- Duct route and insulation survey
- Glass-wool wrap over duct
- Vapour-sealed joints and corners
- Plenum box and connections insulated
- Fixed with correct fasteners
How we work
How we work
- 1
Ceiling and duct survey
The technician inspects the duct route and any existing insulation, then marks the sections that need new wrapping or re-insulation before work begins.
- 2
Surface prep and strip-out
Damaged or wet insulation is stripped off and the metal surface cleaned so the new material bonds properly with no air pockets trapped beneath.
- 3
Wrap and seal
We wrap the duct in glass-wool and cover every joint, corner and connection with the correct vapour barrier, using Foster, Armaflex or Kimmco sealing materials as the site requires.
- 4
Check and handover
The technician checks the insulation along the full route, confirms the wrap is secure and joints are gap-free, then hands over the completed work with a one-year warranty and competitive prices.
Why Alrabih?
Sealed insulation or a surface cover?
| Alrabih | The usual way | |
|---|---|---|
| Vapour barrier | Sealed at every joint and corner | Left open or incomplete |
| Joins between sections | Closed with correct sealant | Tape that peels off |
| Plenum box and connections | Insulated with the rest | Sometimes left bare |
| Drips after fitting | Stops when sealing is correct | Returns within weeks |
| Sheet material | G90 galvanized sheet from SABIC | Sheet of unspecified grade |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Most Al Nuzlah Al Yamaniyah buildings are newly built to modern architectural standards with adequate space in cavity walls and false ceilings for central ductwork. The very high humidity and intense heat near the coast make duct insulation imperative to prevent water dripping on false ceilings and cooling loss over distance. Every duct joint and corner needs tight vapour-barrier sealing to stop outside air moisture entering and causing condensation again.
Al Nuzlah Al Yamaniyah is in south Jeddah, a district of modern mixed residential and commercial buildings close to the coast.
Most new residential and commercial projects in Al Nuzlah Al Yamaniyah use central ductwork installed in cavity walls and false ceilings, because architectural space is available and maintenance is straightforward.
The AC setup in Al Nuzlah Al Yamaniyah
- 1
Central duct in wall cavities and false ceilings
Modern Al Nuzlah Al Yamaniyah buildings provide cavity walls and false ceilings that support insulated central ductwork keeping cooling from the source to the outlets.
- 2
Flexible ducts connect the main duct to air outlets
Flexible duct sections from the main duct to each outlet are also insulated to ensure cold air reaches without heat loss.
- 3
Central plenum box below the false ceiling
The central plenum box that distributes cooling to different branches is mounted below the false ceiling and is fully insulated to reduce cooling loss.
Before the visit
Before our visit in Al Nuzlah Al Yamaniyah
- 1
Identify duct paths in walls and ceilings
Before the visit, provide an architectural drawing or sketch showing the main duct path, branches and flexible sections.
- 2
Ensure the team can reach the duct
The false ceiling may already be closed, so ensure there are safe access points or openings for the team to reach the duct and joints if needed.
- 3
Coordinate with the contractor and architectural supervision
For new projects under construction, coordinate with the contractor and supervision to ensure installation timing aligns with the electrical and mechanical schedule.
More districts for Duct insulation
Other services in Al Nuzlah Al Yamaniyah
FAQ
Questions about Duct insulation
Why does duct sweat more in Jeddah than in other places?
Jeddah combines intense heat with high humidity, especially near the coast. Cold air inside the duct chills the metal, and the warm humid air outside condenses on it immediately if there is no insulation keeping vapour away from the metal surface.
Can duct be insulated after the false ceiling is closed?
It depends on the size of existing access hatches and the duct route. In some areas the work can be done through the hatches already there; in others a section of ceiling needs to be opened. The survey decides the right approach before any work starts.
What is the difference between Armaflex, Kimmco and Foster for duct insulation?
Armaflex and Kimmco are flexible insulation materials used for wrapping duct and reducing condensation. Foster is a sealant applied to joints and connections to block vapour from passing through. We choose the right material for each part of the duct after the site survey, and may use more than one on a single project.
Do you insulate duct in commercial and industrial projects too?
Yes, we work in residential, commercial, industrial and government buildings across all Jeddah districts. Project size affects quantities and coordination with other trades, which the survey maps out. Discounts by quantity and project size apply to larger works.
Does the plenum box need different insulation from the rest of the duct?
The plenum box has a larger surface area and cools quickly in Jeddah's humid air, making it especially prone to condensation. The technician wraps it in glass-wool and seals its corners and openings with the correct vapour barrier. The sealant chosen may differ from the one used on the rest of the duct route, depending on what the survey finds.
Duct in the cavity wall sweats quickly, how do you protect it?
We insulate the duct with glass wool and seal every joint with a vapour barrier so outside moisture from the building's outer wall cannot reach the duct and cause condensation.
Does the vapour barrier affect drainage from the condensate line?
No, the insulation and barrier wrap only the main duct. The copper drain and suction lines are insulated separately and have a clear path for maintenance.
The false ceilings in Al Nuzlah Al Yamaniyah are sometimes thin, does the insulation take up a lot of space?
Glass wool is wrapped around the outside of the duct and takes up very little space. We coordinate with architects before installation to make sure the dimensions fit the false ceiling.
Do the false ceilings need special treatment after insulation is fitted?
No, the insulation does not affect the ceiling itself. After installation, we confirm there are no leaks or moisture points before the ceiling is closed.


























































































