Duct insulation in Al Ruwais, Jeddah
In Al Ruwais, central Jeddah, insulated duct installation protects the residential and commercial buildings from water dripping onto false ceilings. Alrabih's team wraps glass-wool insulation around the galvanized air ducts and seals every joint with a proper vapour barrier to stop condensation.
4.9 on Google- Glass-wool wrap
- Vapour seal
- No condensation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When duct insulation becomes urgent
- 1
Damp patches on the false ceiling
Damp stains or drips under the false ceiling in summer usually mean cold duct with no proper insulation. Humid air touches the cold metal, condenses, falls onto the ceiling boards and ruins the plaster and paint.
- 2
Old, cracked or loose insulation
Insulation that has cracked, pulled away from the metal or been soaked by a past leak no longer stops vapour. Even a small gap between two sections is enough for moisture to condense on the metal and restart the dripping problem.
- 3
New duct you want fully insulated
When new air ducts are installed in a home or commercial building, insulation is part of the work, not an afterthought. We wrap the duct and seal the joints before the ceiling is closed so it never needs to be opened again for this reason.
Who it's for
Noticing damp patches on your room ceiling
We survey the duct, wrap it in glass-wool and seal every joint so condensation stops completely.
Ask on WhatsAppInstalling new duct in a commercial building
We wrap the duct in glass-wool and seal all joints before the ceiling closes, with a one-year warranty.
Ask on WhatsApp
What the job covers
What the insulation work covers
- Duct route and insulation survey
- Glass-wool wrap over duct
- Vapour-sealed joints and corners
- Plenum box and connections insulated
- Fixed with correct fasteners
How we work
How we work
- 1
Ceiling and duct survey
The technician inspects the duct route and any existing insulation, then marks the sections that need new wrapping or re-insulation before work begins.
- 2
Surface prep and strip-out
Damaged or wet insulation is stripped off and the metal surface cleaned so the new material bonds properly with no air pockets trapped beneath.
- 3
Wrap and seal
We wrap the duct in glass-wool and cover every joint, corner and connection with the correct vapour barrier, using Foster, Armaflex or Kimmco sealing materials as the site requires.
- 4
Check and handover
The technician checks the insulation along the full route, confirms the wrap is secure and joints are gap-free, then hands over the completed work with a one-year warranty and competitive prices.
Why Alrabih?
Sealed insulation or a surface cover?
| Alrabih | The usual way | |
|---|---|---|
| Vapour barrier | Sealed at every joint and corner | Left open or incomplete |
| Joins between sections | Closed with correct sealant | Tape that peels off |
| Plenum box and connections | Insulated with the rest | Sometimes left bare |
| Drips after fitting | Stops when sealing is correct | Returns within weeks |
| Sheet material | G90 galvanized sheet from SABIC | Sheet of unspecified grade |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Ruwais mixes established residential buildings with modern commercial structures, many fitted with central AC systems where ducts pass through false ceilings. Jeddah's coastal humidity means uninsulated duct constantly sweats, causing drips that stain the plasterboard and finishes below. Glass insulation with proper vapour-sealed joints keeps the ceiling void dry and ensures cold air reaches the outlets without cooling loss en route.
Al Ruwais is in central Jeddah, a mixed district of residential and commercial buildings where false ceilings are common in shops and offices.
Most central AC systems in Al Ruwais run ductwork through false ceilings, which requires effective insulation to prevent leaks onto the plasterboard and floors below.
The AC setup in Al Ruwais
- 1
Central duct in false ceiling in commercial buildings
Most shops and offices in Al Ruwais have false ceilings that hide the ductwork, requiring tight insulation to prevent moisture from dripping onto the plasterboard.
- 2
Insulated copper pipes running alongside ducts
Copper refrigerant lines often run the same path and also need heat insulation to prevent cooling loss through the walls.
- 3
Flexible ducts and dampers in false ceiling spaces
Flexible ducts and control dampers are fitted in the void between the structural and false ceilings, and need separate insulation for easier maintenance later.
Before the visit
Before our visit in Al Ruwais
- 1
Confirm access to the false ceiling
Check that the team can safely reach the false ceiling and the void above it before installation day, either through an existing hatch or by removing panels temporarily.
- 2
Provide space for the team and materials at the installation site
Keep the installation area clear of furniture and obstacles, and provide nearby space to unload the glass insulation and other materials.
- 3
Coordinate with the building management or site owner
Tell the management about the installation date and that the central AC will be off during insulation fitting, and agree on working times that do not disrupt business.
More districts for Duct insulation
Other services in Al Ruwais
FAQ
Questions about Duct insulation
Why does duct sweat more in Jeddah than in other places?
Jeddah combines intense heat with high humidity, especially near the coast. Cold air inside the duct chills the metal, and the warm humid air outside condenses on it immediately if there is no insulation keeping vapour away from the metal surface.
Can duct be insulated after the false ceiling is closed?
It depends on the size of existing access hatches and the duct route. In some areas the work can be done through the hatches already there; in others a section of ceiling needs to be opened. The survey decides the right approach before any work starts.
What is the difference between Armaflex, Kimmco and Foster for duct insulation?
Armaflex and Kimmco are flexible insulation materials used for wrapping duct and reducing condensation. Foster is a sealant applied to joints and connections to block vapour from passing through. We choose the right material for each part of the duct after the site survey, and may use more than one on a single project.
Do you insulate duct in commercial and industrial projects too?
Yes, we work in residential, commercial, industrial and government buildings across all Jeddah districts. Project size affects quantities and coordination with other trades, which the survey maps out. Discounts by quantity and project size apply to larger works.
Does the plenum box need different insulation from the rest of the duct?
The plenum box has a larger surface area and cools quickly in Jeddah's humid air, making it especially prone to condensation. The technician wraps it in glass-wool and seals its corners and openings with the correct vapour barrier. The sealant chosen may differ from the one used on the rest of the duct route, depending on what the survey finds.
What insulation suits ductwork in Al Ruwais's commercial buildings?
We wrap glass-wool insulation around the galvanized duct with a tight vapour barrier, which stops condensation on the false ceilings in shops and offices.
Al Ruwais streets are moderately narrow, how do you bring materials to the site?
We agree on an unloading point near the site and carry materials and tools by hand through the entrance to the installation area as needed.
Does Jeddah's coastal humidity affect the glass-wool insulation quality?
High humidity makes insulation and the vapour barrier critical to prevent condensation, so we choose humidity-resistant materials and seal every joint carefully.
How do we ensure the insulated duct keeps the cooling all the way to the last outlet?
Glass insulation reduces cooling loss through the duct walls, and correct design of the joints and runs ensures even distribution of cold air to each outlet.


























































































