Government building HVAC in Al Asaliyah, Jeddah
In Al Asaliyah, south Jeddah, government buildings need central AC that runs uninterrupted as staff and visitors move through daily. Alrabih's team follows the consultant's drawings and coordinates with the project supervisor to keep operations running during installation.
4.9 on Google- To the drawings
- No work-hour stops
- Regular maintenance
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When a government building needs our team
- 1
A new project with consultant specs
You have drawings, a bill of quantities and technical specifications from the consultant, and need a contractor who builds to them without improvising outside the contract. We match every item in the spec document before handover.
- 2
Expansion or upgrade beside working staff
Offices are in daily use and you need new ductwork or unit replacements. We work out a schedule with the supervisor that keeps noise and dust away from the working areas throughout office hours.
- 3
An existing facility needing a maintenance contract
The building is occupied and the HVAC needs regular care to stay effective in Jeddah's heat and salty air. We offer preventive and corrective maintenance contracts for government facilities, whether newly installed or already in service.
Who it's for
Overseeing HVAC installation in a new government building
We review the consultant's drawings with you, coordinate with the site supervisor, and build to every item in the specification document.
Ask on WhatsAppYour occupied building needs a regular maintenance contract
We provide preventive and corrective maintenance contracts that keep the HVAC performing in Jeddah's heat and salty air.
Ask on WhatsApp
What the job covers
What the work covers
- G90 galvanised ductwork
- dampers and plenum boxes
- flexible duct and outlets
- Armaflex-insulated copper pipework
- start-up and maintenance contracts
How we work
How we work
- 1
Review drawings and quantities
We receive the consultant's drawings and bill of quantities, review them with our technical team and flag any conflict between the drawing and the site before work starts.
- 2
Schedule around office hours
We agree the work phases and timing with the project supervisor; noisy or access-blocking tasks are done outside official office hours so occupied areas are not disrupted.
- 3
Installation and testing
We fabricate ductwork in our workshop then install, insulate and test air balance on site, checking every thermostat and damper performs as the specification requires.
- 4
Start-up and handover
We start the system up and confirm it runs as designed, and brief the building's operations team on its controls before we leave the site.
Why Alrabih?
Built to spec or built by guesswork?
| Alrabih | The usual way | |
|---|---|---|
| Drawings | Every item matched before handover | Site changes by guesswork |
| Office hours | Disruptive work outside hours | Constant disruption to staff |
| Handover | Full start-up before we leave | Handover without a full start-up |
| After-care | Preventive and corrective contract | Contact only when it breaks |
| Duct fabrication | Our workshop, exact spec dimensions | Off-shelf stock may not match |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Asaliyah buildings blend government departments and service centres receiving steady visitor flows, requiring complex central AC systems with ducts, dampers and thermostats to control temperature precisely across different sections. The modern construction and open spaces in this area allow duct runs and flexible connections to be laid without constraint, but coordinating the work while keeping administrative operations going calls for tight scheduling and handing over complete documentation when finished.
Al Asaliyah lies in modern south Jeddah, a mixed district of government and service buildings alongside residential structures with relatively open spaces.
Most government buildings here use central chiller units with ducted systems that distribute cooled air through outlets across different departments.
The AC setup in Al Asaliyah
- 1
Central chiller with distributed duct network
Modern government buildings in Al Asaliyah install a single central chiller connected to a main duct that splits into smaller branches reaching each administrative section.
- 2
Plenum box and precisely located outlets
The plenum box is mounted in a plant room or on the roof, and air outlets distribute across ceilings or walls to deliver cooled air evenly according to design.
- 3
Flexible ducts and glass-wool insulation for efficiency
Flexible ducts connect the main duct to room branches, and glass-wool insulation wraps the duct to cut cooling loss and noise as air flows through.
Before the visit
Before our visit in Al Asaliyah
- 1
Confirm access to the plant room
Identify where the plant room or roof is for the chiller installation, and confirm our team can reach it safely with equipment.
- 2
Coordinate with the project supervisor on the installation schedule
Inform the project supervisor of planned installation phases so he can coordinate other work and direct staff about areas under construction.
- 3
Prepare the consultant's drawings and specifications
Gather a clear copy of the design drawings and technical specifications for ducts, outlets and thermostats, and hand them to our team before installation begins.
More districts for Government building HVAC
Other services in Al Asaliyah
FAQ
Questions about Government building HVAC
How do you handle gaps between the drawings and the actual site?
Before installation we visit the site and compare it against the drawings. Any conflict is put to the supervisor or consultant for a formal direction before we proceed. We do not alter the design on our own initiative, as that affects air balance and the work of other contractors on the project.
Do you fabricate the ductwork yourselves or buy it ready-made?
We make both round and rectangular duct in our own workshop from G90 galvanized sheet to SMACNA standards, or from aluminium sheet when the specification calls for it. This lets us control the dimensions and thickness listed in the bill of quantities without depending on off-the-shelf stock that may not match.
How do you keep office air quality acceptable during installation?
Dust from sheet cutting and wall penetrations builds up quickly in air-conditioned buildings. We seal off the work zone with temporary barriers, close the duct sections connected to it during cutting, and clean the inside of the installed ductwork before connecting it to the AC units and starting the system.
What happens when the installation is finished?
We start the system and check with the supervisor that every damper, thermostat and air outlet works as the specification requires, then show the building's operations team how to control it. After that we offer a preventive and corrective maintenance contract that keeps the system performing in Jeddah's heat and salty air.
Does HVAC installation in an occupied building differ from an empty one?
Yes, significantly. In an occupied building we divide the work into phases, isolate each work zone from neighbouring offices, and defer noisy or penetration work to outside office hours. The site determines the best sequence, and this is agreed with the project supervisor before work begins.
Do you install central AC in government buildings while they are still operating?
Yes, we coordinate with the project supervisor to phase the work so other departments remain unaffected. We install ducts, flexible connections and air outlets on a schedule that allows staff and visitors to move through.
Government buildings need complete handover documents, what do you provide?
Before we leave, we hand over a file with as-built drawings of every installation element, measurement and test data, and a signed commissioning report from the project supervisor.
High humidity and salty air in south Jeddah, do they affect AC materials?
We use corrosion-resistant materials in pipes and connections, and we clean air outlets and ducts of salt and excess moisture before final commissioning.
How do you handle dampers and thermostats in a complex government building?
We install dampers in main duct runs to balance airflow between departments, and program thermostats for different zones so each section can control its temperature to suit its needs.


























































































