Government building HVAC in Radwa, Jeddah
In Radwa, north-east Jeddah, government building HVAC requires close coordination because the work must fit around staff and public needs. Alrabih's team follows the consultant's drawings and executes installation and maintenance to the agreed schedule with the site supervisor, handing over full documentation on completion.
4.9 on Google- To the drawings
- No work-hour stops
- Regular maintenance
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When a government building needs our team
- 1
A new project with consultant specs
You have drawings, a bill of quantities and technical specifications from the consultant, and need a contractor who builds to them without improvising outside the contract. We match every item in the spec document before handover.
- 2
Expansion or upgrade beside working staff
Offices are in daily use and you need new ductwork or unit replacements. We work out a schedule with the supervisor that keeps noise and dust away from the working areas throughout office hours.
- 3
An existing facility needing a maintenance contract
The building is occupied and the HVAC needs regular care to stay effective in Jeddah's heat and salty air. We offer preventive and corrective maintenance contracts for government facilities, whether newly installed or already in service.
Who it's for
Overseeing HVAC installation in a new government building
We review the consultant's drawings with you, coordinate with the site supervisor, and build to every item in the specification document.
Ask on WhatsAppYour occupied building needs a regular maintenance contract
We provide preventive and corrective maintenance contracts that keep the HVAC performing in Jeddah's heat and salty air.
Ask on WhatsApp
What the job covers
What the work covers
- G90 galvanised ductwork
- dampers and plenum boxes
- flexible duct and outlets
- Armaflex-insulated copper pipework
- start-up and maintenance contracts
How we work
How we work
- 1
Review drawings and quantities
We receive the consultant's drawings and bill of quantities, review them with our technical team and flag any conflict between the drawing and the site before work starts.
- 2
Schedule around office hours
We agree the work phases and timing with the project supervisor; noisy or access-blocking tasks are done outside official office hours so occupied areas are not disrupted.
- 3
Installation and testing
We fabricate ductwork in our workshop then install, insulate and test air balance on site, checking every thermostat and damper performs as the specification requires.
- 4
Start-up and handover
We start the system up and confirm it runs as designed, and brief the building's operations team on its controls before we leave the site.
Why Alrabih?
Built to spec or built by guesswork?
| Alrabih | The usual way | |
|---|---|---|
| Drawings | Every item matched before handover | Site changes by guesswork |
| Office hours | Disruptive work outside hours | Constant disruption to staff |
| Handover | Full start-up before we leave | Handover without a full start-up |
| After-care | Preventive and corrective contract | Contact only when it breaks |
| Duct fabrication | Our workshop, exact spec dimensions | Off-shelf stock may not match |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Radwa's buildings include government administrative and service facilities with open spaces and wide roads that ease team access and equipment movement. These buildings need reliable central AC systems serving administrative wings and reception halls with precise temperature control, and the work must align with government working hours without disrupting daily operations.
Radwa lies in north-east Jeddah, an area of modern government and administrative buildings with wide outdoor spaces.
Central AC systems in the government buildings here typically rely on main plenums and ducting distributed from lower floors to upper storeys.
The AC setup in Radwa
- 1
Central system with a main plenum and distributed branches
The administrative buildings in the area need AC systems covering multiple wings, so we install a main plenum on the ground or lower floor with distributed ducts for each storey.
- 2
Air outlets in ceilings and interior walls
Air outlets are evenly distributed in the suspended ceilings of the administrative wings, with outlets in partition walls between rooms for even distribution.
- 3
Central thermostat with distributed sensors
The system uses a central thermostat with temperature sensors in each wing to ensure precise temperature control across different work areas.
Before the visit
Before our visit in Radwa
- 1
Request floor plans and specified locations from management
Obtain building plans and approval of plenum location, duct routes and outlet positions from the consultant and management before the visit.
- 2
Coordinate the work schedule with the supervisor and management
Choose a day and time that allows work without disrupting services, and inform building management of the visit date and expected work duration.
- 3
Ensure space is available for equipment and materials on site
Check that a secure space is available on site for storing equipment and materials temporarily, and that there is adequate access to move pipes, ducts and tools.
More districts for Government building HVAC
Other services in Radwa
FAQ
Questions about Government building HVAC
How do you handle gaps between the drawings and the actual site?
Before installation we visit the site and compare it against the drawings. Any conflict is put to the supervisor or consultant for a formal direction before we proceed. We do not alter the design on our own initiative, as that affects air balance and the work of other contractors on the project.
Do you fabricate the ductwork yourselves or buy it ready-made?
We make both round and rectangular duct in our own workshop from G90 galvanized sheet to SMACNA standards, or from aluminium sheet when the specification calls for it. This lets us control the dimensions and thickness listed in the bill of quantities without depending on off-the-shelf stock that may not match.
How do you keep office air quality acceptable during installation?
Dust from sheet cutting and wall penetrations builds up quickly in air-conditioned buildings. We seal off the work zone with temporary barriers, close the duct sections connected to it during cutting, and clean the inside of the installed ductwork before connecting it to the AC units and starting the system.
What happens when the installation is finished?
We start the system and check with the supervisor that every damper, thermostat and air outlet works as the specification requires, then show the building's operations team how to control it. After that we offer a preventive and corrective maintenance contract that keeps the system performing in Jeddah's heat and salty air.
Does HVAC installation in an occupied building differ from an empty one?
Yes, significantly. In an occupied building we divide the work into phases, isolate each work zone from neighbouring offices, and defer noisy or penetration work to outside office hours. The site determines the best sequence, and this is agreed with the project supervisor before work begins.
How do you ensure administrative work is not disrupted during installation?
We coordinate the work schedule with the project supervisor and the building management in advance, and carry out installation in phases that allow parts of the system to operate while work continues in other areas.
Government buildings require full documentation, what do you hand over?
We hand over as-built drawings, test reports, and recommended maintenance schedules, along with all documentation required by the consultant and project supervisor.
Radwa is very hot with dust, does this affect the ductwork?
The heat and dust in north-east Jeddah increase the system load, so we clean filters regularly and test air delivery after installation to ensure optimal performance.
How do you handle the dampers and flexible ducts in the central system?
We install dampers on the main plenum and branches to control air distribution between wings, use flexible ducts where flexibility is needed, and test every connection before handover.


























































































