HVAC controls and automation in Al Ammariyah, Jeddah

In Al Ammariyah in south Jeddah, large warehouses and commercial blocks house many staff and visitors. Alrabih's team divides these expansive spaces into separate control zones by department or floor, so each zone runs according to its actual cooling demand.

4.9 on Google
  • Zone control
  • Accurate wiring
  • Automatic operation

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

Who needs these systems?

  1. 1

    Villa or office with multiple zones

    Bedrooms, reception rooms and offices have different hours of use. When each thermostat controls one zone, an empty room does not cool while an occupied one goes without; the survey decides the number of zones and what wiring the building needs.

  2. 2

    A facility too large to run by hand

    In warehouses, government buildings and commercial complexes, one operator cannot follow every unit. We connect the plant to a central point where the operator sees the status of each zone and intervenes without walking the building.

  3. 3

    A system that runs irregularly

    A unit left running after a room is vacated, or one that never stops at peak hours, is usually a controls problem rather than a fault in the unit. We inspect the control circuit and build on it a system suited to how the building is used.

Who it's for

  • Living in a villa with areas on different schedules

    We fit a thermostat for each zone and wire it to its unit so bedrooms run independently from the reception area.

    Ask on WhatsApp
  • Managing a large facility that is hard to monitor manually

    We connect units to a central control point so the operator sees every zone's status without walking the building.

    Ask on WhatsApp

What the job covers

What the work covers

  • Site survey and zoning
  • Control wiring beside ducts
  • Thermostat in each zone
  • Units linked to central point
  • Automatic operation tested per zone
Request a quote

How we work

How we work

  1. 1

    Survey the building

    We agree with you on zone boundaries, thermostat positions and the cable route before any work starts; the survey sets the real requirements based on building size and unit types.

  2. 2

    Run the control cables

    We route control cables neatly beside the ductwork and copper piping, keeping them away from power cables to avoid signal interference.

  3. 3

    Fit thermostats and connect

    We fix each thermostat in its agreed position, wire it to its unit, connect all units to the central control point and verify every circuit before testing.

  4. 4

    Start up and hand over

    We start each zone separately and check that each thermostat responds correctly, then show you how to monitor and adjust the zones from the central control point.

Start with step one

Why Alrabih?

Automatic control or manual switches?

AlrabihThe usual way
On and offAutomatic by temperatureManual switch
ZonesEach zone independentWhole building together
Operator viewCentral control pointWalk to every unit
Unit left runningStops automaticallyRuns until someone notices
Scheduled operationBy actual occupancyFixed time always
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

This district has wide, deep commercial buildings, often with office space on upper floors and storage or workshops below. Industrial dust and humidity from the southern sector raise cooling loads unevenly across zones, so smart zoning optimises operation based on actual demand in each section.

Al Ammariyah in south Jeddah is a district of large commercial and industrial blocks with office areas.

Most commercial buildings here are deep and sprawling, meaning remote zones may need stronger or lighter cooling depending on the work done there.

The AC setup in Al Ammariyah

  1. 1

    Division by functional departments

    Goods storage, offices and workshops have different cooling needs, so each gets its own thermostat controlling the temperature of its air outlets.

  2. 2

    Horizontal zones by floor and wing

    Large deep buildings span multiple wings, so we create horizontal zones where each serves a complete wing or floor.

  3. 3

    Central monitoring with local control per zone

    The property manager can monitor all zones from one point while each section manager keeps local control to match work demands.

Before the visit

Before our visit in Al Ammariyah

  1. 1

    Provide the building plan with departments and floors

    Send the building plan showing department distribution, floors and elevations so we can locate the best thermostat points and wire routes.

  2. 2

    Agree thermostat locations in each zone

    Confirm with section managers where each thermostat will mount in their area (away from heat sources and open doors) before starting.

  3. 3

    Check access to the electrical switchroom

    Confirm our team can safely reach the main switchroom where thermostat wires will terminate without obstruction.

FAQ

Questions about HVAC controls and automation

Does building automation suit a residential villa?

Yes, and a Jeddah villa benefits particularly because it has several zones with different use patterns between day and night. We fit a thermostat for each zone and link the units so bedrooms run independently from the reception and the kitchen. The survey sets the number of circuits needed.

How do control cables run in a finished building?

In a finished building we run cables in trunking alongside the ductwork and copper piping. Where the duct is above a suspended ceiling the route is straightforward. The survey finds the best path for each building before any cable is pulled.

Can air dampers work with the thermostats?

Yes, a motorised damper receives a signal from the thermostat, opens when the zone needs cooling and closes when the set temperature is reached. This makes zoning more precise where one duct serves several areas, and the survey sets the correct position for each damper.

Does Jeddah's humidity affect control wiring?

Jeddah's humid coastal air makes it important to use cables with a suitable outer sheath and to seal all connections firmly against oxidation, especially where routes pass near outdoor units. We account for this in how we plan the route, fix the cables and test every circuit before handover.

Can each zone be set to start and stop at set times?

Yes, a thermostat that supports scheduling allows you to set start and stop times for each zone separately. This is particularly useful in offices and facilities with fixed working hours. The survey determines the right thermostat type for each zone based on the unit type and wiring method.

Can a large warehouse be split into separate control zones?

Yes, we group air outlets by warehouse section and connect each to its own thermostat, so each zone maintains the right temperature for its goods or equipment.

Industrial dust in south Jeddah may clog duct filters, does zoning help?

Zoning lets you adjust air speed in dustier zones, reducing filter load and extending filter life.

Upper-floor offices may differ from ground workshops, how do we manage the difference?

We separate control between floors so each senses its own temperature, letting office and workshop units run at different speeds to match their needs.

How do we protect thermostat wires from dust or humidity damage?

We run wires in insulated conduits hidden within walls or ceilings, and use moisture and dust-resistant connectors at all termination points.

The Jeddah corniche in cool weather

Start with a site survey

WhatsApp us a brief description of the building and how many zones you need, or call us, and we will arrange a survey visit Saturday to Thursday.

CallWhatsApp