HVAC controls and automation in Al Buddur, Jeddah

In Al Buddur, east Jeddah's sprawling residential and commercial projects need precise control over cool air distribution. Alrabih installs thermostats in each zone and wires them to run the AC automatically to the target temperature.

4.9 on Google
  • Zone control
  • Accurate wiring
  • Automatic operation

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

Who needs these systems?

  1. 1

    Villa or office with multiple zones

    Bedrooms, reception rooms and offices have different hours of use. When each thermostat controls one zone, an empty room does not cool while an occupied one goes without; the survey decides the number of zones and what wiring the building needs.

  2. 2

    A facility too large to run by hand

    In warehouses, government buildings and commercial complexes, one operator cannot follow every unit. We connect the plant to a central point where the operator sees the status of each zone and intervenes without walking the building.

  3. 3

    A system that runs irregularly

    A unit left running after a room is vacated, or one that never stops at peak hours, is usually a controls problem rather than a fault in the unit. We inspect the control circuit and build on it a system suited to how the building is used.

Who it's for

  • Living in a villa with areas on different schedules

    We fit a thermostat for each zone and wire it to its unit so bedrooms run independently from the reception area.

    Ask on WhatsApp
  • Managing a large facility that is hard to monitor manually

    We connect units to a central control point so the operator sees every zone's status without walking the building.

    Ask on WhatsApp

What the job covers

What the work covers

  • Site survey and zoning
  • Control wiring beside ducts
  • Thermostat in each zone
  • Units linked to central point
  • Automatic operation tested per zone
Request a quote

How we work

How we work

  1. 1

    Survey the building

    We agree with you on zone boundaries, thermostat positions and the cable route before any work starts; the survey sets the real requirements based on building size and unit types.

  2. 2

    Run the control cables

    We route control cables neatly beside the ductwork and copper piping, keeping them away from power cables to avoid signal interference.

  3. 3

    Fit thermostats and connect

    We fix each thermostat in its agreed position, wire it to its unit, connect all units to the central control point and verify every circuit before testing.

  4. 4

    Start up and hand over

    We start each zone separately and check that each thermostat responds correctly, then show you how to monitor and adjust the zones from the central control point.

Start with step one

Why Alrabih?

Automatic control or manual switches?

AlrabihThe usual way
On and offAutomatic by temperatureManual switch
ZonesEach zone independentWhole building together
Operator viewCentral control pointWalk to every unit
Unit left runningStops automaticallyRuns until someone notices
Scheduled operationBy actual occupancyFixed time always
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

Al Buddur is a relatively newer residential and commercial expansion with dispersed buildings and wide streets, allowing duct and electrical runs more freely than older districts. The buildings here are taller and larger, containing multiple rooms and sections with different uses that each need independent temperature control. Dividing the building into zones with a separate thermostat per zone prevents energy waste and keeps comfort consistent throughout.

Al Buddur lies in east Jeddah, an area of newer, dispersed buildings with wide streets and available outdoor space.

Central AC systems in Al Buddur typically use a plenum box and dampers to direct air to separate zones, and this setup benefits greatly from automatic control.

The AC setup in Al Buddur

  1. 1

    Central plenum box with separate dampers

    Large Al Buddur buildings use one central plenum box distributed to multiple branches, each with a separate damper controlled by its own thermostat.

  2. 2

    Thermostats in key zones

    Thermostats are placed in areas exposed to direct sun or heavy use so they read the real need of each zone accurately.

  3. 3

    Flexible ducts for air routing

    Flexible ducts between the main run and the outlets make installation simpler in newer buildings and allow route changes if the layout changes later.

Before the visit

Before our visit in Al Buddur

  1. 1

    Bring the building plan and room uses

    Give our team a sketch of the building showing the rooms, sections and intended use for each before we visit.

  2. 2

    Complete the indoor and outdoor units first

    Make sure the indoor units and outdoor sections are installed and running before we come to set up the control system.

  3. 3

    Ensure access to duct and roofs

    Check that our team can easily access the ducts, roofs and exterior areas where we will run the wires and install the dampers.

FAQ

Questions about HVAC controls and automation

Does building automation suit a residential villa?

Yes, and a Jeddah villa benefits particularly because it has several zones with different use patterns between day and night. We fit a thermostat for each zone and link the units so bedrooms run independently from the reception and the kitchen. The survey sets the number of circuits needed.

How do control cables run in a finished building?

In a finished building we run cables in trunking alongside the ductwork and copper piping. Where the duct is above a suspended ceiling the route is straightforward. The survey finds the best path for each building before any cable is pulled.

Can air dampers work with the thermostats?

Yes, a motorised damper receives a signal from the thermostat, opens when the zone needs cooling and closes when the set temperature is reached. This makes zoning more precise where one duct serves several areas, and the survey sets the correct position for each damper.

Does Jeddah's humidity affect control wiring?

Jeddah's humid coastal air makes it important to use cables with a suitable outer sheath and to seal all connections firmly against oxidation, especially where routes pass near outdoor units. We account for this in how we plan the route, fix the cables and test every circuit before handover.

Can each zone be set to start and stop at set times?

Yes, a thermostat that supports scheduling allows you to set start and stop times for each zone separately. This is particularly useful in offices and facilities with fixed working hours. The survey determines the right thermostat type for each zone based on the unit type and wiring method.

How do you divide the building into control zones?

We review the building layout and use, place a thermostat in each area that needs independent control, and wire them to the dampers in the duct so air flow opens or closes for each zone as needed.

Do Al Buddur's wide streets help with running the wires and duct?

Yes, the space between buildings and easier access to roofs and exterior areas makes installation faster and cleaner, and we can mount the outdoor units with more freedom.

Does the intense heat and humidity affect the wires and thermostats?

The wires and thermostats are designed for coastal climate conditions, but we mount them in spots shielded from direct sun and heavy moisture where possible.

Does automatic control need regular checks?

Our team tests the thermostats and control when we start up the system, and you can monitor performance yourself by observing how the AC responds when you adjust the target temperature.

The Jeddah corniche in cool weather

Start with a site survey

WhatsApp us a brief description of the building and how many zones you need, or call us, and we will arrange a survey visit Saturday to Thursday.

CallWhatsApp