Mall & retail HVAC in Al Aqeeq, Jeddah

Retail HVAC in Al Aqeeq faces severe thermal stress from its northern location and heat reflection off metal surfaces. Alrabih instals high-performance systems and cleans them regularly to maintain stable temperature and humidity.

4.9 on Google
  • Separate tenants
  • Rooftop packaged
  • Off-hours service

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When you need a retail HVAC specialist

  1. 1

    A new mall or shopping centre

    A poor design from the start means cold zones next to stifling ones and endless tenant complaints. We study the heat load of each zone separately and choose the right unit type before the ceiling is built.

  2. 2

    An existing shop with uneven cooling

    The back of the shop is cold while the front near the door stays hot at peak hours. The cause is usually the air outlet layout or the unit size; a site survey identifies which and fixes the problem without replacing the whole system.

  3. 3

    Condensate dripping on shelves or display

    A single drip on stock or a glass display front damages the product and the shop's image. The cause is usually weak insulation, a blocked condensate line or an unlevel unit, all of which can be diagnosed and fixed in one visit.

Who it's for

  • Opening a new shop inside a mall

    We design an independent unit for your space and install ductwork and condensate lines before finishing work so your opening is not delayed.

    Ask on WhatsApp
  • Managing an existing commercial complex

    We review the existing system and set a preventive and corrective maintenance contract scheduled outside trading hours so tenants are not affected.

    Ask on WhatsApp

What the job covers

What our mall and retail work covers

  • Heat load study per zone
  • Rooftop packaged unit installation
  • Independent units per tenant
  • Ductwork from our workshop
  • Maintenance contracts off peak
Request a quote

How we work

How we work

  1. 1

    Site survey and loads

    We visit the site and map every heat source: entrances, lighting, expected crowd density and facade orientation, then size the units correctly for each section.

  2. 2

    Design and materials

    We design the duct network in our own workshop from G90 galvanised sheet to dimensions that give even air distribution, and select units from brands we distribute such as Carrier, YORK and Gree.

  3. 3

    Installation coordinated on site

    We coordinate installation with the project programme so ductwork does not delay finishing trades, and supply copper runs of up to 30 metres without welded joints.

  4. 4

    Start-up and maintenance contract

    We start up the system and check air distribution in every section, then set a preventive and corrective maintenance schedule timed so work never overlaps with the shop's trading hours.

Start with step one

Why Alrabih?

Designed for the space or just fitted?

AlrabihThe usual way
Air distributionLoad study per zoneOne unit for the whole space
DuctworkG90 sheet, sized for the jobOff-the-shelf wrong size
CondensateDedicated line away from stockRisk of drips on shelves
MaintenanceScheduled outside shop hoursSurprise outage during trade
Copper runsUp to 30 m, weld-freeUnspecified pipe source
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

Al Aqeeq is a modern northern district hosting large malls and contemporary shopping districts with reflective metal surfaces and cladding everywhere. Heat reflection amplifies the stress on cooling significantly, especially in summer, and cold air loss through open doors is rapid. High-capacity central systems with extra compressor banks are necessary, and regular filter and duct cleaning is not optional.

Al Aqeeq lies in northern Jeddah, a district of large modern malls with contemporary architecture and highly reflective metal surfaces.

Systems here are high-capacity with large outdoor units and additional compressors, because reflected heat significantly increases the actual cooling load.

The AC setup in Al Aqeeq

  1. 1

    High-capacity central system with multiple compressors

    The system uses multiple compressors working together, with the ability to run one or more based on thermal load.

  2. 2

    Large outdoor units with enhanced ventilation

    Large outdoor units positioned with ample ventilation space around them to minimize absorption of reflected heat.

  3. 3

    Isolated cooling ducts for sensitive zones

    Distribution ducts are thickly insulated in high-heat zones to minimise cold loss during distribution.

Before the visit

Before our visit in Al Aqeeq

  1. 1

    Map all outdoor unit locations and main ducts

    Request a complete map showing outdoor unit locations, surrounding roofscape, and all main and branch ducts.

  2. 2

    Ensure safe access to the roof

    Confirm the roof is safe for team movement and extended work, and that heat levels do not pose occupational hazard.

  3. 3

    Schedule preventive maintenance cycles

    Establish a regular preventive maintenance cycle at regular intervals, with emergency response available if issues arise.

FAQ

Questions about Mall & retail HVAC

How do you handle doors that open onto the street all day?

An open door pushes in hot humid air and spikes the heat load suddenly. We include that load in the design and direct a supply outlet above the entrance to form an air barrier that reduces mixing. The survey confirms which arrangement suits each specific doorway.

Do you install separate units for each mall tenant?

Yes. A separate unit per tenant means each shop controls its own cooling and a fault in one unit does not affect the neighbour. It also makes consumption readings straightforward and makes maintenance responsibility clear for each party.

Why do you prefer rooftop packaged units for malls?

A rooftop packaged unit keeps the condenser and evaporator in one casing above the roof, freeing every inch of shop floor from outdoor units and shortening the duct run. Maintenance happens on the roof without entering the shop, which fits scheduling work outside trading hours.

How do you handle Jeddah's heat and its effect on rooftop units?

Rooftop units in Jeddah work in hot, salty and dusty air that strains the condenser and speeds fin corrosion. We specify units with corrosion-resistant coatings and include coil cleaning and compressor and condenser checks in the preventive schedule of every maintenance contract.

Does air distribution design differ between a small shop and a large mall?

The site survey decides. A small shop may need only a concealed unit with directional grilles, while a mall requires a duct network with dampers zoned by area. In both cases the positions of lighting, visitor traffic and entry doors are recorded before supply outlets are placed.

Reflective metal surfaces make heat worse, how does the system handle that?

The system is sized well above standard to account for heat gain from reflective surfaces. Regular inspection of outdoor coils and the compressor is essential to prevent chronic thermal stress.

Units break down from constant thermal pressure, what is the solution?

Regular preventive maintenance cuts downtime. We inspect the compressor, coils and filters, replacing weak parts before they fail.

Do we need extra compressors or one powerful system?

Extra compressors provide flexibility and spread the load; if one fails, the others continue. This beats a single powerful unit for ease of maintenance and reliability.

High temperatures affect outdoor unit performance, what temperature range do they tolerate?

Standard units operate efficiently even in high ambient heat. Shading or protective screens around outdoor units lower ambient temperature and noticeably boost efficiency.

The Jeddah corniche in cool weather

Cooling built around your trading hours

WhatsApp your floor plan or a photo of the space, or call us, and we will arrange a site survey at a time that suits you, Saturday to Thursday.

CallWhatsApp