Mall & retail HVAC in Riyadh, Riyadh Region
Mall and retail HVAC in Riyadh balances heavy cooling loads from open doors, lighting and shifting crowds during peak hours, with each tenant needing its own unit. Rooftop packaged units give flexibility in distribution and save valuable indoor space.
4.9 on Google- Separate tenants
- Rooftop packaged
- Off-hours service
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When you need a retail HVAC specialist
- 1
A new mall or shopping centre
A poor design from the start means cold zones next to stifling ones and endless tenant complaints. We study the heat load of each zone separately and choose the right unit type before the ceiling is built.
- 2
An existing shop with uneven cooling
The back of the shop is cold while the front near the door stays hot at peak hours. The cause is usually the air outlet layout or the unit size; a site survey identifies which and fixes the problem without replacing the whole system.
- 3
Condensate dripping on shelves or display
A single drip on stock or a glass display front damages the product and the shop's image. The cause is usually weak insulation, a blocked condensate line or an unlevel unit, all of which can be diagnosed and fixed in one visit.
Who it's for
Opening a new shop inside a mall
We design an independent unit for your space and install ductwork and condensate lines before finishing work so your opening is not delayed.
Ask on WhatsAppManaging an existing commercial complex
We review the existing system and set a preventive and corrective maintenance contract scheduled outside trading hours so tenants are not affected.
Ask on WhatsApp
What the job covers
What our mall and retail work covers
- Heat load study per zone
- Rooftop packaged unit installation
- Independent units per tenant
- Ductwork from our workshop
- Maintenance contracts off peak
How we work
How we work
- 1
Site survey and loads
We visit the site and map every heat source: entrances, lighting, expected crowd density and facade orientation, then size the units correctly for each section.
- 2
Design and materials
We design the duct network in our own workshop from G90 galvanised sheet to dimensions that give even air distribution, and select units from brands we distribute such as Carrier, YORK and Gree.
- 3
Installation coordinated on site
We coordinate installation with the project programme so ductwork does not delay finishing trades, and supply copper runs of up to 30 metres without welded joints.
- 4
Start-up and maintenance contract
We start up the system and check air distribution in every section, then set a preventive and corrective maintenance schedule timed so work never overlaps with the shop's trading hours.
Why Alrabih?
Designed for the space or just fitted?
| Alrabih | The usual way | |
|---|---|---|
| Air distribution | Load study per zone | One unit for the whole space |
| Ductwork | G90 sheet, sized for the job | Off-the-shelf wrong size |
| Condensate | Dedicated line away from stock | Risk of drips on shelves |
| Maintenance | Scheduled outside shop hours | Surprise outage during trade |
| Copper runs | Up to 30 m, weld-free | Unspecified pipe source |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
Mall & retail HVAC in cities near Riyadh
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Riyadh
What sets this city apart
Malls and shops in Riyadh range from clothing and electronics to restaurants and cafés, each needing precise temperature and humidity control to protect stock and displays. Open doors and strong summer lighting drive the cooling load sharply, and separate units for each tenant allow cost-sharing and maintenance to fit trading hours.
Riyadh is the Kingdom's capital on the Najd plateau, with a hot dry desert climate: intense summer heat and dust, cool winters, and malls and shops spread across residential and commercial districts.
The typical setup is packaged units on the mall roof with separate duct runs to each shop or zone.
The AC setup in Riyadh
- 1
Packaged units on mall roof
Rooftop packaged units give flexibility in distributing cooling to each floor and shop, and keep interior ceilings clear.
- 2
Separate duct per tenant or group
Each shop or adjacent group has its own duct with an independent thermostat, making maintenance and control straightforward.
- 3
Sealed condensate drainage
Condensate drains are installed safely away from stock and customers, with proper slopes to prevent leaks.
Before the visit
Before our visit in Riyadh
- 1
Send the mall layout and shop plan
Send the architectural plan showing each shop boundary and common areas, so we can locate units and duct routes before design.
- 2
Identify rooftop space for units
Agree with the mall engineer on rooftop unit locations and maintenance access space, and the distance from door and window edges.
- 3
Plan condensate and return paths
Tell us where the main drains are in the mall, and where we can safely route copper and duct away from stock and customers.
Other services in Riyadh
FAQ
Questions about Mall & retail HVAC
How do you handle doors that open onto the street all day?
An open door draws in outside air and spikes the heat load suddenly. We include that load in the design and direct a supply outlet above the entrance to form an air barrier that reduces mixing. The survey confirms which arrangement suits each specific doorway.
Do you install separate units for each mall tenant?
Yes. A separate unit per tenant means each shop controls its own cooling and a fault in one unit does not affect the neighbour. It also makes consumption readings straightforward and makes maintenance responsibility clear for each party.
Why do you prefer rooftop packaged units for malls?
A rooftop packaged unit keeps the condenser and evaporator in one casing above the roof, freeing every inch of shop floor from outdoor units and shortening the duct run. Maintenance happens on the roof without entering the shop, which fits scheduling work outside trading hours.
How do you handle the effect of local climate conditions on rooftop units?
Rooftop units operate in hot, dusty air that strains the condenser and speeds fin corrosion. We specify units with corrosion-resistant coatings, and the site survey accounts for the building's conditions and its city's climate. Coil cleaning and compressor and condenser checks are included in the preventive schedule of every maintenance contract.
Does air distribution design differ between a small shop and a large mall?
The site survey decides. A small shop may need only a concealed unit with directional grilles, while a mall requires a duct network with dampers zoned by area. In both cases the positions of lighting, visitor traffic and entry doors are recorded before supply outlets are placed.
How do you manage the heavy load from open doors and crowds in a mall?
We install units sized for the full load including heat loss through doors, lighting and crowds, and test the distribution in every area before handover so cold air reaches consistently.
Can each tenant control their cooling independently?
Yes. We design a separate unit for each shop or adjacent group of shops, each with its own thermostat so the tenant can adjust it to suit his needs and trading hours.
How does Riyadh's intense summer heat affect unit performance?
The choice of unit and its placement on the roof accounts for extreme temperatures, so it runs efficiently and maintains cooling, and we ensure good ventilation around the outdoor units.
Can the duct be routed so no water drips onto the shops below?
We install the duct and copper with proper slope to planned drains, and position outlets and condensate carefully so no water falls on stock or customers.


























































































