Find the leak first
Refrigerant charging in Al Muhammadiyah
In Al Muhammadiyah, north Jeddah, modern villas rely on central AC with a sealed refrigerant circuit. When cooling drops gradually, the cause may be a slow leak in the pipes, and adding refrigerant alone without fixing the leak wastes the charge and strains the compressor.
- Leak located
- Vacuum and test
- Accurate charge
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Signs the charge is low
- 1
Weak cooling and a compressor that runs on
The unit runs for hours without bringing the temperature down, or cools very slowly. This is usually the first sign the charge is low and the circuit can no longer move heat efficiently.
- 2
Frost on the pipes or evaporator coil
Ice on the thin pipe or on the evaporator coil points to low refrigerant pressure. Continued running can damage the coil. Where the frost forms helps the technician narrow down the problem area.
- 3
A refrigerator or cold room that will not hold temperature
In commercial or industrial refrigeration equipment, a rising cabinet temperature means stock at risk. Low refrigerant is one possible cause, and confirming it needs pressure readings and a circuit check on site.
Who it's for
Your window or portable unit cools slowly
We check circuit pressure, locate and repair the leak, then vacuum and charge to the type shown on your unit's nameplate.
Ask on WhatsAppYour cold room or commercial fridge will not hold temperature
We measure pressure, identify why the cabinet temperature is rising, repair any leak found, then charge to the correct refrigerant type for that unit.
Ask on WhatsApp
What the work covers
- Pressure check and leak location
- Leak repair before charging
- Vacuum and tightness test
- Charge to nameplate refrigerant
- Run test and performance check
How we work
How we work
- 1
Inspect and locate leak
The technician measures circuit pressure and checks joints and components that corrode in Jeddah's humid, salty air, pinpointing the leak before any other step.
- 2
Repair the leak
The technician repairs the leak point, whether a loose joint, a cracked pipe or corrosion in part of the circuit. The unit is not charged until the repair is confirmed tight.
- 3
Vacuum and pressure test
The circuit is evacuated with a vacuum pump to remove air and moisture, then the reading is watched to confirm pressure holds before refrigerant is introduced.
- 4
Charge and run
The unit is charged to the nameplate type and amount, then run and checked for proper performance on site before handover.
Fix the leak or just top it up?
| Alrabih | The usual way | |
|---|---|---|
| The leak | Found and fixed first | Often ignored |
| Vacuum | Before every charge | Sometimes skipped |
| Refrigerant type | As the nameplate states | May be mixed or swapped |
| Compressor | Protected by correct charge | Worn by wrong charge |
| Refrigeration equipment | AC, fridges and cold rooms | Usually AC only |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Muhammadiyah is a modern residential area with closely spaced villas on regular plots, and central AC is standard. The sealed circuit's copper pipes are either buried underground or run inside walls and ceilings, often extending long distances from the outdoor compressor to multiple indoor units across rooms. Intense summer heat and high humidity increase pressure on joints and pipes. Our team detects the leak with an electronic tool and fully vacuums the circuit before proper recharging.
Al Muhammadiyah is in the north, a contemporary residential area with modern closely spaced villas in a regular layout.
Each villa here typically has one central compressor with long copper lines serving multiple indoor units.
The AC setup in Al Muhammadiyah
- 1
One central compressor with long pipe runs
Villas here typically have one outdoor compressor connected by copper lines extending through walls and ceilings to multiple units.
- 2
Lines hidden underground and within walls
Most lines are buried under foundations or concealed in walls, making leak detection require advanced equipment.
- 3
Multiple wall units in different rooms
The villa has multiple wall units distributed across rooms and living areas, all connected to one refrigerant circuit.
Before the visit
Before our visit in Al Muhammadiyah
- 1
Collect the AC plan from the contractor
If you have a plan showing the pipe and connection routes from initial installation, this helps greatly in locating the leak.
- 2
Ensure the team can reach the outdoor unit
Check that the team can easily reach the outdoor compressor and that gates or fences are accessible.
- 3
Identify all indoor unit locations
Tell us the number and location of all indoor units in the villa so the team can assess the complete system.
More districts for Refrigerant charging
Other services in Al Muhammadiyah
FAQ
Questions about Refrigerant charging
Can you just add refrigerant without looking for the leak?
A sealed refrigerant circuit does not consume refrigerant. A low charge means there is a leak somewhere. Adding refrigerant without finding and repairing that leak brings the same fault back quickly and can damage the compressor. The correct sequence is always to locate the leak, repair it, pull a vacuum on the circuit, and then charge to the type and quantity shown on the unit's nameplate.
Where does refrigerant leak in commercial refrigeration equipment?
The most common points are expansion fittings and restrictions on the liquid line, flare joints at the evaporator and condenser, and service valves where the rubber seals have aged. In commercial refrigeration, old copper pipe welds weakened by continuous compressor vibration are also a frequent source. The exact location is found during the site inspection.
Does the refrigerant type affect how the unit performs?
Yes. Every unit is designed for a specific refrigerant type with defined operating pressures and heat transfer properties. Using a different type changes those pressures and can either overload the compressor or reduce cooling output. For this reason the unit is always charged with the exact type shown on its nameplate and no substitute is used.
Is the charging work different for a home AC unit and a commercial refrigerator?
Yes, they differ in several ways. Commercial refrigeration units operate at pressures and with refrigerant types distinct from those in air conditioners, and their target temperatures are much lower. The pipe circuits are also longer and often include multiple distributors and valves that require careful inspection before vacuuming and charging. The nature of each circuit determines the procedure.
Is the charging work different for a home AC unit and a commercial refrigerator?
The core steps are the same: locate the leak, repair it, vacuum the circuit, then charge to the nameplate type. Commercial refrigeration units sometimes have additional valves and components that require a different inspection approach. What each unit needs is determined by the technician on site after pressure readings and a circuit check.
The villa is new but cooling has dropped quickly, could there be an installation defect?
There could be a leak in a connection from initial installation. We inspect all joints and pipes with a detector and look for oil traces (a leak sign), then seal the leak and recharge properly.
The pipes run a very long distance from the compressor, does that increase leak risk?
Yes, long pipes and multiple connections increase potential weak points. We recommend annual checks and careful inspection of joints, especially those near foundations and floors.
The air is very humid in summer, does it affect the refrigerant and joints?
Humidity speeds copper and joint corrosion over time. We recommend good insulation for exposed pipes and annual checks before summer arrives.
Can I tell if there is a leak without calling a technician?
Some signs suggest a leak: gradual cooling decline, odd compressor noise, or oily residue around joints. But precise detection requires a specialised electronic tool, which is why we recommend preventive periodic checks.
