Window unit fitted right
Window AC installation in Al Harazat
In Al Harazat, east Jeddah, fitting window AC units in medium villas and modern apartment blocks demands robust sealing against dust and the eastern heat. Alrabih's team levels the frame precisely, fills every gap, and tilts the unit carefully so condensate drains safely away from the walls.
- Firm frame
- Sealed gaps
- Outward drain
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a window unit is the right choice
- 1
A room with no outdoor unit space
Some rooms have no wall facing a suitable space for an outdoor unit. A window AC is the practical answer: one unit in the opening cools the room and expels heat directly outside.
- 2
An annex, staff housing or storeroom
Annexes, staff rooms and warehouses need real cooling without the cost of long copper and cable runs. A window unit suits these spaces well when the right opening exists or can be made.
- 3
An existing window of the right size
When a wall already has a window opening that matches the unit you have chosen, the frame fits straight in without cutting new concrete. We confirm at the survey that the opening suits the unit and the wall carries the load.
Who it's for
Need to cool a maid's room or home annex
We survey the opening or proposed wall in the annex, fit the unit in a secure frame and seal every gap so no hot humid air enters the space.
Ask on WhatsAppManaging a staff housing building that needs practical cooling
We survey each room and its existing openings, then install units in level frames with the correct outward tilt in every room as the survey findings direct.
Ask on WhatsApp
What the installation covers
- Opening and wall check
- Frame levelled and secured
- Gaps sealed with insulation
- Drainage tilt adjusted
- Unit started and tested
How we work
How we work
- 1
Send a photo
WhatsApp us a photo of the opening or the proposed wall and your district, so the technician arrives with the right frame and fixings.
- 2
Site survey
On site the technician measures the opening, checks the wall, confirms there is a suitable power point near the unit, and agrees with you on any changes needed before starting.
- 3
Fit and seal
We fit the frame level, set the unit with the correct outward tilt, then seal every gap around the frame so no hot air, dust or humidity enters.
- 4
Start-up and handover
We run the unit, check the cooling and confirm condensate flows outward, then leave the space clean and show you how to clean the filter.
Proper installation or just placing the unit?
| Alrabih | The usual way | |
|---|---|---|
| Frame | Level and firmly secured | Propped without fixing |
| Gaps | Sealed with insulating materials | Open or thin plastic |
| Tilt | Outward fall drains water | Level or tilted inward |
| Power | Dedicated nearby socket | Extension from another room |
| Site cleanliness | Space left clean | Dust and debris left behind |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Harazat is a growing residential district in east Jeddah with medium villas and modern apartment blocks with standard windows, and owners often choose window units for side and spare rooms because of the intense eastern heat and desire to save on electricity. The eastern exposure means direct sun and desert dust, so precise sealing and correct tilt are critical to prevent excess heat and moisture damaging walls and frames. Openings here are usually modern standard sizes allowing safe and swift fitting.
Al Harazat sits in east Jeddah, a growing residential district of medium villas and modern buildings with standard windows.
Most windows here are modern standard size with strong metal frames capable of supporting various window unit weights.
The AC setup in Al Harazat
- 1
One or two window units for side and spare rooms
Villa and apartment owners in Al Harazat typically fit window units in east-facing, side and spare rooms to ease the eastern heat load.
- 2
Modern metal frames with standard glass
Modern window frames in Al Harazat are strong metal with single or double glass, providing a solid safe base for mounting.
- 3
Uniform standard openings with regular depth
Openings here are modern uniform standards with regular depth, making measurement and fitting straightforward without special modifications.
Before the visit
Before our visit in Al Harazat
- 1
Clean the frame and glass before we visit
Dust and grime on the frame can affect tilt measurement and sealing. Clean the window before the fitting day.
- 2
Tell us about sun and heat around the window
Tell us if the window gets direct sun all day so we can choose the best fit time and assess whether the unit needs higher capacity.
- 3
Ensure the outdoor area below the window is clear
Check that no bins, wires or furniture below the window block the condensate drain path downward and outward.
More districts for Window AC installation
Other services in Al Harazat
FAQ
Questions about Window AC installation
Can you cut a new opening in the wall if there is none?
Yes, if no suitable opening exists we can cut one. At the survey we check the wall type and thickness and look for columns or cables that might be in the way, then agree the best position with you before any cutting begins.
Why does the outward tilt matter on a window unit?
A window unit produces condensate on its indoor side throughout operation. If the unit sits level or tilts inward, water pools in the base and runs down the inside wall. A slight outward tilt sends that water to the back of the unit and out, away from the wall and furniture.
How do you seal the gaps around the frame given Jeddah's climate?
Jeddah combines high heat, humidity and salty sea air, so sealing materials must hold up in those conditions. We use insulating and sealing materials suited to the opening and wall type, and the survey determines the right choice based on the gap size and wall construction.
Does a window unit need its own power point?
A window unit draws a high current at start-up, and sharing a socket with other appliances strains the wiring and trips the breaker. The technician checks at the survey that a suitable socket is close to the unit position, and if one is not there we explain what is needed before installation proceeds.
Does the weight of a window unit affect how it is fixed?
Yes, the unit's weight directly affects how the frame is fixed and what support is needed. A concrete wall requires different treatment from a brick wall, and a wide opening needs more support than a narrow one. The technician decides at the survey what fixing method and materials suit the unit and the wall.
The eastern sun is very hot, does sealing protect against excess heat?
Good sealing reduces heat leakage through gaps around the unit, but cooling efficiency also depends on the unit's capacity. We ensure the unit is firmly seated and hot air exhaust is completely unobstructed.
Fine dust blocks the filter quickly, does proper sealing stop dust entering?
Yes, careful sealing around the opening cuts fine dust entry. But the filter needs regular cleaning every two to three weeks to ensure good airflow.
The district is fairly new, will my windows support a modern window unit with enough strength?
Yes, modern windows in Al Harazat meet strong standards. We inspect the frame, fasteners and glass before fitting to confirm they safely support the unit.
Condensate may freeze or leak when switching between heat and cool, how do you ensure safe drainage?
Correct outward tilt ensures condensate drains by gravity even through temperature swings. We measure the tilt precisely and check the drain path before running the unit for free flow.
