Window unit fitted right
Window AC installation in Petromin
In Petromin, South Jeddah, installing window AC in villas and homes needs special care because of the intense heat and coastal humidity. Alrabih's team ensures the frame is level, seals every gap against salty dusty air, and tilts the unit slightly outward so condensate drains safely outside.
- Firm frame
- Sealed gaps
- Outward drain
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a window unit is the right choice
- 1
A room with no outdoor unit space
Some rooms have no wall facing a suitable space for an outdoor unit. A window AC is the practical answer: one unit in the opening cools the room and expels heat directly outside.
- 2
An annex, staff housing or storeroom
Annexes, staff rooms and warehouses need real cooling without the cost of long copper and cable runs. A window unit suits these spaces well when the right opening exists or can be made.
- 3
An existing window of the right size
When a wall already has a window opening that matches the unit you have chosen, the frame fits straight in without cutting new concrete. We confirm at the survey that the opening suits the unit and the wall carries the load.
Who it's for
Need to cool a maid's room or home annex
We survey the opening or proposed wall in the annex, fit the unit in a secure frame and seal every gap so no hot humid air enters the space.
Ask on WhatsAppManaging a staff housing building that needs practical cooling
We survey each room and its existing openings, then install units in level frames with the correct outward tilt in every room as the survey findings direct.
Ask on WhatsApp
What the installation covers
- Opening and wall check
- Frame levelled and secured
- Gaps sealed with insulation
- Drainage tilt adjusted
- Unit started and tested
How we work
How we work
- 1
Send a photo
WhatsApp us a photo of the opening or the proposed wall and your district, so the technician arrives with the right frame and fixings.
- 2
Site survey
On site the technician measures the opening, checks the wall, confirms there is a suitable power point near the unit, and agrees with you on any changes needed before starting.
- 3
Fit and seal
We fit the frame level, set the unit with the correct outward tilt, then seal every gap around the frame so no hot air, dust or humidity enters.
- 4
Start-up and handover
We run the unit, check the cooling and confirm condensate flows outward, then leave the space clean and show you how to clean the filter.
Proper installation or just placing the unit?
| Alrabih | The usual way | |
|---|---|---|
| Frame | Level and firmly secured | Propped without fixing |
| Gaps | Sealed with insulating materials | Open or thin plastic |
| Tilt | Outward fall drains water | Level or tilted inward |
| Power | Dedicated nearby socket | Extension from another room |
| Site cleanliness | Space left clean | Dust and debris left behind |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Petromin is a relatively modern residential district with separate villas and housing expansions on wider plots than older areas, offering clearer access to room windows and exterior walls. Most villas here are built to more recent standards, but windows need careful inspection before installation because heat and coastal humidity speed up deterioration of wooden or metal frames. Window AC installation requires the opening to be resealed with proper insulation against hot air and salt seepage.
Petromin is in South Jeddah, a modern residential area of separate villas close to the coast.
Most Petromin villas have standard window openings in external walls, which simplifies installation but demands strong sealing against coastal moisture.
The AC setup in Petromin
- 1
Window in a villa's exterior wall
Most Petromin villas allow window AC installation in a living room or bedroom, with a direct exterior opening and safe frame access.
- 2
Opening preparation with salt-resistant sealing
We reseal the window opening with high-grade insulation and silicone to protect the frame and wall from moisture and salt seepage.
- 3
Installation with outward tilt for safe drainage
We mount the unit at a slight outward angle to ensure condenser water drains directly outside with no risk of inner seepage.
Before the visit
Before our visit in Petromin
- 1
Confirm the chosen window location and villa number
Tell us the villa number, room and preferred window before the visit so we can inspect the opening and frame in detail.
- 2
Ensure parking is available for the team
Confirm the team and equipment can park easily near the villa's exterior wall before installation day.
- 3
Prepare the opening and clear any obstructions
Make sure the window opening is clear of any barriers or furniture blocking access, and the inner and outer frames are free of dust.
More districts for Window AC installation
Other services in Petromin
FAQ
Questions about Window AC installation
Can you cut a new opening in the wall if there is none?
Yes, if no suitable opening exists we can cut one. At the survey we check the wall type and thickness and look for columns or cables that might be in the way, then agree the best position with you before any cutting begins.
Why does the outward tilt matter on a window unit?
A window unit produces condensate on its indoor side throughout operation. If the unit sits level or tilts inward, water pools in the base and runs down the inside wall. A slight outward tilt sends that water to the back of the unit and out, away from the wall and furniture.
How do you seal the gaps around the frame given Jeddah's climate?
Jeddah combines high heat, humidity and salty sea air, so sealing materials must hold up in those conditions. We use insulating and sealing materials suited to the opening and wall type, and the survey determines the right choice based on the gap size and wall construction.
Does a window unit need its own power point?
A window unit draws a high current at start-up, and sharing a socket with other appliances strains the wiring and trips the breaker. The technician checks at the survey that a suitable socket is close to the unit position, and if one is not there we explain what is needed before installation proceeds.
Does the weight of a window unit affect how it is fixed?
Yes, the unit's weight directly affects how the frame is fixed and what support is needed. A concrete wall requires different treatment from a brick wall, and a wide opening needs more support than a narrow one. The technician decides at the survey what fixing method and materials suit the unit and the wall.
My villa is fairly new, are its window openings suitable for a window AC unit?
Usually yes, but we inspect the opening first to confirm it is level and the frame can bear the unit's weight, especially if there has been any settling or cracking.
The street outside my villa is wide, but how do you get the unit to the window?
We need your villa number and the chosen window location, and we confirm the team and equipment can reach the exterior wall easily from the street before installation day.
Humidity is strong near the beach here, does that affect the unit's lifespan?
Coastal humidity accelerates corrosion of metals and internal parts, so we use strong weathering and silicone around the opening to block salt and moisture seepage.
Where does drainage from the unit go in a villa?
We mount the unit with a slight outward tilt so water drains straight outside, and we confirm there is nothing directing it back toward the inner wall or the foundation.
