Window unit to split
Window-to-split conversion in Al Aqeeq
In Al Aqeeq, north Jeddah, switching from a window unit to a split removes a large opening that bleeds heat, dust and noise, and restores daylight and quiet. We seal the opening precisely and fit a new split through its own small hole.
- Sealed opening
- Window restored
- Quiet split
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Why owners make the switch
- 1
Non-stop noise from the old unit
The window unit motor runs right inside the room, and the vibration gets worse over the years. Many owners say sleeping next to it has become impossible, and switching to a split removes the source entirely.
- 2
The wall opening lets in heat and dust
The foam and tape sealing the gap around a window unit frame degrade in Jeddah's salty, humid air. The large opening becomes a clear source of heat loss, dust in the windy season and sometimes rain in winter.
- 3
The blocked window darkens the room
A window unit fills the whole window or most of it, so the room loses its natural light and ventilation at times when you do not need cooling. Getting the window back fully changes the room noticeably.
Who it's for
Own a villa and want the windows back
We remove the window units from your villa rooms, close each opening with block, insulation and plaster, then fit a split in each room through its own core hole.
Ask on WhatsAppManaging a rental flat and want to raise its value
We convert the flat's window unit to a quiet split and restore the wall and window to their original condition, improving the unit for the next tenant.
Ask on WhatsApp
What the conversion covers
- Remove old unit and frame
- Block plaster and insulation
- Paint inside and outside
- New core hole for split
- Insulated copper and drain
How we work
How we work
- 1
Survey the wall and opening
We check the wall thickness and the build around the old opening, agree where the new core hole for the split goes away from the old frame, and decide where the outdoor unit will sit.
- 2
Remove and close
We remove the window unit and its frame without breaking the surrounding wall, then close the opening with blockwork or lightweight concrete to match the original construction, with thermal insulation set inside the layers before plastering.
- 3
Plaster and paint both sides
We plaster and paint the closed opening on both the inside and outside faces to match the existing wall, leaving no trace of the old opening that could let in air or moisture.
- 4
Fit the new split
We core the agreed spot for the split, run insulated Mueller copper and a drain line with the correct fall, vacuum the line before start-up and test everything with you present.
A proper seal or a quick patch?
| Alrabih | The usual way | |
|---|---|---|
| Closing the opening | Block, plaster and insulation | Foam or a timber board |
| Outside face | Plastered and painted flush | Visible mark or cracks |
| Thermal insulation | Inside wall before plastering | None |
| New split core hole | Chosen away from old frame | Wherever drilling is easiest |
| Outside paint | Matched to existing wall colour | Different colour or unpainted |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Aqeeq is home to modern luxury villas on spacious plots, quality residential towers and green spaces with well-organised wide streets. Residents here seek the highest standards of comfort, quality and appearance, and a window-to-split conversion delivers all three by lifting cooling efficiency and aesthetics. Outdoor units need professional mounting on luxury homes' walls and balconies.
Al Aqeeq lies in north Jeddah, a district of luxury villas and quality residential towers with gardens and wide streets.
Most villas and towers here have generous outdoor spaces and fine façades suited to professional outdoor unit mounting.
The AC setup in Al Aqeeq
- 1
Premium split with professionally mounted outdoor unit
In the luxury villas here, we install premium-grade units with professional mounting that blends with the home's design.
- 2
Aesthetic sealing of the original window with premium materials
We fill the opening with stone, insulation and high-grade paint that perfectly matches the original façade finish.
- 3
Neat, concealed cable and pipe runs
Pipes and cables go through one small hole and are routed neatly, with external runs fixed to the wall so they don't look obtrusive.
Before the visit
Before our visit in Al Aqeeq
- 1
Agree on a professional outdoor unit location
Agree with our team on the most aesthetic and practical location for the unit, considering the villa's style and servicing ease.
- 2
Ensure sufficient and safe power supply
Verify a nearby power circuit meets requirements and that grounding is safe and compliant.
- 3
Tell us about the façade décor, colours and materials
Send photos of the wall to be sealed with its colours, so we match stone, paint and insulation precisely when closing the opening.
More districts for Window-to-split conversion
Other services in Al Aqeeq
FAQ
Questions about Window-to-split conversion
Do you restore the original window after closing the AC opening?
It depends on what the original opening was. In some rooms the opening was cut into a solid wall with no window frame, so it is fully closed. If the original build can take a window, we discuss that at the survey and tell you what is actually possible in your wall.
Can the old window unit hole be reused as the new split core hole?
The old opening is usually much larger than the small core a split needs, and its position may not suit the copper and drain route. It is safer to close it fully and drill a new hole in the right place, so no hidden gaps remain to let air through or collect moisture.
How do you stop humid salty air coming through the closed opening?
We place thermal insulation inside the wall layers before plastering, and use sealing materials that form a continuous barrier from inside to outside. Jeddah's combination of humidity and salt accelerates the breakdown of any temporary patch, so we treat the closed opening as a new wall section, not a surface repair.
Do I need permission from the building management before closing the opening?
In a rented flat it is wise to check with the owner or management office first, because the work changes the building's outside face. In a villa you own the decision is yours. We explain the full scope at the survey so you can get any approval needed before the work day.
Does the job change if the wall is concrete rather than block?
Yes. A concrete wall needs a different filling method and may require a repair mix rather than standard block. We identify the wall type at the survey and choose the material that bonds solidly with the existing concrete, leaving no hidden gaps for moisture to enter later.
Will sealing the window harm the villa's modern façade design?
No, we seal it with materials and colours that perfectly match the façade's design, so it looks harmonious as if that was always the plan.
Will the new outdoor unit be too visible on the villa's wall?
We choose an aesthetically suitable spot, usually the back or side wall, and ensure the mounting is neat with tidy cable runs.
The sun is intense; will the new unit handle it and how often does it need servicing?
The reliable units we fit handle Jeddah's intense dry heat, and servicing once or twice yearly keeps peak performance.
Can we hide the outdoor unit behind landscaping or screening?
Yes, we can create space behind timber screening or dense planting, but must ensure air circulates around the unit for proper cooling and drain flow.












































































