Sports club HVAC in Al Atheer, Jeddah
Sports club HVAC in Al Atheer calls for an advanced system that handles the heat and moisture from packed training halls. Alrabih designs cooling and ventilation separately for each zone of the club, and schedules maintenance outside training hours.
4.9 on Google- Multi-zone cooling
- Fresh-air ventilation
- No-downtime maintenance
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When a club needs a specialist
- 1
Stifling air in the training hall
Many people in one space raise heat and humidity fast. Tall ceilings complicate air distribution, and a system not designed for this load cannot reach body level down below.
- 2
Changing rooms and showers always damp
Moisture trapped in shower rooms and lockers causes odours and damages finishes. These zones need continuous damp-air extraction that is separate from the main cooling system.
- 3
Reception and offices overheating
Reception and offices have very different heat loads from the training hall, and their hours of use differ too. Putting them on one system means one zone cools well only at the expense of the other.
Who it's for
Building a new sports club from scratch
We design the cooling and ventilation system alongside the building layout, so duct is installed before ceilings are closed and the club opens with a system sized for each zone.
Ask on WhatsAppYour existing hall overheats during sessions
We inspect the existing system, identify whether the shortfall is in unit capacity or air distribution, and correct it without disrupting the training timetable.
Ask on WhatsApp
What the job covers
What the work covers
- Heat load survey per zone
- G90 galvanised duct to SMACNA
- Plenum box and air dampers
- Outlets and flex duct above
- Scheduled maintenance outside training hours
How we work
How we work
- 1
Survey and zone layout
We visit the club and record heat loads in each zone: the main hall, changing rooms, reception and offices, and agree the right system for each before any decision is made.
- 2
Duct and distribution design
We fabricate duct in our own workshop from G90 galvanized sheet, insulate with glass wool, and fit dampers to balance airflow between zones according to ceiling height and hall shape.
- 3
Installation and testing
We install units, duct, and air outlets, test line pressure, set the thermostat for each zone, and confirm that distribution reaches body level and does not stay up at the ceiling.
- 4
Handover and maintenance schedule
We hand over the system with a written preventive-maintenance plan that works around training and match times, so the club never has to pause during peak hours.
Why Alrabih?
Specialist design or a single system?
| Alrabih | The usual way | |
|---|---|---|
| Air distribution | Reaches body level | Pools at the ceiling |
| Different zones | Each zone its own system | One system, no balance |
| Changing rooms | Continuous damp-air extraction | Damp and odour build-up |
| Maintenance | Scheduled outside training | Clashes with club hours |
| Fresh air | Continuous exchange | Stale air stays |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Atheer is a south-zone district mixing residential and commercial buildings with open sports grounds. Training halls in clubs here need cooling that handles the high humidity and heat from large gatherings, and the coastal air underscores the need for proper drainage and glass-wool insulation on the ducts. Separate zoning lets you control temperature and humidity more precisely across the training hall, reception areas and storage.
Al Atheer lies in south Jeddah, a mixed district of residential and commercial buildings, sports grounds and open spaces.
Most clubs in Al Atheer use central ductwork with plenum boxes and dampers to distribute cooling across separate halls.
The AC setup in Al Atheer
- 1
Training hall with central ductwork
The main training area needs at least one thermostat and air outlets distributed across the ceiling or walls to ensure even cooling.
- 2
Separate zones for offices and reception
Offices and reception need less cooling than the training hall, so we use separate air dampers for each area instead of one shared thermostat.
- 3
Flexible ducts linking main runs to outlets
Flexible ducts make installation easier on irregular hall ceilings and reduce noise compared to rigid ductwork.
Before the visit
Before our visit in Al Atheer
- 1
Confirm access to the plant room
Check that the plant room or exposed roof allows room for the cooling unit, ducts and insulation. Let us know in advance if access is limited.
- 2
Coordinate with club management and coaches
Tell the club management and coaches the installation or maintenance date in advance to avoid clashing with training hours, and ask for safe parking for the van.
- 3
Prepare any existing club plans or drawings
If you have an architectural drawing or an old plan of the club, send it on WhatsApp before the visit so we can design the ducts and outlets based on the actual layout.
More districts for Sports club HVAC
Other services in Al Atheer
FAQ
Questions about Sports club HVAC
How do you distribute air in a hall with a very high ceiling?
A high ceiling means cold air tends to stay up. We solve this by selecting air outlets that throw air horizontally or downward, calculating flow velocity at the survey, and using flexible duct so the direction can be set precisely at each outlet.
Can you handle the humidity in shower rooms and changing areas?
These areas need air extraction at a higher exchange rate than the main hall. We design them as a separate zone with dedicated extraction fans and vents that maintain negative pressure, stopping moisture from spreading to the rest of the club. We use insulation materials such as Armaflex that stand up to a damp environment.
How do you separate cooling for the hall, reception and offices?
Each zone has its own thermostat set to its actual load and hours. The training hall peaks during sessions, while offices need cooling only during administrative hours. Separating the zones reduces the load on each system and keeps comfort levels right in every area without one zone affecting another.
Can the hall, reception and offices be controlled independently?
Yes, and that is what we recommend. Each zone gets its own damper and thermostat, so the club manager controls each area separately. The hall can run at full capacity during training while offices scale back after administrative hours end, matching comfort to the actual schedule of the club.
How do you maintain air quality when the hall is full of people?
A full training hall raises carbon dioxide and moisture levels quickly. At the survey we determine the right fresh-air change rate for the floor area and the expected number of users, then position the plenum box and fresh-air units so clean outdoor air enters and stale air leaves continuously, keeping comfort levels steady throughout each training session.
How does club AC differ from a standard home unit?
A club gathers large numbers in one space, generating far more heat and moisture. We design a central system with ducts and a thermostat in each zone for precise control, rather than a single unit.
How do you access the training halls from the street in Al Atheer?
Most clubs here have a main entrance wide enough for the installation team and equipment. We agree with the club management on a visit time that does not clash with the training schedule.
Does the coastal humidity affect the ducts and insulation?
Yes, high humidity near the coast makes glass-wool insulation essential on all ducts to maintain cooling efficiency and prevent moisture condensation.
What maintenance schedule does a club system need?
We schedule maintenance outside training hours, based on usage levels and season. The visit includes checking filters, ducts and the thermostat, and confirming air dampers are working and cooling flows evenly.


























































































