Sports club HVAC in Al Zumurrud, Jeddah

In Al Zumurrud to the north, where modern sports clubs and leisure facilities cluster, a club HVAC system must be built to handle the heat and moisture from intensive activity. Alrabih divides the cooling and ventilation design by zone and schedules maintenance outside training hours.

4.9 on Google
  • Multi-zone cooling
  • Fresh-air ventilation
  • No-downtime maintenance

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When a club needs a specialist

  1. 1

    Stifling air in the training hall

    Many people in one space raise heat and humidity fast. Tall ceilings complicate air distribution, and a system not designed for this load cannot reach body level down below.

  2. 2

    Changing rooms and showers always damp

    Moisture trapped in shower rooms and lockers causes odours and damages finishes. These zones need continuous damp-air extraction that is separate from the main cooling system.

  3. 3

    Reception and offices overheating

    Reception and offices have very different heat loads from the training hall, and their hours of use differ too. Putting them on one system means one zone cools well only at the expense of the other.

Who it's for

  • Building a new sports club from scratch

    We design the cooling and ventilation system alongside the building layout, so duct is installed before ceilings are closed and the club opens with a system sized for each zone.

    Ask on WhatsApp
  • Your existing hall overheats during sessions

    We inspect the existing system, identify whether the shortfall is in unit capacity or air distribution, and correct it without disrupting the training timetable.

    Ask on WhatsApp

What the job covers

What the work covers

  • Heat load survey per zone
  • G90 galvanised duct to SMACNA
  • Plenum box and air dampers
  • Outlets and flex duct above
  • Scheduled maintenance outside training hours
Request a quote

How we work

How we work

  1. 1

    Survey and zone layout

    We visit the club and record heat loads in each zone: the main hall, changing rooms, reception and offices, and agree the right system for each before any decision is made.

  2. 2

    Duct and distribution design

    We fabricate duct in our own workshop from G90 galvanized sheet, insulate with glass wool, and fit dampers to balance airflow between zones according to ceiling height and hall shape.

  3. 3

    Installation and testing

    We install units, duct, and air outlets, test line pressure, set the thermostat for each zone, and confirm that distribution reaches body level and does not stay up at the ceiling.

  4. 4

    Handover and maintenance schedule

    We hand over the system with a written preventive-maintenance plan that works around training and match times, so the club never has to pause during peak hours.

Start with step one

Why Alrabih?

Specialist design or a single system?

AlrabihThe usual way
Air distributionReaches body levelPools at the ceiling
Different zonesEach zone its own systemOne system, no balance
Changing roomsContinuous damp-air extractionDamp and odour build-up
MaintenanceScheduled outside trainingClashes with club hours
Fresh airContinuous exchangeStale air stays
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

Sports club buildings in Al Zumurrud combine large open training halls, changing rooms and indoor courts in one complex, each needing separate air handling because of different heat, humidity and activity levels. The modern northern district provides enough ground space for duct runs and outdoor units, but coordination with club management is essential to avoid disrupting daily activities during installation and maintenance.

Al Zumurrud lies in modern north Jeddah, a mixed district of villas, residential compounds and sports and commercial facilities spread across relatively open space.

Central ducted cooling with a plenum box is the standard in larger club halls, with multiple outdoor units distributed around the complex.

The AC setup in Al Zumurrud

  1. 1

    Central training hall with unified cooling

    The large hall needs powerful outdoor units and a duct network covering the full height, with a simple plenum box and dampers to control distribution.

  2. 2

    Separate rooms with independent systems

    Changing and reception areas need smaller independent units, each with its own thermostat to reduce humidity and maintain comfort.

  3. 3

    Indoor courts with advanced ventilation

    Indoor courts need higher ventilation rates due to dust and moisture, so we use insulated flexible ducts to prevent condensation inside the runs.

Before the visit

Before our visit in Al Zumurrud

  1. 1

    Confirm the club's closure hours or training schedule

    Agree with us and the club management on a suitable time for installation or maintenance, away from peak training and maximum use periods.

  2. 2

    Prepare layout drawings of the halls

    Bring us a layout showing the main halls' dimensions, entrances and exits and any outdoor terraces, so we can choose suitable positions for outdoor units and openings.

  3. 3

    Make sure the roof and outdoor areas are accessible

    Check that the team can safely reach the roof and outdoor areas around the club for unit and duct installation, and that access routes can support lifting equipment.

FAQ

Questions about Sports club HVAC

How do you distribute air in a hall with a very high ceiling?

A high ceiling means cold air tends to stay up. We solve this by selecting air outlets that throw air horizontally or downward, calculating flow velocity at the survey, and using flexible duct so the direction can be set precisely at each outlet.

Can you handle the humidity in shower rooms and changing areas?

These areas need air extraction at a higher exchange rate than the main hall. We design them as a separate zone with dedicated extraction fans and vents that maintain negative pressure, stopping moisture from spreading to the rest of the club. We use insulation materials such as Armaflex that stand up to a damp environment.

How do you separate cooling for the hall, reception and offices?

Each zone has its own thermostat set to its actual load and hours. The training hall peaks during sessions, while offices need cooling only during administrative hours. Separating the zones reduces the load on each system and keeps comfort levels right in every area without one zone affecting another.

Can the hall, reception and offices be controlled independently?

Yes, and that is what we recommend. Each zone gets its own damper and thermostat, so the club manager controls each area separately. The hall can run at full capacity during training while offices scale back after administrative hours end, matching comfort to the actual schedule of the club.

How do you maintain air quality when the hall is full of people?

A full training hall raises carbon dioxide and moisture levels quickly. At the survey we determine the right fresh-air change rate for the floor area and the expected number of users, then position the plenum box and fresh-air units so clean outdoor air enters and stale air leaves continuously, keeping comfort levels steady throughout each training session.

Our main training hall is very large, how do you cool it?

We design a system with multiple outdoor units sized for the hall's volume and the heat load from activities. We use a plenum box and dampers to distribute the cool air evenly across the space.

The club runs every day, when can you do maintenance?

We schedule maintenance in early morning hours or during the club's regular closure periods, coordinated with management to avoid disrupting scheduled training sessions.

Humidity builds up heavily in the halls after intensive training, can you handle that?

Yes, we select units with high dehumidification capacity and proper drain lines for Jeddah's coastal humidity, and keep all drain openings clear on every maintenance visit.

Can you position the air outlets where we specify?

Yes, we work with the club's engineer or contractor to place the air outlets and thermostats to match the use pattern of each zone.

The Jeddah corniche in cool weather

Start with a club survey

Send us the club layout or hall photos on WhatsApp, or call us, and we will arrange a survey visit Saturday to Thursday from 8 am.

CallWhatsApp