Sports club HVAC in Kilo 14, Jeddah

In Kilo 14, south Jeddah, newer sports halls and semi-open courts run heavily year-round. Alrabih installs an advanced central AC system with precise air dampers and distributed outlets maintaining even cooling across the full hall, plus regular maintenance outside busy hours.

4.9 on Google
  • Multi-zone cooling
  • Fresh-air ventilation
  • No-downtime maintenance

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When a club needs a specialist

  1. 1

    Stifling air in the training hall

    Many people in one space raise heat and humidity fast. Tall ceilings complicate air distribution, and a system not designed for this load cannot reach body level down below.

  2. 2

    Changing rooms and showers always damp

    Moisture trapped in shower rooms and lockers causes odours and damages finishes. These zones need continuous damp-air extraction that is separate from the main cooling system.

  3. 3

    Reception and offices overheating

    Reception and offices have very different heat loads from the training hall, and their hours of use differ too. Putting them on one system means one zone cools well only at the expense of the other.

Who it's for

  • Building a new sports club from scratch

    We design the cooling and ventilation system alongside the building layout, so duct is installed before ceilings are closed and the club opens with a system sized for each zone.

    Ask on WhatsApp
  • Your existing hall overheats during sessions

    We inspect the existing system, identify whether the shortfall is in unit capacity or air distribution, and correct it without disrupting the training timetable.

    Ask on WhatsApp

What the job covers

What the work covers

  • Heat load survey per zone
  • G90 galvanised duct to SMACNA
  • Plenum box and air dampers
  • Outlets and flex duct above
  • Scheduled maintenance outside training hours
Request a quote

How we work

How we work

  1. 1

    Survey and zone layout

    We visit the club and record heat loads in each zone: the main hall, changing rooms, reception and offices, and agree the right system for each before any decision is made.

  2. 2

    Duct and distribution design

    We fabricate duct in our own workshop from G90 galvanized sheet, insulate with glass wool, and fit dampers to balance airflow between zones according to ceiling height and hall shape.

  3. 3

    Installation and testing

    We install units, duct, and air outlets, test line pressure, set the thermostat for each zone, and confirm that distribution reaches body level and does not stay up at the ceiling.

  4. 4

    Handover and maintenance schedule

    We hand over the system with a written preventive-maintenance plan that works around training and match times, so the club never has to pause during peak hours.

Start with step one

Why Alrabih?

Specialist design or a single system?

AlrabihThe usual way
Air distributionReaches body levelPools at the ceiling
Different zonesEach zone its own systemOne system, no balance
Changing roomsContinuous damp-air extractionDamp and odour build-up
MaintenanceScheduled outside trainingClashes with club hours
Fresh airContinuous exchangeStale air stays
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

Kilo 14 is a newer growth area in south Jeddah with modern, spacious sports facilities and open layouts, making it easier to run longer air ducts and flexible connections with fewer obstructions. Yet the proximity to outer roads and commercial zones means the outdoor units face more dust and pollution, and intense heat plus high humidity from group training sessions demand regular cleaning of evaporators and outlets to prevent performance drop.

Kilo 14, south Jeddah, is a newer district with contemporary sports facilities and wide open spaces between projects.

Modern sports halls here typically use a central system with a single compressor unit connected to a plenum box and multiple outlets spread across the full space.

The AC setup in Kilo 14

  1. 1

    Single central compressor unit

    Most modern halls use a single compressor unit in a separate room near the hall, connected to a plenum box that redistributes cold air through flexible ducts and outlets.

  2. 2

    Ceiling outlets distributed around the perimeter

    Outlets are placed on the ceiling at regular intervals around the hall perimeter or near main training zones to ensure even coverage.

  3. 3

    Multi-sensor thermostat system

    In large halls, we install temperature sensors at multiple points connected to a central thermostat that controls overall temperature based on readings from different zones.

Before the visit

Before our visit in Kilo 14

  1. 1

    Measure the hall and identify main training zones

    Send us the hall dimensions, ceiling height and number of training zones with their function, so we can calculate outlet and duct sizing accurately.

  2. 2

    Clarify the outdoor unit location and entry point

    Designate the best location for the outdoor unit away from dust and noise sources, and tell us the main entrance and routes the team and equipment will use.

  3. 3

    Confirm adequate power supply and proper grounding

    Check that electrical connections at the unit location can handle the system load, that grounding is correct, and there is adequate space to run wiring and pipes without obstruction.

FAQ

Questions about Sports club HVAC

How do you distribute air in a hall with a very high ceiling?

A high ceiling means cold air tends to stay up. We solve this by selecting air outlets that throw air horizontally or downward, calculating flow velocity at the survey, and using flexible duct so the direction can be set precisely at each outlet.

Can you handle the humidity in shower rooms and changing areas?

These areas need air extraction at a higher exchange rate than the main hall. We design them as a separate zone with dedicated extraction fans and vents that maintain negative pressure, stopping moisture from spreading to the rest of the club. We use insulation materials such as Armaflex that stand up to a damp environment.

How do you separate cooling for the hall, reception and offices?

Each zone has its own thermostat set to its actual load and hours. The training hall peaks during sessions, while offices need cooling only during administrative hours. Separating the zones reduces the load on each system and keeps comfort levels right in every area without one zone affecting another.

Can the hall, reception and offices be controlled independently?

Yes, and that is what we recommend. Each zone gets its own damper and thermostat, so the club manager controls each area separately. The hall can run at full capacity during training while offices scale back after administrative hours end, matching comfort to the actual schedule of the club.

How do you maintain air quality when the hall is full of people?

A full training hall raises carbon dioxide and moisture levels quickly. At the survey we determine the right fresh-air change rate for the floor area and the expected number of users, then position the plenum box and fresh-air units so clean outdoor air enters and stale air leaves continuously, keeping comfort levels steady throughout each training session.

Modern halls in Kilo 14 are very large, how do you ensure even cooling distribution?

We design the system by calculating the hall volume and expected occupancy precisely, and install outlets evenly spaced across the ceiling or walls, with dampers in the plenum for zone-by-zone control.

Dust and pollution from nearby roads affect the outdoor unit, how do you handle it?

We position the outdoor unit away from dust sources as much as possible, install protective screens around the outdoor coil, and clean both indoor and outdoor evaporators on a regular schedule to minimize dust impact on airflow.

Do long flexible ducts in large halls need strong insulation?

Yes, in large halls we use flexible ducts with glass-wool insulation of appropriate thickness to reduce cooling loss over long distances, especially if the run passes through heat-exposed areas.

When can the system be serviced without affecting club activities?

We coordinate with the hall management to find low-use times or days, often between training sessions or on closure days, and complete full service and cleaning at times that do not create pressure on staff or members.

The Jeddah corniche in cool weather

Start with a club survey

Send us the club layout or hall photos on WhatsApp, or call us, and we will arrange a survey visit Saturday to Thursday from 8 am.

CallWhatsApp