Testing and commissioning in Riyadh, Riyadh Region

Testing and commissioning a system in Riyadh confirms that every unit and every duct run works as designed before handover. We check line pressure, leaks, vacuum and electrical connections, then start the system, measure temperature and airflow at each outlet and balance the rooms.

4.9 on Google
  • Line test
  • Air balance
  • Controls set

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When commissioning becomes necessary

  1. 1

    A new system before handover

    The contractor has finished and handover is due. Before the owner signs off, you need confirmation that the line is tight, the ductwork distributes air evenly and the thermostat controls the system as designed. No earlier stage replaces this step.

  2. 2

    A major change to an existing system

    Rooms have been added, a large duct section replaced or the central unit changed. A major modification shifts the pressure and airflow balance across the whole system and calls for a full test as if it were new.

  3. 3

    Rooms that cool unevenly

    Some rooms are too cold while others barely cool, even though the system runs. The cause is usually dampers that were never balanced or air outlets sized for a different room, both of which are corrected during the balancing stage of commissioning.

Who it's for

  • Your new villa is ready for contractor handover

    We test the refrigerant line, ductwork and every air outlet, set the dampers and check the thermostat before you accept the system from the contractor.

    Ask on WhatsApp
  • You have added floors and modified the AC system

    A major modification shifts balance across the whole system. We test pressure and airflow and reset every damper across all zones.

    Ask on WhatsApp

What the job covers

What the commissioning covers

  • Line pressure and vacuum test
  • Electrical circuits and protection checks
  • Air temperature at every outlet
  • Damper adjustment for room balance
  • Thermostat and control panel check
Request a quote

How we work

How we work

  1. 1

    Pre-start check

    Before start-up the technician checks copper joints, ductwork connections and wiring, and confirms insulation is intact and ducts are clear. A fault found before start-up is far easier to correct than one found after.

  2. 2

    Line test

    We pressurise the refrigerant line and watch the reading to confirm no leak, then vacuum the line to remove air and vapour, hold the reading steady, and only then release the refrigerant.

  3. 3

    First start-up and airflow

    We start the system and measure the air temperature at every outlet, then adjust each damper until the rooms reach the temperatures the system was designed to deliver.

  4. 4

    Controls check and handover

    We test the thermostat and any control panel, confirm the system responds to every command, then show the owner how to set the thermostat and the right setting for each room before we hand the system over.

Start with step one

Why Alrabih?

Planned commissioning or a quick switch-on?

AlrabihThe usual way
Leak testPressure and vacuum testStart-up with no test
Room balanceEach damper measured and setUneven cooling left as is
Electrical checkProtections and wiring reviewedOnly visual power-on
ControlsThermostat set and testedLeft on its first setting
Plenum boxDistribution checked from plenumNot checked
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

Testing and commissioning in cities near Riyadh

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Riyadh

What sets this city apart

Large villas and residential compounds in Riyadh need precise testing to confirm even distribution across all rooms, and multi-storey offices and commercial buildings require checking every floor and zone separately. Riyadh's intense summer heat makes it vital to verify duct insulation and joint seals before actual operation, and the dust means careful cleaning of filters and grilles.

Riyadh is the capital on the Najd plateau with a hot dry desert climate and summers of extreme heat, built with villas, office towers and residential compounds.

In Riyadh villas and commercial buildings the air distribution to every room is tested and the damper or thermostat adjusted so each space reaches the desired temperature.

All our services in Riyadh

The AC setup in Riyadh

  1. 1

    Temperature readings in each room

    We measure temperature at every outlet and room centre, then adjust dampers until all spaces reach the target temperature uniformly.

  2. 2

    Pressure and leak testing

    We test the system at high pressure before refrigerant charge, inspecting all joints, duct and copper for leaks, especially in concealed ceilings and sun-protected runs.

  3. 3

    Control and thermostat settings

    We test all controls and thermostats, set desired temperatures and schedules, and give you a handover record documenting all settings and readings.

Before the visit

Before our visit in Riyadh

  1. 1

    Send the drawings and photos

    Send complete drawings and photos of outlets and runs so we plan testing based on design and actual layout.

  2. 2

    Prepare the building for testing

    Ensure all doors and windows are closed before testing, and tell us any schedule or temperature changes you need.

  3. 3

    Arrange access to all spaces

    Confirm we can access all rooms, floors, roofs and unconditioned spaces where duct or copper runs so we can take all readings and checks.

FAQ

Questions about Testing and commissioning

What is the difference between installation and commissioning?

Installation means fitting and connecting the parts. Commissioning comes after, to confirm that what was fitted works as designed: the line is tight, air reaches every room in the right quantity and the thermostat controls accurately. The two stages are different and neither replaces the other.

Does a small building need full commissioning?

Building size does not decide whether commissioning is needed. Even in a small flat or villa there may be a refrigerant leak or a damper that leaves one room far colder than another. The site and the system design decide the scope of testing required, and that becomes clear at the survey.

Why do you rely on a stable vacuum reading rather than a fixed time?

The amount of vapour trapped in a refrigerant line varies from one site to another depending on the building's conditions and its city's climate. Vapour left in the line gradually strains the compressor and weakens cooling. We therefore run the vacuum pump until the reading reaches a stable level, and only then open the refrigerant.

What if one room is still warmer after commissioning?

We go back to the air temperature at that room's outlets, check the damper and the flexible duct that feed it, and confirm the air outlet suits the room's size. Adjusting the damper is usually enough; if the cause lies in the system design itself, we explain the right solution before any further work.

Do flexible duct connections need checking during commissioning?

Yes. A flexible duct connecting a rigid duct run to an air outlet can crack or partly detach during installation without being obvious. That gap reduces air reaching the room and makes balancing readings unreliable. The technician therefore inspects every flexible duct connection before measuring airflow at the outlets.

Is testing and commissioning needed after installation in Riyadh?

Yes, essential. We check pressure, leaks, vacuum and grounding, start the system and verify temperature and airflow at each outlet, recording results in the handover record.

How long does testing and commissioning take in a Riyadh office building?

Duration depends on system size, floor count and outlet numbers, set after we see the site and drawings. We agree the commissioning date in the quote and coordinate with site management.

Does Riyadh dust affect testing and commissioning?

Dust requires filter and grille cleaning before testing, and we verify tight joints so no dust enters during operation and readings.

Do we need to cut the power when testing and commissioning?

Yes, we cut power for grounding, insulation and vacuum checks, then restore it to run the system and measure pressure, temperature and airflow after confirming all connections are safe.

Hand over your system after a full test

WhatsApp a brief description of the system and building type, or call us, and we will arrange the survey and commissioning visit, Saturday to Thursday.

CallWhatsApp