Tower and office building HVAC in Al Nuzlah Al Sharqiyah, Jeddah
Tower and office building HVAC in Al Nuzlah Al Sharqiyah demands a central system distributing cooled air from the plant room through vertical risers to each floor, with independent control for every tenant unaffected by neighbours' changes. Alrabih designs these systems to suit the modern buildings and open access typical of this southern district.
4.9 on Google- Zone control
- Vertical risers
- Per-floor zoning
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When your building needs a specialist contractor
- 1
New office tower under construction
The hardest part is coordinating with the main contractor: fixing riser shafts and floor penetrations before concrete is poured, locating plant rooms on the right floors, and documenting everything before walls are closed.
- 2
Existing building needing a system upgrade
The old system no longer serves the current tenant load, energy losses are high, or some floors stay warm in Jeddah's humid heat with no one knowing where the fault starts. A detailed survey identifies the path forward.
- 3
New tenant redesigning their floor
Moving partition walls means relocating air outlets and dampers for every new office. A zone designed carefully lets you add the tenant without upsetting the air balance across the rest of the building.
Who it's for
Your office tower is under construction now
We coordinate with the main contractor to fix riser shafts, floor penetrations and plant room positions before walls are closed and concrete is poured.
Ask on WhatsAppYou manage an occupied office building with complaints
We survey the existing network floor by floor, identify why airflow is unbalanced across zones, and carry out corrections in phases without cutting cooling to neighbouring offices.
Ask on WhatsApp
What the job covers
What our scope covers
- Duct network design
- G90 sheet to SMACNA
- Zone layout and dampers
- Flexible connections and plenums
- Commissioning and air balancing
How we work
How we work
- 1
Survey and drawing review
We visit the site and review the architectural and structural drawings, fixing riser routes, plant room positions and floor penetrations in coordination with the project team.
- 2
Design and zone layout
We design the duct network, assign zones per floor and tenant, and set duct sizes, damper positions and plenum box locations for every branch.
- 3
Duct fabrication and installation
We fabricate ducts in our workshop from G90 galvanized sheet to SMACNA standards, insulate them with glass-wool, and install floor by floor in coordination with other contractors on site.
- 4
Balancing and handover
After start-up we balance airflow across all air outlets, verify each thermostat responds correctly, and hand the as-built drawings to the building management.
Why Alrabih?
Integrated design or unplanned expansion?
| Alrabih | The usual way | |
|---|---|---|
| Zone layout | Designed per floor and tenant | Estimated without design |
| Ductwork | Fabricated to calculated sizes | Random sizes used |
| Dampers | On every branch for control | Fitted where convenient |
| As-built record | Final drawings handed over | No record after handover |
| Riser insulation | Glass-wool stops condensation | Insulation skipped |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Nuzlah Al Sharqiyah's office buildings are relatively modern, sitting on larger plots than downtown, so long, straight duct runs from ground floor to tower top are feasible. The open spaces and wide corridors make installing ducts and flexible connections simpler, but coastal humidity and dust drifting from the south and east call for robust glass-wool insulation around every duct to shield the system from condensation and corrosion.
Al Nuzlah Al Sharqiyah in south Jeddah is an area of modern, spaced-out buildings with commercial spaces and open plots.
Central HVAC systems in these towers rely on one or two plant rooms on the roof or ground floor, with thermostats in each zone to deliver independent control.
The AC setup in Al Nuzlah Al Sharqiyah
- 1
Central plant room on the roof
Most office towers here place the chillers and fans on the roof, with main ducts running vertically down to each floor through the structural columns and bearing walls.
- 2
Horizontal ducts in the corridors
From the main vertical duct, smaller horizontal ducts branch inside the floor corridors to each office zone, with flexible connections to reduce vibration.
- 3
Air distribution rooms on each floor
Larger buildings may need separate duct rooms on each floor for dampers and controls, especially if the office space is extensive and requires separate management of multiple zones.
Before the visit
Before our visit in Al Nuzlah Al Sharqiyah
- 1
Confirm access to the roof and plant room
Check that the roof and plant room are safely accessible, with enough space to carry the chillers, fans and piping in.
- 2
Agree the unloading point for equipment and materials
Confirm with the contractor a safe entry route for heavy equipment from the street into the building, and reserve a temporary storage area for materials before they are lifted to the roof.
- 3
Bring building plans and duct layouts
Before the visit, have the floor plans for each level and the proposed duct layouts ready, so the team can assess the runs, corridors and mounting points for the air outlets.
More districts for Tower and office building HVAC
Other services in Al Nuzlah Al Sharqiyah
FAQ
Questions about Tower and office building HVAC
How does each tenant control their own temperature independently?
Each floor or zone is fed from its own plenum box, a damper controls the volume of air entering, and the thermostat sets the required temperature. This layout lets each tenant adjust their space without affecting the floors above or below.
Do tenant fit-out works affect cooling on other floors?
When the system is designed with independent zones, redistributing outlets or moving dampers inside one floor stays isolated from the rest of the building. We review the revised layout and rebalance that zone before the tenant moves in.
How does Jeddah's humidity affect duct design in towers?
High humidity means outdoor air carries a greater moisture load, which feeds into duct sizing and treated air volumes. Risers near the facade also need thorough glass-wool insulation to stop condensation forming on the duct surface inside the building.
Can you work while the building is occupied?
Yes, and that requires phasing the work floor by floor or wing by wing so cooling is never cut to neighbouring offices. We agree a programme with building management before starting and identify at the survey which sections can be isolated without disrupting daily operations.
How is cooling managed for the tower lobby and car park?
The lobby and car park have different requirements from office floors: ceiling heights differ, heat loads vary and ventilation needs change. The lobby needs diffusers suited to tall spaces, while the car park requires mechanical ventilation working alongside the cooling. The site survey determines the right design for each space.
How are air outlets distributed across the floors in a modern office tower?
Each floor connects to a plenum box receiving air from the main duct, then dampers distribute air by zone need, and air outlets are placed in ceilings or walls to suit the office layout.
The corridors in Al Nuzlah Al Sharqiyah are wide; does that ease installation?
Yes, the open spaces and wide corridors reduce the need to split ducts into small sections and make it easy to carry equipment and flexible connections from the ground floor to the plant room.
Does humidity and dust from the south affect the glass-wool insulation in the ducts?
Coastal humidity speeds up condensation on ducts, and high-density glass-wool insulation protects them from corrosion and moisture. We ensure full, intact coverage of insulation on every duct during installation.
How does the thermostat keep each tenant independent?
Each zone or floor has its own thermostat controlling its dampers, so if one tenant adjusts the temperature, the other floors remain unaffected.


























































































