University HVAC in Al Baha, Al Baha Region
University HVAC in Al Baha takes into account the mild climate and mountain elevation that define the city. Based in Jeddah, we supply and coordinate installing central systems and duct across multiple campus buildings, scheduling major works during the break between academic terms.
4.9 on Google- Hall fresh air
- Zone control
- Break scheduling
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When the campus needs a specialist
- 1
Halls whose loads change fast
A lecture hall goes from empty to full in minutes and the heat load jumps suddenly. A system sized for a steady load cannot handle this swing, so the compressor labours or the air fails to reach the back rows.
- 2
Many buildings and scattered systems
A campus holds buildings with systems of different ages and types. Without coordination, energy use rises and maintenance becomes difficult. We assess what is there in the survey and propose the right solution building by building.
- 3
Labs that need controlled air and pressure
A lab needs enough fresh air to dilute fumes, and sometimes a pressure difference between it and the adjacent corridor. The right damper and a carefully designed plenum box are the basis of that control, and any error in them affects the safety of the space and the work done in it.
Who it's for
Building a new university block that needs HVAC design
We design HVAC and ventilation for every hall and lab from scratch, supply ductwork and suitable equipment.
Ask on WhatsAppExisting HVAC systems failing to cool the lecture halls
We survey each building, decide what to replace or repair, and complete all works during the term break.
Ask on WhatsApp
What the job covers
What Alrabih's university work covers
- Design per building
- G90 duct to SMACNA
- Dampers and plenum installation
- Glass wool and Kingspan insulation
- Thermostat setting per zone
How we work
How we work
- 1
Campus survey
We visit every building, note its area, existing system type, air openings and usage schedule, then set intervention priorities and timing before writing any specification.
- 2
Design and specification
We design the ductwork, dampers and plenum boxes for each building, select suitable equipment from our authorised brands, then present the plan to the university administration.
- 3
Works during the break
Major works such as replacing ductwork and fitting equipment are done in the inter-term break, scheduled with the university so each phase finishes before students return.
- 4
Commissioning and handover
We run each system, set the dampers and thermostat for every hall and lab, check that fresh air reaches the back of the halls, then hand the university's technical team the system documentation.
Why Alrabih?
Tailored design or one solution for all?
| Alrabih | The usual way | |
|---|---|---|
| Equipment sizing | Matched to each building's load | Same size for every building |
| Fresh air | Calculated for peak occupancy | Left to natural leakage |
| Hall control | Thermostat per zone | One switch for the building |
| Works timing | Scheduled in the term break | Mid-term disruption |
| Ductwork | Workshop-fabricated to design dimensions | Off-the-shelf standard sizes |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
University HVAC in cities near Al Baha
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Al Baha
What sets this city apart
A university campus in Al Baha spreads across lecture halls, labs, libraries and offices on hillside slopes or raised areas. The mild summers and cool winters mean HVAC systems use less energy than in hot regions, but require design that adapts to seasonal changes and fresh air in crowded halls. Major works run in the long break to avoid disrupting study, and hilly routes need careful planning for safe duct and copper runs.
Al Baha is a highland city in the Al-Bahah Region among juniper forests and terraced mountain villages, with mild summers and cool winters.
A common campus setup in Al Baha is central HVAC systems with lower capacities than in hot regions, with outdoor units on higher building roofs.
The AC setup in Al Baha
- 1
Central systems on sloped terrain
Air-handling units are installed in a central plant building at mid-campus elevation, and duct descends safely to neighbouring buildings on the slopes.
- 2
Indoor units in elevated lecture halls
Indoor units are mounted in ceilings or walls, and air distribution is calculated for even delivery in lecture halls elevated on slopes.
- 3
Outdoor units on high roofs
Outdoor units sit on higher building roofs, where they benefit from better natural ventilation and stay away from moisture pooling in lower areas.
Before the visit
Before our visit in Al Baha
- 1
Prepare campus map and drawings
Send the campus map with elevations and building distances, plus architectural drawings of halls and labs, so we plan safe duct routes across the slopes.
- 2
Confirm elevations and duct routes
With the campus engineer agree outdoor unit elevations and safe routes for duct and copper across slopes, plus any protection needed from seasonal cold and moisture.
- 3
Align schedule with academic break
Tell us the actual break window and hours available for work, where equipment from Jeddah can be unloaded, and safe access routes through mountain roads on campus.
Other services in Al Baha
FAQ
Questions about University HVAC
How do you handle halls that fill and empty quickly?
We calculate the hall load at maximum occupancy and design the ductwork and plenum box to meet that peak, then fit controllable dampers so the system responds quickly to change. The right thermostat for each hall also helps hold a comfortable temperature when occupancy shifts suddenly.
How does local climate affect ventilation design?
Local climate has a direct effect on ventilation design. The fresh air entering large halls carries a latent load that varies with each city's climate. We calculate this load as part of the design based on the building's conditions and its city's climate, so the equipment performs correctly. Outdoor unit materials and coatings are selected according to what the site survey reveals.
Do you make the ductwork on site or in your workshop?
We fabricate ductwork in our own workshop from G90 galvanized sheet to the designed dimensions, and also supply flexible duct connecting the main duct to the air outlets. Workshop fabrication improves dimensional accuracy and reduces time spent on the campus site.
Do you work on existing buildings that need their HVAC updated?
Yes. Many university buildings run on ageing equipment or corroded ductwork. We start with a careful survey of each building to decide what stays and what is replaced, then plan the work by building priority and term break dates so studies are not affected. The type of replacement equipment is decided by the surveyor after the site inspection.
Does a lab need a different air system from a lecture hall?
Usually yes. A lab needs enough fresh air to dilute fumes, and may need a pressure difference between it and the corridor. We set the exact requirement at the site survey according to the lab type and use, then adjust the dampers and design the air system to hold it steadily.
How does university HVAC in Al Baha differ from hot regions?
Mild weather in Al Baha reduces cooling load, but seasonal swings between moderate summers and cool winters call for a flexible system that balances heating and cooling. Fresh air remains vital in crowded lecture halls.
How does duct made in Jeddah reach multiple buildings on Al Baha's slopes?
We coordinate with you on each system route and outdoor unit placement on higher building roofs, fabricate the duct to approved sizes, transport it through campus roads, and install and test in the agreed break window.
Does Al Baha's cool winter weather affect duct design and insulation?
Cool winters do not require thick insulation like hot regions, but duct crossing outside buildings needs protection from cold and moisture. We choose thickness and treatment based on the duct route and site elevation.
When should major HVAC works begin at a university campus in Al Baha?
Major works are carried out in the long break between terms to avoid disrupting study. We need advance confirmation of dates and where equipment and duct can be stored on campus, especially given the hilly distances.


























































































