University HVAC in Al Rughamah (Abraq Al Rughamah), Jeddah
In Al Rughamah, east Jeddah, university HVAC faces a challenge: widely spaced buildings need strong cooling systems with long duct runs. Alrabih carefully assesses each building's location and selects outdoor units and ductwork by distance and the district's hot, humid conditions.
4.9 on Google- Hall fresh air
- Zone control
- Break scheduling
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When the campus needs a specialist
- 1
Halls whose loads change fast
A lecture hall goes from empty to full in minutes, and heat load and humidity jump suddenly. A system sized for a steady load cannot handle this swing, so the compressor labours or the air fails to reach the back rows.
- 2
Many buildings and scattered systems
A campus holds buildings with systems of different ages and types. Without coordination, energy use rises and maintenance becomes difficult. We assess what is there in the survey and propose the right solution building by building.
- 3
Labs that need controlled air and pressure
A lab needs enough fresh air to dilute fumes, and sometimes a pressure difference between it and the adjacent corridor. The right damper and a carefully designed plenum box are the basis of that control, and any error in them affects the safety of the space and the work done in it.
Who it's for
Building a new university block that needs HVAC design
We design HVAC and ventilation for every hall and lab from scratch, supply ductwork and suitable equipment.
Ask on WhatsAppExisting HVAC systems failing to cool the lecture halls
We survey each building, decide what to replace or repair, and complete all works during the term break.
Ask on WhatsApp
What the job covers
What Alrabih's university work covers
- Design per building
- G90 duct to SMACNA
- Dampers and plenum installation
- Glass wool and Kingspan insulation
- Thermostat setting per zone
How we work
How we work
- 1
Campus survey
We visit every building, note its area, existing system type, air openings and usage schedule, then set intervention priorities and timing before writing any specification.
- 2
Design and specification
We design the ductwork, dampers and plenum boxes for each building, select suitable equipment from our authorised brands, then present the plan to the university administration.
- 3
Works during the break
Major works such as replacing ductwork and fitting equipment are done in the inter-term break, scheduled with the university so each phase finishes before students return.
- 4
Commissioning and handover
We run each system, set the dampers and thermostat for every hall and lab, check that fresh air reaches the back of the halls, then hand the university's technical team the system documentation.
Why Alrabih?
Tailored design or one solution for all?
| Alrabih | The usual way | |
|---|---|---|
| Equipment sizing | Matched to each building's load | Same size for every building |
| Fresh air | Calculated for peak occupancy | Left to natural leakage |
| Hall control | Thermostat per zone | One switch for the building |
| Works timing | Scheduled in the term break | Mid-term disruption |
| Ductwork | Workshop-fabricated to design dimensions | Off-the-shelf standard sizes |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Rughamah has widely spaced university buildings across a large area, meaning long distances from the outdoor unit to indoor ductwork. This spread demands strong glass-wool insulation to prevent heat loss of the cold over long runs, and more powerful airflow from the unit. The extreme heat and humidity here means insulation also guards against heavy condensation on long ductwork. The wide site space allows larger, more powerful outdoor units to compensate for distance, but also means higher costs for ductwork and installation.
Al Rughamah lies in east Jeddah, a district of widely spaced university buildings across large areas with hot, humid climate.
University buildings here need central AC systems with long insulated ductwork, and often use multiple distributed outdoor units to reduce the distance between some buildings.
The AC setup in Al Rughamah (Abraq Al Rughamah)
- 1
Distributed outdoor units to cut distances
Instead of one central unit far away, we install several units closer to building clusters to cut ductwork length and heat loss.
- 2
Ductwork with extra insulation thickness
Long runs need thicker glass-wool insulation to prevent heat loss of the cold and condensation over long distances in high humidity.
- 3
Heavy-duty flexible ducts in open areas
Heavy-duty flexible ducts withstand wind and weather in the open spaces between buildings.
Before the visit
Before our visit in Al Rughamah (Abraq Al Rughamah)
- 1
Measure distances and spaces between all buildings
Use survey tools to pinpoint exact distances and available spaces, including dips and obstacles that might affect the ductwork route.
- 2
Identify outdoor unit locations and duct routes
Choose outdoor unit locations based on distances, such as near the gate or amid building clusters. Map ductwork routes on the site plan.
- 3
Agree installation, isolation and maintenance schedule
Discuss with the university suitable periods for works and maintenance, especially added insulation and periodic checks of long ductwork.
More districts for University HVAC
Other services in Al Rughamah (Abraq Al Rughamah)
FAQ
Questions about University HVAC
How do you handle halls that fill and empty quickly?
We calculate the hall load at maximum occupancy and design the ductwork and plenum box to meet that peak, then fit controllable dampers so the system responds quickly to change. The right thermostat for each hall also helps hold a comfortable temperature when occupancy shifts suddenly.
Does Jeddah's coastal climate affect ventilation design?
Yes. Jeddah's high humidity means the fresh air entering large halls carries a heavy latent load. We include this in the design so the equipment can dehumidify adequately. The salt in the sea air also means outdoor units need materials and coatings suited to a coastal environment.
Do you make the ductwork on site or in your workshop?
We fabricate ductwork in our own workshop from G90 galvanized sheet to the designed dimensions, and also supply flexible duct connecting the main duct to the air outlets. Workshop fabrication improves dimensional accuracy and reduces time spent on the campus site.
Do you work on existing buildings that need their HVAC updated?
Yes. Many university buildings run on ageing equipment or corroded ductwork. We start with a careful survey of each building to decide what stays and what is replaced, then plan the work by building priority and term break dates so studies are not affected. The type of replacement equipment is decided by the surveyor after the site inspection.
Does a lab need a different air system from a lecture hall?
Usually yes. A lab needs enough fresh air to dilute fumes, and may need a pressure difference between it and the corridor. We set the exact requirement at the site survey according to the lab type and use, then adjust the dampers and design the air system to hold it steadily.
The long distances between buildings, how do you handle them?
We calculate heat loss over long distances and specify stronger units than usual. We insulate ductwork with thicker glass-wool, and consider multiple outdoor units to reduce run lengths.
The wide open spaces, how do you run ductwork from unit to buildings?
We plan the ductwork route to have weather protection and stability. Ducts may be mounted on ground supports or new structures for outdoor units, and we protect connections from damage and leaks.
High humidity plus long ductwork, does that increase condensation?
Yes, which is why we use thick glass-wool to prevent condensation on the ductwork's outer surface. High-efficiency filters prevent excess humidity from entering the ducts from the start.
Multiple units or one powerful unit for long distances?
It depends on the number and location of buildings. Multiple units are usually cheaper and easier to maintain, as they spread the load and cut run lengths. We choose the best option after surveying the site with the engineer.


























































































