University HVAC in Madinah, Madinah Region

University HVAC in Madinah serves lecture halls, classrooms and labs, and the university may be on a plateau or spread across several areas. The design accounts for hot summers and mild winters, with installation during breaks that do not disrupt studies, usually over university holidays.

4.9 on Google
  • Hall fresh air
  • Zone control
  • Break scheduling

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When the campus needs a specialist

  1. 1

    Halls whose loads change fast

    A lecture hall goes from empty to full in minutes and the heat load jumps suddenly. A system sized for a steady load cannot handle this swing, so the compressor labours or the air fails to reach the back rows.

  2. 2

    Many buildings and scattered systems

    A campus holds buildings with systems of different ages and types. Without coordination, energy use rises and maintenance becomes difficult. We assess what is there in the survey and propose the right solution building by building.

  3. 3

    Labs that need controlled air and pressure

    A lab needs enough fresh air to dilute fumes, and sometimes a pressure difference between it and the adjacent corridor. The right damper and a carefully designed plenum box are the basis of that control, and any error in them affects the safety of the space and the work done in it.

Who it's for

  • Building a new university block that needs HVAC design

    We design HVAC and ventilation for every hall and lab from scratch, supply ductwork and suitable equipment.

    Ask on WhatsApp
  • Existing HVAC systems failing to cool the lecture halls

    We survey each building, decide what to replace or repair, and complete all works during the term break.

    Ask on WhatsApp

What the job covers

What Alrabih's university work covers

  • Design per building
  • G90 duct to SMACNA
  • Dampers and plenum installation
  • Glass wool and Kingspan insulation
  • Thermostat setting per zone
Request a quote

How we work

How we work

  1. 1

    Campus survey

    We visit every building, note its area, existing system type, air openings and usage schedule, then set intervention priorities and timing before writing any specification.

  2. 2

    Design and specification

    We design the ductwork, dampers and plenum boxes for each building, select suitable equipment from our authorised brands, then present the plan to the university administration.

  3. 3

    Works during the break

    Major works such as replacing ductwork and fitting equipment are done in the inter-term break, scheduled with the university so each phase finishes before students return.

  4. 4

    Commissioning and handover

    We run each system, set the dampers and thermostat for every hall and lab, check that fresh air reaches the back of the halls, then hand the university's technical team the system documentation.

Start with step one

Why Alrabih?

Tailored design or one solution for all?

AlrabihThe usual way
Equipment sizingMatched to each building's loadSame size for every building
Fresh airCalculated for peak occupancyLeft to natural leakage
Hall controlThermostat per zoneOne switch for the building
Works timingScheduled in the term breakMid-term disruption
DuctworkWorkshop-fabricated to design dimensionsOff-the-shelf standard sizes
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

University HVAC in cities near Madinah

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Madinah

What sets this city apart

Madinah universities sprawl across a plateau with relatively flat terrain, combining modern buildings: residential villas, lecture halls, classrooms, labs, libraries and student housing. Summers are hot and dry, winters mild and cool, so the system needs strong cooling in summer and reliable heating in winter. Installation is phased, typically beginning at the end of one semester and finishing before the next term starts.

Madinah stands on a plateau in the Medina Region, surrounded by volcanic basalt fields and palm groves. The climate is hot and dry in summer, mild and relatively cool in winter.

HVAC systems in Madinah universities typically combine strong summer cooling and winter heating, with separate distribution units for each building.

All our services in Madinah

The AC setup in Madinah

  1. 1

    Separate distribution units for each building

    Each building or cluster of nearby buildings has its own distribution unit, easing independent control and maintenance.

  2. 2

    Reliable heating for the cool winter season

    Systems include adequate heating for the relatively cool winter, especially in classrooms, libraries and student housing.

  3. 3

    Strong duct insulation in central systems

    If the university uses a central system, duct insulation is strong to maintain temperatures over long runs from the air source to distant buildings.

Before the visit

Before our visit in Madinah

  1. 1

    Send campus map and engineering drawings

    Send a map showing building distribution across the plateau and complete engineering drawings for each building or sector.

  2. 2

    Define installation phases and handover dates

    Agree which buildings are installed first and the completion date for each phase, so each section is ready before classes begin.

  3. 3

    Provide campus access and facilities

    Give us the project manager's contact and show where equipment can be unloaded and temporarily stored on the plateau during installation.

FAQ

Questions about University HVAC

How do you handle halls that fill and empty quickly?

We calculate the hall load at maximum occupancy and design the ductwork and plenum box to meet that peak, then fit controllable dampers so the system responds quickly to change. The right thermostat for each hall also helps hold a comfortable temperature when occupancy shifts suddenly.

How does local climate affect ventilation design?

Local climate has a direct effect on ventilation design. The fresh air entering large halls carries a latent load that varies with each city's climate. We calculate this load as part of the design based on the building's conditions and its city's climate, so the equipment performs correctly. Outdoor unit materials and coatings are selected according to what the site survey reveals.

Do you make the ductwork on site or in your workshop?

We fabricate ductwork in our own workshop from G90 galvanized sheet to the designed dimensions, and also supply flexible duct connecting the main duct to the air outlets. Workshop fabrication improves dimensional accuracy and reduces time spent on the campus site.

Do you work on existing buildings that need their HVAC updated?

Yes. Many university buildings run on ageing equipment or corroded ductwork. We start with a careful survey of each building to decide what stays and what is replaced, then plan the work by building priority and term break dates so studies are not affected. The type of replacement equipment is decided by the surveyor after the site inspection.

Does a lab need a different air system from a lecture hall?

Usually yes. A lab needs enough fresh air to dilute fumes, and may need a pressure difference between it and the corridor. We set the exact requirement at the site survey according to the lab type and use, then adjust the dampers and design the air system to hold it steadily.

How do you design the system for temperature swings between summer and winter?

We study each building's characteristics and expected use, calculate summer cooling and winter heating loads separately, and select flexible units that switch easily between cooling and heating by season.

How do you coordinate installation with the academic calendar?

We align our work schedule with the university's semester breaks, starting work as one term ends and finishing before the next term starts, without disrupting classes.

Do the volcanic terrain and climate affect your component choices?

Volcanic terrain means solid ground that makes robust outdoor unit installation easier. Variable weather calls for strong, reliable units and good duct insulation, which we address in design and selection.

Do you include periodic maintenance after handover?

Handover includes full system documentation and training for the university's team on basic operation. We provide a recommended maintenance schedule; the university maintains the system after handover.

Start with a campus survey

Contact us on WhatsApp or by phone to arrange a survey of your buildings, Saturday to Thursday, 8 am to 8 pm.

CallWhatsApp