Ventilation and exhaust systems in Al Marsa, Jeddah
In Al Marsa on Jeddah's southern coast, port-related offices, seaside hotels and storage facilities need robust ventilation to maintain air quality. Alrabih designs and installs ventilation and exhaust systems from G90 galvanized sheet built to resist coastal salt and humidity.
4.9 on Google- Effective exhaust
- Balanced flow
- Fresh air in
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When you need a dedicated ventilation system
- 1
Smell or moisture that does not clear
In a commercial kitchen, laundry or toilet block, steam and smells build up because stale air has nowhere to go. A properly designed exhaust system removes them at the source rather than just recirculating heavy air around the space.
- 2
A plant room or workshop that overheats
Electrical equipment and motors generate heat that shortens their life if it stays trapped. Mechanical ventilation draws hot air out from the top and brings cooler air in at a chosen point, keeping the operating temperature within a safe range.
- 3
A car park or crowded prayer hall
Exhaust fumes in enclosed car parks and carbon dioxide in large halls cannot be handled by cooling alone. The right system depends on the space and layout, and we plan the duct route and intake and exhaust points after a site survey.
Who it's for
Running a commercial kitchen with persistent steam and smells
We survey the kitchen, design an exhaust system with galvanized duct and balancing dampers that remove steam and smells at the source, and bring fresh air in from a separate intake point.
Ask on WhatsAppBuilding a warehouse or workshop that needs mechanical ventilation
We design the duct route and intake and exhaust positions during the construction phase, so the network is installed in the right place before ceilings and walls are finished.
Ask on WhatsApp
What the job covers
What the installation covers
- G90 galvanised sheet ducts
- dampers for flow balancing
- flexible connections at fans
- separate intake and exhaust points
- ducts insulated with glass wool
How we work
How we work
- 1
Site survey and requirements
We visit the site and note heat sources, smells, moisture and available duct routes, then fix intake and exhaust points so that expelled air cannot be drawn back into the building.
- 2
System and route design
We draw the duct route, damper and fan positions, and confirm that every space receives its share of air as the site demands.
- 3
Duct fabrication and installation
We fabricate the duct in our workshop from G90 galvanized sheet from SABIC to the site dimensions, then hang, insulate and connect it with flexible duct at the fans to reduce vibration.
- 4
Balancing and handover
After installation we adjust the dampers until flow is distributed at the right proportion through each outlet, then hand over the system with a one-year warranty.
Why Alrabih?
A designed system or just a hanging fan?
| Alrabih | The usual way | |
|---|---|---|
| Intake and exhaust points | Separate and positioned carefully | Uncoordinated, exhaust re-enters |
| Flow distribution | Dampers balance every space | Some spaces starved, others overloaded |
| Ductwork | G90 galvanized sheet from SABIC | Mixed or makeshift materials |
| Make-up air | Accounted for in the design | Ignored so fans lose pressure |
| Duct insulation | Glass wool fitted carefully | Skipped so moisture condenses |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Marsa is a dense coastal zone with shipping offices, logistics services, small hotels and port-adjacent warehouses, where buildings mix older and newer styles. Ventilation systems here need short, quick-install duct runs because space is tight and building designs vary widely, and draining the condensation from the difference between outside coastal heat and indoor cooling is critical. High salt content and constant humidity demand heavy-gauge G90 galvanized sheet and superior insulation to ensure long system life.
Al Marsa sits on Jeddah's southern coast, a mixed-use zone with administrative buildings, small hotels and warehouses close to port activity.
Most coastal buildings in Al Marsa need vapour barriers and precise condensation drainage on external duct because of persistent humidity and salt.
The AC setup in Al Marsa
- 1
Plenum box inside the building
The plenum box usually sits in a low or intermediate space due to tight coastal building layouts, with safe condensation drainage to outside.
- 2
Flexible duct at narrow transitions
Tight spaces between floors and walls take flexible duct instead of rigid duct, making installation and later maintenance easier.
- 3
Vapour barriers on external duct
All duct sections that run outside the building are wrapped with moisture-blocking films to prevent seepage of salt and humidity from coastal air.
Before the visit
Before our visit in Al Marsa
- 1
Get the electrical and plumbing plans
Provide precise maps of existing electrical and water runs to avoid clashes with new duct paths.
- 2
Confirm the external drainage point
Identify a safe and practical location for condensation drainage outside the building, away from electrical equipment and the main entrance.
- 3
Agree installation timing with building management
Coordinate with management to ensure installation does not disrupt office or hotel operations, especially during busy seasons.
More districts for Ventilation and exhaust systems
Other services in Al Marsa
FAQ
Questions about Ventilation and exhaust systems
Does Jeddah's salty air affect ventilation ductwork?
Yes, Jeddah's humid, salt-laden air accelerates corrosion in low-grade sheet. We use G90 galvanized sheet from SABIC whose zinc coating resists the moisture and salinity. Outdoor intake points are positioned after the survey to avoid direct exposure to sea winds.
Can ventilation be added to an existing building without demolition?
In many cases yes. At the survey we check the space above false ceilings and possible routes through service areas. Some buildings allow a full run; others need alternative routes that we explain before work starts. The site decides.
What is the difference between natural and mechanical ventilation?
Natural ventilation relies on pressure differences, heat and facade openings, and it weakens on the hot, humid days that are common in Jeddah. Mechanical ventilation uses fans and duct that work regardless of weather, making it the right choice for kitchens, car parks and plant rooms.
Do you install ventilation systems in large and government projects?
Yes, we work on residential, commercial, industrial and government buildings across all districts of Jeddah. Project size affects pricing: we offer discounts by quantity and project size, and competitive prices across all works. Contact us with your project details and we will arrange a survey.
How do you make sure expelled air does not re-enter the building?
At the survey we note the prevailing wind direction and the positions of nearby openings, then separate the intake point from the exhaust point by a suitable distance and height. That separation is what prevents expelled air from circulating back into the space, and the conditions at each site decide the right arrangement.
Does coastal salt affect duct durability?
Yes, salt and moisture speed corrosion in ordinary metals. We use heavy G90 galvanized sheet and install vapour barriers to protect the interior from humidity and salt.
Are Al Marsa's coastal buildings tight for duct installation?
Some older buildings are indeed tight, so we use flexible duct in confined spaces and coordinate with the owner on plenum box and outlet locations.
How is condensation from external duct managed on the coast?
We design ducts with a gentle slope toward a single drain point and fit drainage pipes with adequate diameter to pull condensation away from the duct and building.
Do external duct connections need special insulation on the coast?
Yes, we wrap with reflective aluminium-faced glass-wool insulation to cut heat loss and moisture uptake, which protects the duct from fast corrosion.


























































































