Home and villa cooling
Villa & home HVAC in Al Faisaliyah
Villa HVAC in Al Faisaliyah requires a design that balances wide living spaces with isolated private rooms. Alrabih's team selects the right cooling system for each floor and space, concealing outdoor units so the facade remains uncluttered.
- Balanced cooling
- Quiet bedrooms
- Clean facade
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When you need a villa HVAC specialist
- 1
A new villa before finishing
The finishing stage is the right time to plan the cooling before walls and ceilings close. We decide the system type for each floor and the pipe routes, saving you from cutting and drilling later.
- 2
A large majlis that never feels cool
Large sitting rooms need a different approach from ordinary rooms. Ceiling height, number of openings and sun direction in Jeddah all affect the choice, and the site survey is what decides the right solution.
- 3
Old noisy units disturbing sleep
AC noise in a bedroom breaks sleep and wears on the family. Choosing the right system and placing it correctly gives the room the cooling it needs without sound that disturbs you or the people sleeping near you.
Who it's for
Living in a villa and replacing old systems
We study what is already in your villa floor by floor and propose systems that fix noise and uneven cooling without unnecessary cutting through finished walls.
Ask on WhatsAppBuilding a home and need the cooling planned now
We come in during the finishing stage before ceilings and walls close, laying out pipe routes and choosing the right system for each floor so you face no drilling through completed work later.
Ask on WhatsApp
What our villa work covers
- Survey each floor choose system
- Position outdoor units carefully
- Cool majlis rooms and bedrooms
- Coordinate pipe runs with finishes
- Preventive and corrective maintenance
How we work
How we work
- 1
Full villa survey
Our team visits every floor, studying sun exposure, ceiling heights, room count and how each space is used, before we suggest any system.
- 2
A cooling plan floor by floor
We produce a plan that names the system type for each zone, the indoor and outdoor unit positions, and how the work fits around any finishing trades already on site.
- 3
Installation and pipe runs
We install the agreed systems floor by floor, run insulated copper and drain lines, vacuum each line before start-up, and confirm that units near bedrooms run quietly.
- 4
Handover and maintenance contract
We start every unit with you present and check cooling in each room, then offer a preventive and corrective maintenance contract to keep the whole system performing through the summer.
A full plan or one unit at a time?
| Alrabih | The usual way | |
|---|---|---|
| System choice | Matched to each space | Same type everywhere |
| Facade | Units placed with care | Units visible on the front |
| Bedrooms | Quiet planned from the start | Noise found after fitting |
| Maintenance | One contractor for all | A different contractor per unit |
| Pipe runs | Coordinated with finishes from the start | Exposed pipes or later drilling |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Faisaliyah villas are relatively modern, designed with multiple storeys, spacious majlis areas, separate bedrooms and sometimes an independent lower wing. Each space has different cooling needs: the majlis requires high cooling capacity for gatherings, while bedrooms need quiet cooling at night. This diversity calls for a multi-unit split system or central ducted AC with separate control per zone, and running copper lines and ducts across different floors requires careful planning before construction or renovation.
Al Faisaliyah sits in central Jeddah, a district of modern, well-spaced villas with wide frontages and private gardens.
Most Al Faisaliyah villas use multi-head split systems or central ducted AC, because the living spaces are spread across several storeys.
The AC setup in Al Faisaliyah
- 1
Multi-head split system
The most flexible option for multi-storey villas, allowing one indoor unit per space with one or two outdoor units depending on total load.
- 2
Central ducted AC with separate dampers
A centralized ductwork system covering the whole villa with valve controls for air distribution per storey or zone, suited to villas pre-designed for central cooling.
- 3
Separate split sets for independent wings
If the villa has an independent lower wing or guest flat, a separate cooling system can be provided easily without affecting the main house operation.
Before the visit
Before our visit in Al Faisaliyah
- 1
Provide a villa floor plan or aerial photo
Send us the villa floor plan or an aerial photo so we understand the space layout and floor distribution, helping us calculate cooling needs accurately.
- 2
Agree on copper and ductwork routes
Agree with us on where the copper pipes and ducts will run through walls and floors to prevent any surprises during installation.
- 3
Pre-select outdoor unit locations
You and the team agree on the best outdoor unit locations (garden, side, roof) away from the front facade and safe from weather exposure.
More districts for Villa & home HVAC
Other services in Al Faisaliyah
FAQ
Questions about Villa & home HVAC
Should I use central AC or a split for each room?
There is no single answer that suits every villa. One floor with rooms close together may suit a concealed central system, while separate floors or spread-out rooms often work better with individual splits. The site survey is what decides the right fit for your space and how you use it.
How do you keep the facade tidy with outdoor units on it?
At the survey we look at every option: the roof, the back or side of the building, and ventilation shafts. We choose a spot that gives the unit enough air and is easy to reach for servicing, without putting outdoor units on the main front or creating noise in the street.
How do Jeddah's dust, humidity and salty sea air affect a home system?
Humid, salty air affects heat exchangers and exposed outdoor units over time, and dust blocks filters faster than in dry climates. We take this into account when placing outdoor units away from direct sea winds, and a preventive maintenance contract catches that build-up before it hurts performance.
Do you handle both installation and maintenance for the whole villa?
Yes, we handle design and installation and then offer a preventive and corrective maintenance contract covering every system in the villa. Having one contractor who knows what was installed makes any later servicing or repair faster and more accurate, and you never have to explain each unit's history to someone new.
How do you decide between a concealed unit and a visible split for a room?
The decision depends on ceiling height, the type of finish and the building stage. A room with a high ceiling and generous floor area may accept a concealed cassette, while a small room with a low ceiling or a fully finished space often suits a visible split. Where the outlet sits also affects how air reaches every corner, and the site survey is what settles the choice.
My majlis is very large, will one split unit be enough?
It depends on the exact majlis size and the number of people who gather there. We visit the villa, measure the space and calculate the capacity needed before recommending the number of units.
How do you place the outdoor units without spoiling the villa's facade?
We study the villa's design and garden layout beforehand, and relocate units to the rear, side, or mount them on a low roof away from the main view.
Upper rooms get cooler than lower rooms in summer, how can I control this difference?
We install separate thermostats for each storey, or use central ducted AC with adjustable dampers per zone, depending on the villa's layout.
Does running copper lines from the ground floor to the upper storey affect performance?
The impact is minimal if the run is properly installed with adequate insulation. We design the copper path to be as short as possible, in the interior or shade, and choose the pipe diameter based on distance and cooling capacity.












































































