Air outlets and grilles installation in Al Ammariyah, Jeddah

In Al Ammariyah, central Jeddah, fitting air outlets in residential blocks and mixed-use projects depends on understanding older and newer designs. Alrabih's team determines the diffuser, plenum box and duct link on the first site visit.

4.9 on Google
  • Galvanized plenums
  • Flexible duct links
  • Saudi-made grilles

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When your project needs this work

  1. 1

    A duct network awaiting its outlets

    The main duct runs are in place, but the plenum boxes and grilles are not yet fitted. This stage needs its own care: correct sizing for each plenum box and a match between the flexible duct diameter and the grille neck.

  2. 2

    Grilles making noise or staining the ceiling

    A constant air hiss or black marks around a grille point to a problem with the plenum box, the flexible duct link or the outlet angle. In Jeddah's humidity, an unbalanced cold outlet stains the ceiling faster than in a dry climate.

  3. 3

    A new build or an extension

    In new builds and extensions the number and type of air outlets are set at design stage, then the plenum boxes are fabricated from G90 galvanized sheet from SABIC and installed to the approved duct layout.

Who it's for

  • Living in a villa with ductwork in place but no outlets yet

    We survey each branch point, fabricate the plenum boxes and fit the right grilles for each room.

    Ask on WhatsApp
  • Managing a commercial building with noisy grilles

    We inspect the flexible duct links and plenum boxes and correct the cause of the noise and ceiling staining.

    Ask on WhatsApp

What the job covers

What the work covers

  • Fabricating insulated plenum boxes
  • Supplying and fitting flexible ducts
  • Supplying Saudi-made air grilles
  • Fitting dampers inside plenums
  • Setting grilles and airflow
Request a quote

How we work

How we work

  1. 1

    Site survey and outlet sizing

    The technician visits the site, measures each branch point in the duct network, and decides the grille type and flexible duct diameter suited to the room size and ceiling height.

  2. 2

    Plenum box fabrication

    Plenum boxes are made in our workshop from G90 galvanized sheet from SABIC to the dimensions the survey set, with internal glass-wool insulation fitted before they leave for site.

  3. 3

    Installation and network connection

    Each plenum box is fixed to the main duct branch, and the flexible duct of the correct diameter is connected between it and the ceiling grille opening, with the air damper fitted where the layout requires.

  4. 4

    Balance check and handover

    After the system is running, the technician sets the grille vanes and air dampers and checks that cooling is distributed evenly across the space before handover, with a one-year warranty.

Start with step one

Why Alrabih?

A calculated fit or a quick connection?

AlrabihThe usual way
Plenum boxMade to size with internal insulationStandard size, may not fit
Flexible ductDiameter matched to each outletOne diameter throughout
GrilleType and size for the roomWhatever is in stock
Air damperFitted where the layout requiresOmitted or closed off
Internal insulationFitted in workshop before installAdded on site or omitted
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

Al Ammariyah mixes older and mid-age residential blocks with some newer buildings, flats above shops and offices on lower floors. Older designs often lack adequate ceiling void or a plant room, but relatively newer blocks have suspended ceilings and modern layouts. This means fitting air outlets needs careful assessment of each building before sizing the plenum box and ducts.

Al Ammariyah sits in central Jeddah, a district of mixed-age residential blocks with interspersed shops, flats and offices.

Older flats here may rely on separate split units, while newer flats in modern blocks may use central AC with ductwork.

The AC setup in Al Ammariyah

  1. 1

    Plenum box in tight ceiling voids

    Older and mid-age blocks in Al Ammariyah may have narrow voids between the internal ceiling and structure above. The plenum box design adjusts to this exact space and fits the tight height.

  2. 2

    Short flexible ducts amid closely built blocks

    Short distances between the plenum box and outlets in these flats mean shorter ducts, which simplifies fitting but requires precision in choosing the right diameter.

  3. 3

    Diffusers matched to lower flat ceilings

    Ceilings in flats in older blocks are lower than villas, so the fitted diffusers must be compact and not protrude to ensure aesthetic appearance and effective air distribution.

Before the visit

Before our visit in Al Ammariyah

  1. 1

    Measure the ceiling void height accurately before the visit

    The height of the void between the internal ceiling and structure determines the plenum box size and duct placement. Measure this height at several points in the flat and tell us the figures.

  2. 2

    Coordinate with the shop owner below the flat if present

    If the flat is above a commercial shop, confirm with the shop owner about the fitting date because the plenum box and ducts may require opening or adjusting the shared ceiling.

  3. 3

    Confirm access to the site and equipment clearance

    Some Al Ammariyah streets are narrow. Confirm our team and materials can reach the site, and tell us the nearest parking or unloading point.

FAQ

Questions about Air outlets and grilles installation

What is the difference between a grille and a diffuser, and which suits my room?

A grille directs air in set directions through adjustable vanes and is common in ceilings and walls. A diffuser spreads air in a wide circle along the ceiling and suits open rooms and commercial spaces. The choice between the two depends on room dimensions, ceiling height and plenum position, all of which the technician decides at the site survey.

Why do black marks appear around a grille after a short time?

The usual cause is warm air leaking through a gap in the flexible duct connection or around the plenum box, which meets the cold surface near the grille and deposits dust. Jeddah's high humidity speeds the process up. The fix is sealing the connection and insulating the plenum box properly, not just cleaning the ceiling.

Do you make the plenum boxes yourselves or buy them ready-made?

We make them in our own workshop from G90 galvanized sheet from SABIC to the dimensions the site survey sets for each branch point. Internal glass-wool insulation is fitted in the workshop before each box goes to site. This lets us match the size precisely rather than adapting a standard box that may not suit the opening.

Can extra air outlets be added to an existing duct network?

Yes, within what the existing network capacity and main duct space allow. The technician checks the duct diameter at the proposed branch point and confirms that pressure is sufficient to feed the new outlet without weakening the existing ones. Competitive prices apply, with discounts by quantity and project size.

Does the flexible duct link affect the noise level inside the room?

Yes. A flexible duct link narrower than required speeds the air up and produces an audible whistle. One that is too long or bent at a sharp angle creates turbulent airflow. The technician decides the correct diameter and duct path at the site survey, based on the distance between the plenum box and the grille opening and the room size.

Can duct and plenum box systems be fitted in older blocks in Al Ammariyah?

This depends on ceiling height and whether there is space between the internal ceiling and the structure above. We visit first to measure the available void, and if it is tight, we may suggest an alternative like separate split units instead of a central system.

Are ducts harder to fit in flats above shops in Al Ammariyah than in villas?

Yes, flats above shops need more coordination because the plenum box and ducts may affect the shared ceiling with the shop. We agree arrangements with both the shop and flat owner before starting to avoid disrupting business.

Does Jeddah's humidity and dust damage the glass-wool insulation in the ducts?

Glass-wool insulation is strong and tolerates Jeddah's humidity and heat if it is wrapped in a protective cover. In buildings with industrial dust or near busy streets, we may choose heavier insulation or thicken the outer jacket.

After fitting the plenum box, ducts and outlets, how do you confirm the system is clean?

We test the system by running the AC unit and checking airflow from each outlet, and clear any construction debris or dust that may be in the plenum box or ducts before handover.

The Jeddah corniche in cool weather

Finish your network with the right outlets

Send your duct layout or a site photo on WhatsApp and we will book a survey in your district, Saturday to Thursday, eight in the morning to eight in the evening.

CallWhatsApp