Air outlets and grilles installation in Al Gharbiyah, Jeddah
In Al Gharbiyah, north Jeddah, air outlet installation in residential buildings and mixed-use blocks requires precise coordination between relatively constrained spaces and complex central networks. Alrabih's team checks pressure balance and distribution to ensure no leaks or noise emerge.
4.9 on Google- Galvanized plenums
- Flexible duct links
- Saudi-made grilles
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When your project needs this work
- 1
A duct network awaiting its outlets
The main duct runs are in place, but the plenum boxes and grilles are not yet fitted. This stage needs its own care: correct sizing for each plenum box and a match between the flexible duct diameter and the grille neck.
- 2
Grilles making noise or staining the ceiling
A constant air hiss or black marks around a grille point to a problem with the plenum box, the flexible duct link or the outlet angle. In Jeddah's humidity, an unbalanced cold outlet stains the ceiling faster than in a dry climate.
- 3
A new build or an extension
In new builds and extensions the number and type of air outlets are set at design stage, then the plenum boxes are fabricated from G90 galvanized sheet from SABIC and installed to the approved duct layout.
Who it's for
Living in a villa with ductwork in place but no outlets yet
We survey each branch point, fabricate the plenum boxes and fit the right grilles for each room.
Ask on WhatsAppManaging a commercial building with noisy grilles
We inspect the flexible duct links and plenum boxes and correct the cause of the noise and ceiling staining.
Ask on WhatsApp
What the job covers
What the work covers
- Fabricating insulated plenum boxes
- Supplying and fitting flexible ducts
- Supplying Saudi-made air grilles
- Fitting dampers inside plenums
- Setting grilles and airflow
How we work
How we work
- 1
Site survey and outlet sizing
The technician visits the site, measures each branch point in the duct network, and decides the grille type and flexible duct diameter suited to the room size and ceiling height.
- 2
Plenum box fabrication
Plenum boxes are made in our workshop from G90 galvanized sheet from SABIC to the dimensions the survey set, with internal glass-wool insulation fitted before they leave for site.
- 3
Installation and network connection
Each plenum box is fixed to the main duct branch, and the flexible duct of the correct diameter is connected between it and the ceiling grille opening, with the air damper fitted where the layout requires.
- 4
Balance check and handover
After the system is running, the technician sets the grille vanes and air dampers and checks that cooling is distributed evenly across the space before handover, with a one-year warranty.
Why Alrabih?
A calculated fit or a quick connection?
| Alrabih | The usual way | |
|---|---|---|
| Plenum box | Made to size with internal insulation | Standard size, may not fit |
| Flexible duct | Diameter matched to each outlet | One diameter throughout |
| Grille | Type and size for the room | Whatever is in stock |
| Air damper | Fitted where the layout requires | Omitted or closed off |
| Internal insulation | Fitted in workshop before install | Added on site or omitted |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Gharbiyah comprises a mix of mid-rise apartment buildings and mixed-use blocks with ground-floor shops and flats above, with moderately wide streets. This mix means central duct networks pass through relatively tight shared spaces, and air outlet and flexible duct installation requires careful diameter and position selection to avoid crossing electrical runs or other pipes.
Al Gharbiyah sits in north Jeddah, a district of mixed residential and commercial apartment blocks with regular urban planning.
Medium-rise residential buildings here typically use central cooling units with shared duct runs in corridors and service areas.
The AC setup in Al Gharbiyah
- 1
Shared ductwork in service areas
Most buildings here have central plenum boxes in service rooms, with separate branches running to each flat or shop.
- 2
Diffuser types vary by use
Residential flats need relatively quiet diffusers, whereas commercial shops may need stronger flow and faster distribution.
- 3
Medium-length flexible duct links
Distances from service rooms to flats and shops are typically moderate, so flexible links are in specified diameters with strong fixings.
Before the visit
Before our visit in Al Gharbiyah
- 1
Get the engineering and architectural plans
Ask the contractor for engineering plans of duct runs and architectural plans of the building to pinpoint routes and outlets precisely.
- 2
Confirm access to service rooms
Check that service room doors and passages are open and safely accessible before the work day.
- 3
Coordinate with building management or contractor
Notify management or the contractor of the visit time, especially if work is in shared areas or resident corridors.
More districts for Air outlets and grilles installation
Other services in Al Gharbiyah
FAQ
Questions about Air outlets and grilles installation
What is the difference between a grille and a diffuser, and which suits my room?
A grille directs air in set directions through adjustable vanes and is common in ceilings and walls. A diffuser spreads air in a wide circle along the ceiling and suits open rooms and commercial spaces. The choice between the two depends on room dimensions, ceiling height and plenum position, all of which the technician decides at the site survey.
Why do black marks appear around a grille after a short time?
The usual cause is warm air leaking through a gap in the flexible duct connection or around the plenum box, which meets the cold surface near the grille and deposits dust. Jeddah's high humidity speeds the process up. The fix is sealing the connection and insulating the plenum box properly, not just cleaning the ceiling.
Do you make the plenum boxes yourselves or buy them ready-made?
We make them in our own workshop from G90 galvanized sheet from SABIC to the dimensions the site survey sets for each branch point. Internal glass-wool insulation is fitted in the workshop before each box goes to site. This lets us match the size precisely rather than adapting a standard box that may not suit the opening.
Can extra air outlets be added to an existing duct network?
Yes, within what the existing network capacity and main duct space allow. The technician checks the duct diameter at the proposed branch point and confirms that pressure is sufficient to feed the new outlet without weakening the existing ones. Competitive prices apply, with discounts by quantity and project size.
Does the flexible duct link affect the noise level inside the room?
Yes. A flexible duct link narrower than required speeds the air up and produces an audible whistle. One that is too long or bent at a sharp angle creates turbulent airflow. The technician decides the correct diameter and duct path at the site survey, based on the distance between the plenum box and the grille opening and the room size.
Mixed buildings here have different requirements for flats and shops, how do you choose air outlets?
We establish each room's size and usage level (residential or commercial), and select air diffusers accordingly in consultation with the engineer.
Shared corridors are tight, how do you fit flexible ducts and outlets?
We use diameters specified in the design and fit them so they do not obstruct corridor movement or cross other pipes or runs.
Does coastal humidity affect the glass-wool insulation in the plenum box over time?
Yes, high humidity can degrade insulation if it is not sealed, so we ensure firm insulation is fitted and all openings are sealed.
Does duct and flexible link work affect existing electrics and plumbing?
No, but we check electrical and pipe runs beforehand and avoid any cutting or rubbing against them during installation.


























































































