Copper piping works in Al Mahamid, Jeddah
In Al Mahamid, east Jeddah, a district blending residential, commercial and industrial projects, copper piping for central AC needs precise routing around existing storage and facilities. Alrabih lays the copper at the required diameters, applies specialized insulation, and pressure and vacuum tests it before operation.
4.9 on Google- Full insulation
- Dual test
- Secure supports
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When you need a professional copper run
- 1
A new project or system expansion
A new central or split system needs a copper run sized to match the unit's capacity and the distance between the two sides. A run that is laid wrong from the start weakens performance and strains the compressor over time.
- 2
A long distance between the units
In commercial and industrial buildings the run can cross ceilings, walls and service voids. We supply copper runs of up to 30 metres without welded joints, and the site survey determines the route and the number of joints needed.
- 3
An old line with a recurring leak
If inspection shows the existing pipe is corroded or its joints cannot hold pressure again, a full re-run is safer than repeated patching. Jeddah's salty, humid air accelerates corrosion in copper that is not properly insulated.
Who it's for
Installing a new split system in your villa
We lay the copper in the right diameter for each unit, insulate it immediately and run a pressure and vacuum test before charging.
Ask on WhatsAppRunning a commercial building on a central system
We run copper lines through ceilings and service voids, with control wiring, drain pipe and full pressure and vacuum tests.
Ask on WhatsApp
What the job covers
What the work covers
- Copper pipe in required diameter
- Armaflex or Kimmco insulation
- Supports, bends and sleeves
- Control and power wiring
- Pressure test and vacuum
How we work
How we work
- 1
Route survey
We visit the site, agree the route from the indoor to the outdoor unit with you, confirm the pipe diameter and mark every fixing point and obstacle along the way.
- 2
Lay, insulate and support
We lay the pipes along the agreed route, insulate them immediately to prevent moisture and condensation, and fix them to supports spaced to stop any sagging.
- 3
Wires and drain pipe
We run the control and power wires alongside the copper in a tidy arrangement that makes future servicing straightforward, and we fit the condensate drain pipe with a fall that carries water clear of the indoor unit.
- 4
Pressure test and vacuum
We pressurise the line to find any joint leak before charging, then vacuum it to remove air and moisture with a vacuum pump. Once the reading holds, the line is ready for refrigerant, with a one-year warranty.
Why Alrabih?
A thorough run or a quick one?
| Alrabih | The usual way | |
|---|---|---|
| Insulation | Full, fitted immediately | Partial or left for later |
| Supports | Evenly spaced | Too few or missing |
| Pressure test | Always before charging | Sometimes skipped |
| Vacuum | Pump with reading held | Neglected in many cases |
| Control wiring | Laid with the copper, tidy | Left to a later stage |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Mahamid is a mixed-use district containing residential, commercial and even storage facilities and small industrial units, meaning buildings of varied sizes with irregular spacing. This diversity calls for flexible routing of copper runs to navigate existing facilities and tight roofs. The coastal humidity and salt air make strong copper insulation and corrosion protection vital, especially when pipes are exposed in an industrial or commercial setting.
Al Mahamid is in east Jeddah, a mixed-use district combining residential, commercial and small industrial projects with irregular planning.
The small commercial and industrial projects here often need central AC with copper pipes routed around existing facilities and equipment.
The AC setup in Al Mahamid
- 1
Copper runs navigating equipment and facilities
In commercial and industrial projects, copper pipes are routed to avoid equipment, tanks and confined roof spaces.
- 2
Extra protection in exposed and elevated areas
Exposed and elevated areas need sturdy brackets and protection sleeves to keep the pipes stable and shield them from wind and corrosion.
- 3
Flexible routing around obstructions
Copper runs may need to wind around existing facilities, and we coordinate with the engineering team to preserve system integrity.
Before the visit
Before our visit in Al Mahamid
- 1
Map existing facilities and obstructions
Provide us with a sketch or description of equipment, tanks and other obstructions that may affect the copper route.
- 2
Specify the outdoor unit location and indoor areas
Specify where the outdoor unit will be placed and which indoor areas of the building or project need cooling.
- 3
Provide safe space for testing
Designate a safe area near the outdoor unit for the team to conduct pressure and vacuum testing before system startup.
More districts for Copper piping works
Other services in Al Mahamid
FAQ
Questions about Copper piping works
How does pipe diameter differ between a split and a central system?
The diameter depends on the system's capacity and the distance between the units, not on the system type alone. A central system serving a whole building needs larger diameters than a split for a single room. The survey and the unit datasheet set the right size; the wrong choice weakens performance or raises electricity consumption.
Why is the pipe insulated right after laying and not at the end of the job?
In Jeddah's humid air, condensation forms on the cold pipe surface as soon as the system runs. If the copper is left bare during installation, moisture gets between the pipe and the insulation and reduces its performance. Insulating immediately prevents this and protects the copper surface from early oxidation.
Can you run the copper inside finished walls or ceilings?
Yes, in suspended ceilings or service voids where access allows. Inside a finished concrete wall access is limited and may need extra building work. The survey identifies the practical route, and where concealment is not possible we use protective sleeves on the surface.
Why does the condensate drain matter in a copper piping job?
The indoor unit produces steady condensate, especially in Jeddah where humidity is high. Without enough fall in the drain pipe, or if it is routed in a way that blocks flow, water backs up in the tray and spills onto the ceiling or wall. We run it with a proper fall and separately from the other pipes.
How does Jeddah's humidity affect the insulation on copper pipe?
Jeddah's high humidity degrades pipe insulation quickly when the material is not vapour-resistant or when joints are left unsealed. We use Armaflex or Kimmco materials suited to a coastal climate and seal every joint carefully so that moisture cannot reach the cold copper surface and start early corrosion.
The area has mixed residential, commercial and industrial buildings, how do you plan the copper run?
We visit the site first to understand the building layout and existing facilities, then plan the copper route to avoid obstacles or cross them safely.
The spacing and gaps are irregular, does this affect the pipe length?
The copper length depends on the actual distance from the outdoor unit indoors, and we coordinate with you first to confirm the distance is practical and safe.
Commercial and industrial facilities are often exposed, how do you protect copper from salt and humidity?
We use heavy heat insulation like Armaflex or Kimmco to protect copper from coastal humidity and salt, and fix it with strong brackets.
Before the AC starts, how do you ensure the pipes are free of air and moisture?
We pressure and vacuum test the copper to remove any air or moisture, ensuring the refrigerant fills the pipes correctly and prevents leaks.


























































































