Copper piping works in Riyadh, Riyadh Region

Copper piping in Riyadh connects the indoor and outdoor units along planned routes before walls or ceilings close. We fabricate duct in our Jeddah workshop, supply it to your site in Riyadh, and install it with every detail including the first test before refrigerant goes in.

4.9 on Google
  • Full insulation
  • Dual test
  • Secure supports

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When you need a professional copper run

  1. 1

    A new project or system expansion

    A new central or split system needs a copper run sized to match the unit's capacity and the distance between the two sides. A run that is laid wrong from the start weakens performance and strains the compressor over time.

  2. 2

    A long distance between the units

    In commercial and industrial buildings the run can cross ceilings, walls and service voids. We supply copper runs of up to 30 metres without welded joints, and the site survey determines the route and the number of joints needed.

  3. 3

    An old line with a recurring leak

    If inspection shows the existing pipe is corroded or its joints cannot hold pressure again, a full re-run is safer than repeated patching. The building's conditions and its city's climate both affect how quickly uninsulated copper corrodes, and this is assessed during the site survey.

Who it's for

  • Installing a new split system in your villa

    We lay the copper in the right diameter for each unit, insulate it immediately and run a pressure and vacuum test before charging.

    Ask on WhatsApp
  • Running a commercial building on a central system

    We run copper lines through ceilings and service voids, with control wiring, drain pipe and full pressure and vacuum tests.

    Ask on WhatsApp

What the job covers

What the work covers

  • Copper pipe in required diameter
  • Armaflex or Kimmco insulation
  • Supports, bends and sleeves
  • Control and power wiring
  • Pressure test and vacuum
Request a quote

How we work

How we work

  1. 1

    Route survey

    We visit the site, agree the route from the indoor to the outdoor unit with you, confirm the pipe diameter and mark every fixing point and obstacle along the way.

  2. 2

    Lay, insulate and support

    We lay the pipes along the agreed route, insulate them immediately to prevent condensation, and fix them to supports spaced to stop any sagging.

  3. 3

    Wires and drain pipe

    We run the control and power wires alongside the copper in a tidy arrangement that makes future servicing straightforward, and we fit the condensate drain pipe with a fall that carries water clear of the indoor unit.

  4. 4

    Pressure test and vacuum

    We pressurise the line to find any joint leak before charging, then vacuum it to remove air and moisture with a vacuum pump. Once the reading holds, the line is ready for refrigerant.

Start with step one

Why Alrabih?

A thorough run or a quick one?

AlrabihThe usual way
InsulationFull, fitted immediatelyPartial or left for later
SupportsEvenly spacedToo few or missing
Pressure testAlways before chargingSometimes skipped
VacuumPump with reading heldNeglected in many cases
Control wiringLaid with the copper, tidyLeft to a later stage
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

Copper piping works in cities near Riyadh

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Riyadh

What sets this city apart

In Riyadh's spacious villas and residential compounds, copper runs from a concealed unit above the ceiling to an outdoor unit on the roof, and needs tight insulation because the severe summer heat affects cooling efficiency. In commercial and office buildings the copper route may be longer and more complex, with condensate drain pipes crossing unconditioned areas that gather dust.

Riyadh is the capital on the Najd plateau, with a hot dry desert climate: very hot summers and notable dust.

Riyadh villas commonly use short copper runs from the concealed unit to the roof, with full insulation and condensate drained outside.

All our services in Riyadh

The AC setup in Riyadh

  1. 1

    Copper hidden in walls

    In Riyadh villas, copper usually runs inside walls from the indoor to the outdoor unit, protecting it from heat and dust and improving appearance.

  2. 2

    Insulated copper on the roof

    Where copper crosses the roof to the outdoor unit, it is fully insulated and covered with protective sleeves against sun and dust.

  3. 3

    Strong supports and fixing

    In tall office buildings, copper is fixed with strong metal supports on roofs and exterior walls to withstand vibration and seasonal winds.

Before the visit

Before our visit in Riyadh

  1. 1

    Prepare the proposed route plan

    Send a plan or photo showing the indoor and outdoor units and exposed areas, so we can calculate the copper length and insulation needed.

  2. 2

    Confirm the final drainage point

    Agree with the site engineer where the condensate pipe will drain away from the villa or building, as it affects the drain route.

  3. 3

    Coordinate the installation date with the contractor

    Ensure the walls and ceilings are ready for copper runs and that the indoor and outdoor units have arrived on site, so we can install and pressure-test without delay.

FAQ

Questions about Copper piping works

How does pipe diameter differ between a split and a central system?

The diameter depends on the system's capacity and the distance between the units, not on the system type alone. A central system serving a whole building needs larger diameters than a split for a single room. The survey and the unit datasheet set the right size; the wrong choice weakens performance or raises electricity consumption.

Why is the pipe insulated right after laying and not at the end of the job?

Condensation forms on the cold pipe surface as soon as the system runs. If the copper is left bare during installation, moisture gets between the pipe and the insulation and reduces its performance. Insulating immediately prevents this and protects the copper surface from early oxidation.

Can you run the copper inside finished walls or ceilings?

Yes, in suspended ceilings or service voids where access allows. Inside a finished concrete wall access is limited and may need extra building work. The survey identifies the practical route, and where concealment is not possible we use protective sleeves on the surface.

Why does the condensate drain matter in a copper piping job?

The indoor unit produces steady condensate. Without enough fall in the drain pipe, or if it is routed in a way that blocks flow, water backs up in the tray and spills onto the ceiling or wall. We run it with a proper fall and separately from the other pipes.

How does a city's climate affect the insulation on copper pipe?

The building's conditions and its city's climate can degrade pipe insulation when the material is not vapour-resistant or when joints are left unsealed. We use Armaflex or Kimmco materials and seal every joint carefully so that moisture cannot reach the cold copper surface and start early corrosion.

Why is copper insulation different in Riyadh than in cooler cities?

In Riyadh the extreme external heat causes major cooling loss from uninsulated copper, especially if it crosses an exposed roof. We choose the insulation thickness based on the copper length and how much of it is exposed.

Do you supply the copper from Jeddah to Riyadh sites?

We supply copper runs of up to 30 metres without welded joints, install it at your Riyadh site with insulation, supports, sleeves and wires, test the line before refrigerant goes in, and agree the timing in the quote.

How do we protect copper from dust and heat on the roof?

We use protective sleeves and covers for exposed copper on the roof, choose sun-protected routes where possible, and hide pipes in walls before they close.

How do we drain condensate if the indoor unit is above the false ceiling?

We run the drain pipe alongside the copper to a safe drainage point outside the villa or building, and ensure the pipe has a proper slope to prevent water or debris from pooling in it.

Start with a route survey

WhatsApp us a photo of the site and the system type, or call us, and we will arrange the survey in your district, Saturday to Thursday.

CallWhatsApp