Duct insulation in Riyadh, Riyadh Region
Duct insulation in Riyadh stops condensation on cold pipes and water dripping through false ceilings, especially in summer when the heat is fierce and the temperature gap between the cold air in the duct and the hot air outside is extreme. We fit glass-wool insulation to galvanized duct in our Jeddah workshop, supply it to your site and install it with sealed joints and corners.
4.9 on Google- Glass-wool wrap
- Vapour seal
- No condensation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When duct insulation becomes urgent
- 1
Condensation patches on the false ceiling
Patches of condensation or drips under the false ceiling usually mean cold duct with no proper insulation. Water vapour in the air touches the cold metal, condenses, falls onto the ceiling boards and ruins the plaster and paint.
- 2
Old, cracked or loose insulation
Insulation that has cracked, pulled away from the metal or been soaked by a past leak no longer stops water vapour. Even a small gap between two sections is enough for vapour to condense on the metal and restart the dripping problem.
- 3
New duct you want fully insulated
When new air ducts are installed in a home or commercial building, insulation is part of the work, not an afterthought. We wrap the duct and seal the joints before the ceiling is closed so it never needs to be opened again for this reason.
Who it's for
Noticing condensation patches on your room ceiling
We survey the duct, wrap it in glass-wool and seal every joint so condensation stops completely.
Ask on WhatsAppInstalling new duct in a commercial building
We wrap the duct in glass-wool and seal all joints before the ceiling closes, with a one-year warranty.
Ask on WhatsApp
What the job covers
What the insulation work covers
- Duct route and insulation survey
- Glass-wool wrap over duct
- Vapour-sealed joints and corners
- Plenum box and connections insulated
- Fixed with correct fasteners
How we work
How we work
- 1
Ceiling and duct survey
The technician inspects the duct route and any existing insulation, then marks the sections that need new wrapping or re-insulation before work begins.
- 2
Surface prep and strip-out
Damaged or wet insulation is stripped off and the metal surface cleaned so the new material bonds properly with no air pockets trapped beneath.
- 3
Wrap and seal
We wrap the duct in glass-wool and cover every joint, corner and connection with the correct vapour barrier, using Foster, Armaflex or Kimmco sealing materials as the site requires.
- 4
Check and handover
The technician checks the insulation along the full route, confirms the wrap is secure and joints are gap-free, then hands over the completed work with a one-year warranty and competitive prices.
Why Alrabih?
Sealed insulation or a surface cover?
| Alrabih | The usual way | |
|---|---|---|
| Vapour barrier | Sealed at every joint and corner | Left open or incomplete |
| Joins between sections | Closed with correct sealant | Tape that peels off |
| Plenum box and connections | Insulated with the rest | Sometimes left bare |
| Drips after fitting | Stops when sealing is correct | Returns within weeks |
| Sheet material | G90 galvanized sheet from SABIC | Sheet of unspecified grade |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
Duct insulation in cities near Riyadh
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Riyadh
What sets this city apart
In Riyadh villas and residential buildings the duct runs above false ceilings in unconditioned spaces, exposed to intense heat outside and cold inside, causing strong condensation on the pipe surface. Insulated duct with bonded glass-wool keeps the air temperature steady and stops moisture condensing, so no water drops and no damp ceilings.
Riyadh is the Kingdom's capital on the Najd plateau, marked by harsh summer heat and dust, with many villas and tall office and commercial buildings.
In most Riyadh villas, insulated duct stays cool for hours even in an unconditioned ceiling under direct sun.
The AC setup in Riyadh
- 1
Insulated duct in unconditioned ceilings
Duct crossing an unconditioned upper-storey ceiling or attic needs thick insulation because it faces prolonged direct heat every day.
- 2
Tight sealing at corners and branches
Every corner and branch needs tight vapour tape sealing, because humid air finds any small opening to reach the cold duct inside.
- 3
Re-insulating bare old duct
If old villa duct has no insulation or damaged insulation, we add new insulation during maintenance and seal all weak joints.
Before the visit
Before our visit in Riyadh
- 1
Photograph any uninsulated existing duct
If there is old bare or damaged duct, photograph it and note where it runs, in a ceiling, attic or roof, because the insulation thickness depends on location and heat exposure.
- 2
Specify the new insulated duct route
Send a plan or sketch showing the new duct route, especially the sections running through unconditioned spaces or exposed to sun.
- 3
Agree on appropriate insulation thickness
We set the insulation thickness based on the duct location and expected heat, and confirm the materials and standard with you before workshop production.
Other services in Riyadh
FAQ
Questions about Duct insulation
Why does water vapour condense on duct?
When cold air runs through the duct it chills the metal, and water vapour in the surrounding air condenses on it immediately if no insulation keeps vapour away from the metal surface. The effect varies between buildings, and a site survey assesses the building's conditions and its city's climate to determine the right insulation.
Can duct be insulated after the false ceiling is closed?
It depends on the size of existing access hatches and the duct route. In some areas the work can be done through the hatches already there; in others a section of ceiling needs to be opened. The survey decides the right approach before any work starts.
What is the difference between Armaflex, Kimmco and Foster for duct insulation?
Armaflex and Kimmco are flexible insulation materials used for wrapping duct and reducing condensation. Foster is a sealant applied to joints and connections to block vapour from passing through. We choose the right material for each part of the duct after the site survey, and may use more than one on a single project.
Do you insulate duct in commercial and industrial projects too?
Yes, we work in residential, commercial, industrial and government buildings. Project size affects quantities and coordination with other trades, which the survey maps out.
Does the plenum box need different insulation from the rest of the duct?
The plenum box has a larger surface area and cools quickly, making it especially prone to condensation. The technician wraps it in glass-wool and seals its corners and openings with the correct vapour barrier. The sealant chosen may differ from the one used on the rest of the duct route, depending on what the survey finds.
Why does water drip from the duct in a villa ceiling in Riyadh?
Cold air inside the duct and intense heat outside cause condensation on the pipe's outer surface. Insulating the duct raises the surface temperature so water vapour does not condense on it.
Is the insulation made in the workshop or on site?
We bond the glass-wool insulation to the duct in our Jeddah workshop before supply, so it reaches your site insulated and ready to install. We seal the joints and corners on site to ensure a tight fit.
Is duct insulation necessary in Riyadh?
Yes, essential. The gap between summer heat and the cold air in the duct creates heavy condensation, and insulation protects ceilings and floors from dampness and mould.
How do you seal the insulation joints?
We seal the duct joints and corners with a tight vapour tape that stops humid air entering the insulation layer and reaching the cold metal beneath.


























































































