AC duct manufacturing in Makkah, Makkah Region

AC duct manufacturing in Makkah serves the dense hotels, residential towers in the valley and government buildings. We fabricate the duct to precise sizes and tight insulation against heat, and deliver it ready to install in your projects.

4.9 on Google
  • Sealed seams
  • Full insulation
  • Delivered ready

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When duct quality makes the difference

  1. 1

    Duct losing cold air

    An open seam or an unsealed joint loses cold air before it reaches the room. We close every seam with Foster sealant in the workshop before shipping, so the seal does not depend on site work alone.

  2. 2

    Condensation wetting the ceiling

    Any bare metal surface can sweat and drip onto the ceiling or damage the unit insulation, depending on the building's conditions and its city's climate. We wrap with Kimmco or Armaflex at the thickness the site calls for.

  3. 3

    A project with many duct runs

    A villa or commercial building needs main trunks, branches and plenums in several sizes. We make sections in the workshop numbered to the site plan, so the hanging crew assembles without cutting or adjusting.

Who it's for

  • Replacing your villa's AC and need new ductwork

    We make supply and return trunks and plenums to your villa's dimensions, insulated and numbered, ready for the hanging crew without any on-site cutting.

    Ask on WhatsApp
  • Running a commercial fit-out that needs duct runs

    We take your project drawings and produce numbered sections in batches matched to your site schedule, so the hanging crew is never waiting on supply.

    Ask on WhatsApp

What the job covers

What the manufacturing covers

  • Supply and return trunks
  • Unit plenums to opening size
  • Seams sealed with Foster
  • Kimmco or Armaflex outer wrap
  • Numbered sections ready to hang
Request a quote

How we work

How we work

  1. 1

    Send sizes or drawings

    Send us the duct drawing or a list of section sizes. If sizes are not fixed yet, we agree a site survey before production starts.

  2. 2

    Review sizes and sheet gauge

    We check each section's dimensions and pick the right sheet thickness for the duct size, then confirm quantities with you before cutting begins.

  3. 3

    Fabricate, seal and insulate

    We cut and fold the G90 galvanised sheet, lock the seams with Foster sealant, and wrap each section with Kimmco or Armaflex insulation in the workshop before shipment.

  4. 4

    Number and deliver

    We mark each section with its position and dimension from the site plan, so the hanging team identifies every piece without confusion and starts work on arrival.

Start with step one

Why Alrabih?

Workshop-made or site-cut duct?

AlrabihThe usual way
SealingFoster on every seam in workshopUneven site sealing
InsulationKimmco or Armaflex fully wrappedPartial or delayed wrap
Sheet gaugeChosen for each duct sizeOne gauge for everything
Assembly timeNumbered, assembled straight awayCut and adjust on site
Joint fitWorkshop dimensions close every jointHand trimming breaks the seal
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

AC duct manufacturing in cities near Makkah

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Makkah

What sets this city apart

Hotels and residential towers in Makkah are high-density buildings needing complex multi-storey duct systems. The intense year-round heat and narrow valley constrain duct routes and demand strong insulation on every run. Precise fabrication and sealed joints in the workshop speed installation in towers and keep airflow efficient across large systems.

Makkah is a holy city in a valley among rugged granite mountains, with hot dry climate most of the year and dense hotel and residential towers.

Hotel and residential towers in Makkah need duct with graduated sections and strong insulation because heat affects every floor.

All our services in Makkah

The AC setup in Makkah

  1. 1

    Main duct with graduated sections

    The main duct in towers is fabricated with graduated sections, starting with large cross-sections at the tower base and reducing toward the top.

  2. 2

    Tight insulation on every branch

    Every branch duct is insulated to a thickness matching its length and route, to keep the air cool across floors in intense heat.

  3. 3

    Sealed sections ready for assembly

    The duct is delivered in sealed sections with every joint tight, so assembly and testing in the tower proceed without delay.

Before the visit

Before our visit in Makkah

  1. 1

    Prepare complete system drawings

    Send the piping and duct drawings for every floor before the visit, so we fabricate sections to precise sizes matching the tower routes.

  2. 2

    Confirm branch and outlet points

    Agree duct branch and air outlet locations on every floor with the project engineer before fabrication.

  3. 3

    Arrange unloading and installation coordination

    Tell us the tower entrance and unloading location for the duct delivery, and confirm installation timing with us and the site crew.

FAQ

Questions about AC duct manufacturing

How do you make sure the duct does not leak air at the seams?

We close the long seams with a tight mechanical lock as the sheet is formed, then seal every seam and every joint between sections with Foster sealant before insulating. Sections leave the workshop with matching flanges that tighten evenly when hung, because any small gap in cold duct means lost air and a point where condensation forms.

Does the duct arrive ready to hang, or is it assembled on site?

Sections arrive fabricated, insulated, sealed and numbered to the route drawing, so the fitters know where each piece goes without cutting or altering on site. What is left on site is joining the sections, fixing them to the hangers and connecting the unit and outlets, which shortens the work above the ceiling.

Do you make plenums for cassette and cabinet units?

Yes, we fabricate plenums for both types. A cassette unit plenum is measured to match the unit's outlet frame exactly so air reaches the branch runs without leaking at the connection. A cabinet unit plenum is made to carry both the supply and return paths if the design calls for it. Both types are insulated with Kimmco or Armaflex and sealed with Foster sealant before they leave the workshop.

Can you manufacture duct for a large commercial project?

Yes. The workshop is equipped to fabricate large supply and return trunk runs suited to commercial, government and industrial buildings. Each section is made to the project drawings, numbered and delivered ready to hang after insulation and sealing. When engineering drawings are available, the technical team reviews them before fabrication starts to confirm that the duct dimensions fit the ceiling voids on site.

Why are the duct sections insulated in the workshop before delivery?

The duct carries cold air through a ceiling void that may be hot. Without external insulation, water vapour condenses on the cold sheet and drips onto the false ceiling or the goods below, according to the building's conditions and its city's climate. So each section is wrapped in Kimmco or Armaflex in our workshop and every edge and joint is sealed with Foster sealant before delivery.

Do you fabricate duct for hotel and residential towers in Makkah?

Yes, we fabricate complex duct for hotel and residential towers and government buildings in Makkah, with sizes and branch points set by the system design.

How does duct made in Jeddah reach a project in Makkah?

We fabricate the duct in our workshop to approved sizes and specs, supply it to your Makkah site, and agree delivery and installation dates in the quote.

Does Makkah's intense heat damage fabricated duct quality?

Fabricating duct with strong Kimmco or Armaflex insulation protects the cool air, and tight Foster sealing prevents air leaks even in intense heat.

How is metal thickness chosen for duct in tall towers in Makkah?

We set metal thickness based on pressure difference on each floor and duct size, following SMACNA standards, so the main duct lower down is thicker than branches higher up.

Order your duct ready to hang

WhatsApp your drawings or size list, or call us, and we will arrange manufacturing and delivery details with you, Saturday to Thursday.

CallWhatsApp