Duct fabrication in Riyadh, Riyadh Region

Duct fabrication in Riyadh begins with precise measurement of routes and sections from the site or drawings, then every piece is made in our workshop instead of being cut haphazardly on site. We are based in Jeddah and fabricate duct from galvanized or aluminium sheet to SMACNA, then supply it to Riyadh.

4.9 on Google
  • G90 sheet
  • Site dimensions
  • Complex fittings

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

Who needs workshop-fabricated duct?

  1. 1

    A contractor with project-specific sizes

    Your project has non-standard sizes or volumes too large for site cutting. We fabricate rectangular and round sections from your drawings at exact dimensions, labelled and ready to hang when they reach the site.

  2. 2

    Fittings too awkward to cut on site

    Elbows, transitions, offsets and takeoffs come out distorted when cut by hand on site, leaking air and creating noise in the line. We make them in the workshop at the right dimensions with tight seams.

  3. 3

    Extending or renovating an existing duct network

    You need new branches, a damaged section replaced or a fitting that matches an old duct size. We measure the existing network on site and fabricate the pieces to match what is already there.

Who it's for

  • Building a facility that needs non-standard duct sizes

    We read your project drawings and fabricate all sections and fittings at exact dimensions from G90 or aluminium sheet, labelled and ready to hang the moment they reach your site.

    Ask on WhatsApp
  • Renovating home AC and need fittings to match old duct

    We measure the existing ductwork in your home and fabricate the branches, transitions and elbows needed to match the original duct without replacing the whole network.

    Ask on WhatsApp

What the job covers

What the fabrication covers

  • Site measure or drawings
  • G90 or aluminium duct
  • Elbows transitions and takeoffs
  • Tight seams to SMACNA
  • Labelled sections ready to hang
Request a quote

How we work

How we work

  1. 1

    Take measurements

    A technician visits the site or you send us the drawings; we list every duct section needed, its size and the correct sheet thickness for that section.

  2. 2

    Fabricate sections and fittings

    We cut, form and lock the sheet in the workshop, including all elbows, transitions, offsets and takeoffs, and each section comes out at its exact dimension.

  3. 3

    Label and prepare for delivery

    We number every section and fitting against the assembly plan so the installation crew knows exactly where each piece goes, with no guessing on site.

  4. 4

    Deliver to site

    We deliver the duct to your site protected and ready to hang. If you need an installation crew, we can arrange that as a separate step.

Start with step one

Why Alrabih?

Workshop fabrication or site cutting?

AlrabihThe usual way
Dimensional accuracyWorkshop machines, tight dimsHand variation on site
Complex fittingsCorrect elbows and transitionsDistorted, leaking air
Seam qualityTight lock, low leakageGaps weaken pressure
Site scheduleArrives ready to hangExtra time and site noise
Site and climate conditionsAluminium where site demandsOne sheet regardless
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

Duct fabrication in cities near Riyadh

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Riyadh

What sets this city apart

Villas and commercial buildings in Riyadh need complex duct cuts, precise fittings, elbows and transitions that cannot be made well on site. We make these parts in our workshop to the approved design sizes, so they arrive ready to install without re-measuring or cutting. Contractors and projects in Riyadh order duct fabricated to their exact sizes.

Riyadh is the capital on the Najd plateau, with urban development mixing large villas, office and commercial towers, and warehouses.

Duct fabricated in the workshop arrives at the project site in Riyadh on a truck, saving installation time and ensuring precise connections between sections.

All our services in Riyadh

The AC setup in Riyadh

  1. 1

    Standard-gauge galvanized sheet

    We use G90 galvanized sheet in appropriate gauges for AC and ventilation duct in Riyadh, balancing strength and weight.

  2. 2

    Complex fittings and precise elbows

    We make elbows, transitions and takeoffs with precise angles and correct openings, instead of random cuts that weaken sections.

  3. 3

    Round and rectangular duct

    We make duct in round and rectangular sections to match the design requirements and available spaces in villas and buildings in Riyadh.

Before the visit

Before our visit in Riyadh

  1. 1

    Send the mechanical and architectural drawings

    Send the complete drawings via WhatsApp before the visit, so we can calculate duct sizes and quantities accurately.

  2. 2

    Confirm the main duct routes

    Settle with the engineer the routes for the main duct, branches and outlets, whether above false ceilings or in walls.

  3. 3

    Prepare photos of site spaces

    Send photos of the spaces and passages where the duct will run, so we can confirm safe transport and efficient installation.

FAQ

Questions about Duct fabrication

Can you fabricate from drawings without visiting the site?

Yes, when the drawings are clear and carry the actual as-built dimensions. If a dimension is uncertain or a field change has been made, we prefer a site visit to avoid a fabricated piece that does not fit. We discuss the better approach with you before starting work.

What is the difference between galvanized and aluminium sheet for duct?

G90 galvanized sheet is the standard choice for interior duct: strong and suited to a range of pressures. Aluminium is lighter and handles exposed conditions better, making it right for some outdoor applications or where structural load is a limiting factor. The building's conditions and its city's climate determine the correct choice.

Can you make elbows and transitions to match an existing duct network?

Yes. We measure the existing network on site to match sizes precisely, whether you need a new branch added, a damaged fitting replaced or an extension tied into the original ductwork. The right approach is confirmed after the site visit.

How do you choose sheet thickness for each section?

Thickness follows section size: a large duct needs heavier sheet to hold its shape under pressure, a small one can use lighter material. We apply the SMACNA requirements to each section in the project individually, not a single thickness across the whole job.

Does climate affect which sheet material to use?

Yes, particularly for sections exposed to outdoor air or installed near fresh-air intakes. G90 galvanized sheet performs well inside the building, but aluminium is the better choice where duct faces continuously harsh air conditions. The site survey accounts for the building's conditions and its city's climate to determine the right material for each section.

What is the difference between workshop-made duct and site-cut duct?

Duct from our workshop arrives with precise dimensions and complex fittings (elbows, transitions, takeoffs) already made, so installation is faster and more airtight. Site-cut duct causes leaks, energy loss and work delays.

How do you decide the duct sizes you fabricate for a Riyadh project?

We take the architectural and mechanical drawings from the engineer or contractor, measure the routes on site if needed, then calculate the main duct and branch sizes according to the design and standards.

Can fabricated duct withstand Riyadh's extreme heat and dust?

We select the material (galvanized or aluminium sheet) and gauge to suit the site conditions and design, and ensure tight joints so air does not escape in the dusty, dry environment.

Do you supply duct to contractors and consultancies on projects in Riyadh?

Yes. We fabricate duct to the needs of contractors and projects in Riyadh, and send quotes, drawings and details via WhatsApp once sizes and quantities are agreed.

Send your drawings or measure the site with us

WhatsApp us your duct drawings or site photos and we will arrange measurement and fabrication, Saturday to Thursday.

CallWhatsApp