AC duct installation in Al Khobar, Eastern Province
AC duct installation in Al Khobar connects the indoor unit to every room with insulated and balanced branches, but the Gulf coast and intense humidity add challenges. Al Khobar is a city of towers, hotels and close-packed residential compounds, and each building needs precisely designed duct that resists moisture and salt.
4.9 on Google- Sized branches
- Sealed insulation
- Clean return path
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Is it for you?
When you need a properly designed duct fit
- 1
One room cold, another warm
The unit runs but one room is too warm while the next is too cold. The cause is usually unbalanced branches or a diffuser that was never adjusted, not a fault in the unit itself.
- 2
Duct sweating and water on the ceiling
Uninsulated cold duct sweats on the outside and water collects on the plasterwork above. Proper insulation with Armaflex or Kimmco stops the problem before it damages the ceiling finish.
- 3
Installing a concealed unit in a new build
The right time to fit duct properly is during the fit-out, before the false ceiling closes. We agree plenum dimensions, branch sizes and the return-air route at the survey before any work starts.
Who it's for
Fitting a concealed unit in your new villa
Before the false ceilings close, we design the plenums, branches and return-air route to suit the unit and each room in the villa.
Ask on WhatsAppSweating ceiling and uneven airflow in your building
We inspect the existing branches and return-air path, re-insulate the cold duct, and set the dampers so temperature evens out across every section of the building.
Ask on WhatsApp
What the job covers
What the duct installation covers
- Supply and return plenums
- Sized branch to each room
- Armaflex or Kimmco insulation
- Diffuser balancing with dampers
- Airflow check before ceiling closes
How we work
How we work
- 1
Site and unit survey
We measure the rooms and study the unit's data and plenum spec, and we settle the return-air route before deciding on branch sizes.
- 2
Design branches and plenum
We size each branch so it takes the right share of air without starving rooms farther from the unit, and we plan a return path with a correctly sized intake opening.
- 3
Fit and insulate
We fix the plenums and branches using SMACNA-standard duct, then insulate every cold surface with a sealed layer suited to the building's conditions and its city's climate.
- 4
Balance and hand over
We set each diffuser damper and check airflow in every room with you before the false ceiling is closed, then leave the site clean.
Why Alrabih?
Designed duct or just connected duct?
| Alrabih | The usual way | |
|---|---|---|
| Branch sizing | Calculated per room | Connected without sizing |
| Return air | Routed with a sized intake | Left to chance |
| Duct insulation | Sealed against sweating | Thin or absent |
| Diffuser balance | Damper set per room | All diffusers fully open |
| Pre-closure airflow check | Done with you before closing | Faults found after ceiling closes |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
Copper piping works
Request this service
Air outlets and grilles installation
Request this service
Ventilation and exhaust systems
Request this service
HVAC controls and automation
Request this service
Duct insulation
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Testing and commissioning
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Government building HVAC
Request this service
Sports club HVAC
Request this service
Tower and office building HVAC
Request this service
University HVAC
Request this service
G90 galvanized steel and aluminium sheets
Request this service
Mueller and Lawton copper pipes
Request this service
Air grilles and diffusers (Saudi-made)
Request this service
Central AC accessories and materials
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we have completed.
Customer reviews
What our customers say
- Waleed Daadouch
“The nicest treatment from the showroom team, and their prices are very competitive.”
Translated from Arabic
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- RHAM rhamLocal Guide
“May God grant them success. Refined and respectful treatment.”
Translated from Arabic
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Shakeel Ahmed
“Nice experience very cooperative. Nice conducting with all customers”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewWhere we work
AC duct installation in cities near Al Khobar
We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Al Khobar
What sets this city apart
Al Khobar has tall office and residential towers, warehouses and malls, hotels and resorts and villa compounds in residential districts. Gulf salt and humidity affect every building, and the duct needs tight insulation and reliable drainage. Multi-storey towers need a main duct with complex branches and very precise balance, because long branches and distant copper drop pressure and throw off balance. Hotels and resorts need room-by-room temperature and humidity control.
Al Khobar is a Gulf coastal city in the Eastern Province, marked by high heat, intense humidity and dense salty air for most of the year.
A common setup in Al Khobar towers is a central indoor unit in a plant room with duct branches extending to multiple floors and outdoor units on the roof.
The AC setup in Al Khobar
- 1
Central indoor unit with vertical branch ducts
The indoor unit is mounted in a central plant room in the tower, and the main duct rises vertically with branches serving each floor.
- 2
Tight insulation against daily condensation
The duct and drainage are heavily insulated against persistent Gulf humidity, especially where exposed to outside air or temperature swings.
- 3
Rooftop outdoor units with salt-spray protection
Outdoor units are mounted on the roof away from direct spray and surrounded by barriers or protective covers from airborne salt.
Before the visit
Before our visit in Al Khobar
- 1
Send the tower plan for all floors and uses
Send the complete plan with room names and uses (residential, offices, hotel) per floor, so we can calculate loads accurately and design correct branches.
- 2
Confirm indoor, outdoor and drainage locations
Agree with the engineer where the indoor unit goes in the plant room, outdoor units on the roof, and how drainage and copper pipes rise through shafts.
- 3
Arrange duct access and mounting on multiple floors
Tell us about available lifts, corridors and shafts for moving duct from below and how fixing will work on each floor without disrupting other trades.
Other services in Al Khobar
FAQ
Questions about AC duct installation
Why does duct sweat and cause dampness on the ceiling?
Warm air condenses the moment it meets a cold duct surface. A site survey establishes the precise requirements based on the building's conditions and its city's climate, then we insulate with a sufficient layer of Armaflex or Kimmco with all joints sealed, raising the outer surface temperature above the dew point and stopping the sweating.
Does a longer branch deliver less air to the room?
Yes, a longer branch resists airflow more than a short one. This is why we size each branch individually, so near and far rooms receive balanced quantities of air, and we complete the adjustment with dampers during start-up.
How do you size the return-air opening?
The intake opening must be large enough so the unit does not work against negative pressure that strains it. We check the unit data and plenum requirements and decide size and position at the survey, because placing it behind a closed door or away from occupied areas changes the calculation.
Does a large room need more than one air outlet?
Usually, yes. A long majlis or a wide living room cannot be served by one outlet, because the air cools one end and leaves the other. We spread the outlets along the room, split the branch between them, and keep them away from the return grille so cool air does not go straight back to the unit.
Does the duct material affect sweating and airflow balance?
Yes. Sheet metal duct holds its shape under air pressure, so flow quantities stay as designed. Flexible duct can compress or sag, changing its cross-section and upsetting the balance. We therefore fabricate the main branches from galvanised sheet in our workshop and use flexible duct only for the shortest possible connection at each diffuser.
How do we balance airflow in a multi-storey Gulf tower in Al Khobar?
We calculate the load on each floor and room, design a main duct with graduated branch sizes, then test balance after installation and adjust dampers at each branch and outlet, accounting for pressure drop across floors.
How do you deliver complex duct to a tower in Al Khobar from your Jeddah workshop?
We fabricate the duct in sections to the approved plan and dimensions, transport it to your Al Khobar site, install it and connect the pieces, then test it as one system. We agree the delivery and installation schedule with you and the site.
Does Al Khobar's intense humidity require special duct and drainage design?
Yes. Near-constant humidity means the duct must be tightly insulated and drainage must be large enough and pitched correctly so water and salt do not pool. We set insulation thickness and drainage size after survey and design.
Do Al Khobar hotels and resorts need different balance than residential towers?
Yes. Hotels need precise control over each guest room separately, as each guest may request different temperature. We design duct with adjustable balance valves on each room branch and test performance room by room.


























































































