AC duct installation in Riyadh, Riyadh Region

AC duct installation in Riyadh requires design that balances the needs of spacious villas and multi-storey offices. We are based in Jeddah: we fabricate the duct in our workshop, supply it to your Riyadh site, install it and balance the airflow in every room before handover.

4.9 on Google
  • Sized branches
  • Sealed insulation
  • Clean return path

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When you need a properly designed duct fit

  1. 1

    One room cold, another warm

    The unit runs but one room is too warm while the next is too cold. The cause is usually unbalanced branches or a diffuser that was never adjusted, not a fault in the unit itself.

  2. 2

    Duct sweating and water on the ceiling

    Uninsulated cold duct sweats on the outside and water collects on the plasterwork above. Proper insulation with Armaflex or Kimmco stops the problem before it damages the ceiling finish.

  3. 3

    Installing a concealed unit in a new build

    The right time to fit duct properly is during the fit-out, before the false ceiling closes. We agree plenum dimensions, branch sizes and the return-air route at the survey before any work starts.

Who it's for

  • Fitting a concealed unit in your new villa

    Before the false ceilings close, we design the plenums, branches and return-air route to suit the unit and each room in the villa.

    Ask on WhatsApp
  • Sweating ceiling and uneven airflow in your building

    We inspect the existing branches and return-air path, re-insulate the cold duct, and set the dampers so temperature evens out across every section of the building.

    Ask on WhatsApp

What the job covers

What the duct installation covers

  • Supply and return plenums
  • Sized branch to each room
  • Armaflex or Kimmco insulation
  • Diffuser balancing with dampers
  • Airflow check before ceiling closes
Request a quote

How we work

How we work

  1. 1

    Site and unit survey

    We measure the rooms and study the unit's data and plenum spec, and we settle the return-air route before deciding on branch sizes.

  2. 2

    Design branches and plenum

    We size each branch so it takes the right share of air without starving rooms farther from the unit, and we plan a return path with a correctly sized intake opening.

  3. 3

    Fit and insulate

    We fix the plenums and branches using SMACNA-standard duct, then insulate every cold surface with a sealed layer suited to the building's conditions and its city's climate.

  4. 4

    Balance and hand over

    We set each diffuser damper and check airflow in every room with you before the false ceiling is closed, then leave the site clean.

Start with step one

Why Alrabih?

Designed duct or just connected duct?

AlrabihThe usual way
Branch sizingCalculated per roomConnected without sizing
Return airRouted with a sized intakeLeft to chance
Duct insulationSealed against sweatingThin or absent
Diffuser balanceDamper set per roomAll diffusers fully open
Pre-closure airflow checkDone with you before closingFaults found after ceiling closes
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

AC duct installation in cities near Riyadh

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Riyadh

What sets this city apart

Duct in Riyadh villas runs between distant rooms and high false ceilings, so branches must be evenly sized to prevent one room dominating the airflow. Office buildings need branches on every floor routed through walls and soffits, with a clear return-air path. Dust and heat make insulation and sealed joints essential to keep air cold over distance.

Riyadh is the Kingdom's capital on the Najd plateau, built with spacious villas, office and commercial towers, and industrial warehouses.

A common setup in Riyadh villas is a concealed ducted unit above the false ceiling with its outdoor unit on the roof.

All our services in Riyadh

The AC setup in Riyadh

  1. 1

    Equal-sized branches for distant rooms

    In spacious Riyadh villas we size branches evenly so no single room takes a disproportionate share of the airflow.

  2. 2

    Insulation on roofs and exposed routes

    Duct routed across villa or building roofs needs tight insulation against the intense heat and dust.

  3. 3

    Sealed return-air paths

    Sealed return-air grilles keep dust out and the system clean in Riyadh's dusty climate.

Before the visit

Before our visit in Riyadh

  1. 1

    Send drawings and room dimensions

    Provide architectural drawings and room sizes and distances, so we can calculate branch sizes and outlet positions accurately.

  2. 2

    Confirm positions of outdoor and indoor units

    Agree with the site engineer where the outdoor unit and the indoor unit (hidden or exposed) will sit, because this decides the duct and copper routes.

  3. 3

    Arrange delivery and unloading at site

    Tell us the site entrance and storage location for delivered duct, so it arrives on schedule without interrupting construction.

FAQ

Questions about AC duct installation

Why does duct sweat and cause dampness on the ceiling?

Warm air condenses the moment it meets a cold duct surface. A site survey establishes the precise requirements based on the building's conditions and its city's climate, then we insulate with a sufficient layer of Armaflex or Kimmco with all joints sealed, raising the outer surface temperature above the dew point and stopping the sweating.

Does a longer branch deliver less air to the room?

Yes, a longer branch resists airflow more than a short one. This is why we size each branch individually, so near and far rooms receive balanced quantities of air, and we complete the adjustment with dampers during start-up.

How do you size the return-air opening?

The intake opening must be large enough so the unit does not work against negative pressure that strains it. We check the unit data and plenum requirements and decide size and position at the survey, because placing it behind a closed door or away from occupied areas changes the calculation.

Does a large room need more than one air outlet?

Usually, yes. A long majlis or a wide living room cannot be served by one outlet, because the air cools one end and leaves the other. We spread the outlets along the room, split the branch between them, and keep them away from the return grille so cool air does not go straight back to the unit.

Does the duct material affect sweating and airflow balance?

Yes. Sheet metal duct holds its shape under air pressure, so flow quantities stay as designed. Flexible duct can compress or sag, changing its cross-section and upsetting the balance. We therefore fabricate the main branches from galvanised sheet in our workshop and use flexible duct only for the shortest possible connection at each diffuser.

Do you balance airflow in villas where rooms are far apart?

Yes. We size each branch and place diffusers after a site survey or reviewing drawings, so every room receives even airflow without noticeable variance.

How does duct made in Jeddah reach my site in Riyadh and when does installation happen?

We fabricate the duct to the approved sizes, supply it to your Riyadh site, and confirm the delivery and installation dates with you in the quote.

Does Riyadh's dust and extreme heat affect the duct system?

Dust enters through return-air grilles if they are not sealed, and extreme heat makes insulation essential where duct crosses roofs or unconditioned spaces. We install insulated duct and sealed return grilles to keep the system efficient.

When should duct installation happen in a villa under construction?

After the structure and main electrical runs are complete, and before the false ceilings go up, so we can install and test the duct without rework. Coordinate timing with us and your contractor.

Get even airflow in every room

WhatsApp a photo of the floor plan or site and your unit details, and we will book a survey in your district, Saturday to Thursday.

CallWhatsApp