AC duct installation in Madinah, Madinah Region

AC duct installation in Madinah balances hotels and dense residential towers with hospitals and schools. We are based in Jeddah: we fabricate the duct in our workshop, supply it to your Madinah site, install it and test it before handover.

4.9 on Google
  • Sized branches
  • Sealed insulation
  • Clean return path

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia, Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox, Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

Is it for you?

When you need a properly designed duct fit

  1. 1

    One room cold, another warm

    The unit runs but one room is too warm while the next is too cold. The cause is usually unbalanced branches or a diffuser that was never adjusted, not a fault in the unit itself.

  2. 2

    Duct sweating and water on the ceiling

    Uninsulated cold duct sweats on the outside and water collects on the plasterwork above. Proper insulation with Armaflex or Kimmco stops the problem before it damages the ceiling finish.

  3. 3

    Installing a concealed unit in a new build

    The right time to fit duct properly is during the fit-out, before the false ceiling closes. We agree plenum dimensions, branch sizes and the return-air route at the survey before any work starts.

Who it's for

  • Fitting a concealed unit in your new villa

    Before the false ceilings close, we design the plenums, branches and return-air route to suit the unit and each room in the villa.

    Ask on WhatsApp
  • Sweating ceiling and uneven airflow in your building

    We inspect the existing branches and return-air path, re-insulate the cold duct, and set the dampers so temperature evens out across every section of the building.

    Ask on WhatsApp

What the job covers

What the duct installation covers

  • Supply and return plenums
  • Sized branch to each room
  • Armaflex or Kimmco insulation
  • Diffuser balancing with dampers
  • Airflow check before ceiling closes
Request a quote

How we work

How we work

  1. 1

    Site and unit survey

    We measure the rooms and study the unit's data and plenum spec, and we settle the return-air route before deciding on branch sizes.

  2. 2

    Design branches and plenum

    We size each branch so it takes the right share of air without starving rooms farther from the unit, and we plan a return path with a correctly sized intake opening.

  3. 3

    Fit and insulate

    We fix the plenums and branches using SMACNA-standard duct, then insulate every cold surface with a sealed layer suited to the building's conditions and its city's climate.

  4. 4

    Balance and hand over

    We set each diffuser damper and check airflow in every room with you before the false ceiling is closed, then leave the site clean.

Start with step one

Why Alrabih?

Designed duct or just connected duct?

AlrabihThe usual way
Branch sizingCalculated per roomConnected without sizing
Return airRouted with a sized intakeLeft to chance
Duct insulationSealed against sweatingThin or absent
Diffuser balanceDamper set per roomAll diffusers fully open
Pre-closure airflow checkDone with you before closingFaults found after ceiling closes
Request a quote

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we have completed.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Browse all our work Similar project? Send us the details

Customer reviews

What our customers say

4.9

From 21 Google reviews

  • Waleed Daadouch

    “The nicest treatment from the showroom team, and their prices are very competitive.”

    Translated from Arabic

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • RHAM rhamLocal Guide

    “May God grant them success. Refined and respectful treatment.”

    Translated from Arabic

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Shakeel Ahmed

    “Nice experience very cooperative. Nice conducting with all customers”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Where we work

AC duct installation in cities near Madinah

We are based in Jeddah, and we supply duct and install across the Kingdom. All our services in Madinah

What sets this city apart

Hotels and residential towers in Madinah stand on a plateau among fertile fields, with hospitals and schools spread around. Duct must accommodate multiple uses and meet higher hygiene standards in hospitals and schools. Intense summers and mild winters mean duct works at high efficiency in heat and adapts in cooler months. Insulation and controlled return are essential everywhere.

Madinah is a holy city on a plateau with palm groves and green fields, built with hotels, towers, government, education and health facilities.

A common hotel setup in Madinah is concealed units with multi-floor ductwork, a central return path and humidity management.

All our services in Madinah

The AC setup in Madinah

  1. 1

    Multi-floor duct with central return

    In Madinah hotels and towers, the main duct rises many floors with branches for each floor and a central return path.

  2. 2

    Humidity management on return path

    Carefully designed duct reduces humidity buildup on return paths, especially in warm and potentially humid areas.

  3. 3

    Access panels for routine cleaning

    Cleaning and inspection access is regularly spaced in hospital and school duct, so the system stays clean and safe.

Before the visit

Before our visit in Madinah

  1. 1

    Provide architectural and engineering plans

    Send architectural drawings and engineering plans for other services, because duct must coordinate with electrical, plumbing and other runs.

  2. 2

    Clarify hygiene and comfort requirements

    In hospitals and schools, tell us about hygiene standards and required clearances for monitoring and cleaning equipment.

  3. 3

    Arrange site access for duct delivery

    Tell us the site access and space available for unloading delivered duct, especially in busy buildings.

FAQ

Questions about AC duct installation

Why does duct sweat and cause dampness on the ceiling?

Warm air condenses the moment it meets a cold duct surface. A site survey establishes the precise requirements based on the building's conditions and its city's climate, then we insulate with a sufficient layer of Armaflex or Kimmco with all joints sealed, raising the outer surface temperature above the dew point and stopping the sweating.

Does a longer branch deliver less air to the room?

Yes, a longer branch resists airflow more than a short one. This is why we size each branch individually, so near and far rooms receive balanced quantities of air, and we complete the adjustment with dampers during start-up.

How do you size the return-air opening?

The intake opening must be large enough so the unit does not work against negative pressure that strains it. We check the unit data and plenum requirements and decide size and position at the survey, because placing it behind a closed door or away from occupied areas changes the calculation.

Does a large room need more than one air outlet?

Usually, yes. A long majlis or a wide living room cannot be served by one outlet, because the air cools one end and leaves the other. We spread the outlets along the room, split the branch between them, and keep them away from the return grille so cool air does not go straight back to the unit.

Does the duct material affect sweating and airflow balance?

Yes. Sheet metal duct holds its shape under air pressure, so flow quantities stay as designed. Flexible duct can compress or sag, changing its cross-section and upsetting the balance. We therefore fabricate the main branches from galvanised sheet in our workshop and use flexible duct only for the shortest possible connection at each diffuser.

Does duct design differ between hospitals and hotels in Madinah?

Yes. Hospitals need higher hygiene standards with separate return grilles and easy cleaning access, while hotels prioritise comfort and quiet. We design each system for the building's specific needs.

You are based in Jeddah, how does duct reach hospital and school sites in Madinah?

We fabricate the duct to the approved design and supply it to your Madinah site, confirming delivery and installation dates with you in the quote.

How does the duct handle temperature and humidity changes between summer and winter?

Proper insulation and sizing maintain performance in hot summers, and carefully designed duct adapts to relative winter coolness without condensation or leakage.

Can duct in hospitals be cleaned easily for hygiene?

We design access points and return grilles to allow regular cleaning and inspection, and use sections and shapes that are easy to clean in hospitals and schools.

Get even airflow in every room

WhatsApp a photo of the floor plan or site and your unit details, and we will book a survey in your district, Saturday to Thursday.

CallWhatsApp